Information

FFC-FPC Equipment
Timer Interconnection System
Application Tooling and Equipment
Catalog 889759-3
Revised 7-2011
All specifications subject to change. Consult TE Connectivity for latest specifications.
2-214
For more detailed information please visit our websites:
www.tooling.te.com • www.tooling.te.com/europe • www.tooling.te.com/china
The very easy-to-handle
10 position hand tool allows
variable settings for both the
foil stop and foil guide. A
correct and repeatable crimp
process is achieved by an
integrated ratchet mechanism.
A FFC hand tool case can be
built up around your particular
application requirements.
FFC Hand Tool
The Termination Machine is an
electrical driven semi-automatic
assembly machine that uses
different applicators to terminate
reel-feed FFC contacts to
manually supplied FFC cables.
The machine terminates a
predefined number of contacts
to the supplied cable end.
TE Connectivity products
FFC MQS, FFC AMPMODU .100,
Junior Timer, AMPMODU .50
and soldered contacts are
compatible.
FFC Termination
Machine for Flexible
Sensor Foil
The FFC Applicator is designed
for FFC and FPC termina-
tions. It is normally delivered
with a special TE Connectivity
crimp machine, but is also
compatible with standard
presses (press stroke 40 mm),
if a wire feed is supplied.
FFC Applicator
The adjustment of the crimp
height is similar to other
TE Connectivity crimp appli-
cators. All wear parts are easy
to change.
The FFC Applicator is available
for different TE Connectivity
contacts, such as:
• FFC MQS,
• FFC Junior Timer,
• FFC AMPMODU .100,
• FFC AMPMODU .050,
• FFC Card Edge,
• FFC ACTION PIN and
• FFC Soldering Pin.
■ Quick-change of applicator
■ Alignment of the cable is realized in the machine
■ Interchangeable applicators available for different products
■ Number of pins can be programmed (max. 38 mm with pitch 2.54 mm)
■ Pitch 1.27 mm up to 5.08 mm can be programmed
■ Individual wire positions can be skipped
■ Operator friendly interface via touch screen
■ Integrated crimp force monitoring by CQM (optional)
The tool allows crimp connec-
tions to be made between foil
and 1 to 10 position MQS
terminals. The crimp height is
set for 70 mm thick foil.