Information
42
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
AMPLIMITE Subminiature D Connectors
Plug/Receptacle Mating and Panel Mounting Specifications
Plug/Receptacle Mating
Panel Mounting
The .265 [6.73] dimension
is required to assure full
m
ating of connector halves.
This dimension must be
taken into consideration
when determining the
method of mounting, panel
thickness, etc.
Cutout for Rear Mount and
Short Latching Block
Most plugs and receptacles
can be mounted to a panel
from either the front or rear,
using a variety of accessory
hardware. Posted receptacles
are rear panel mounted only.
Typical examples are shown
below.
Typical Front-Panel Mounted
Subminiature D Plug
Typical Rear-Panel Mounted
Subminiature D Receptacle
Shell
Mounting
Size
Method
Dimensions
(Pos.)
Front/Rear
ABCDEF*H* *J* K
Panel
.984 .492 .874 .437 .513 .257 .083
1
Front
24.99 12.50 22.20 11.10 13.03 6.53
——
2.11
(9)
.984 .492 .806 .403 .449 .225 .550 .750 .132
Rear
24.99 12.50 20.47 10.24 11.41 5.72 13.97 19.05 3.35
1.312 .656 1.202 .601 .513 .257 .083
2
Front
33.33 16.66 30.53 15.27 13.03 6.53
——
2.11
(15)
1.312 .656 1.134 .567 .449 .225 .730 .750 .132
Rear
33.33 16.66 28.80 14.40 11.41 5.72 18.54 19.05 3.35
1.852 .926 1.743 .872 .513 .257 .083
3
Front
47.04 23.52 44.27 22.15 13.03 6.53
——
2.11
(25)
1.852 .926 1.674 .837 .449 .225 1.275 .750 .132
Rear
47.04 23.52 42.52 21.26 11.41 5.72 32.39 19.05 3.35
2.500 1.250 2.391 1.196 .513 .257 .083
4
Front
63.50 31.75 60.73 30.38 13.03 6.53
——
2.11
(37)
2.500 1.250 2.326 1.163 .449 .225 1.920 .750 .132
Rear
63.50 31.75 59.08 29.54 11.41 5.72 46.05 16.13 3.35
2.406 1.203 2.297 1.149 .623 .312 .083
5
Front
61.11 30.56 58.34 29.19 15.82 7.93
——
2.11
(50)
2.406 1.203 2.218 1.109 .555 .278 1.753 .750 .132
Rear
61.11 30.56 56.34 28.17 14.10 7.06 44.52 19.05 3.35
**Panel cutout configuration with H and J dimensions provides clearance for mounting connectors with cable clamps.
**This dimension is .190
±002
[4.83
±0.05
] when posted connectors with fixed female screwlocks are rear-panel mounted.
Note: Cutouts are for either plug or receptacle, front or rear panel mount.
.265
±.015
[6.73
±0.381
]
for Shell Sizes 1 and 2
.
256
±.015
[6.50
±0.381
]
for Shell Sizes 3, 4 and 5
Receptacle
(Typ.)
10°
±2
(2 Pls.)
K
Radius
(
4 Pls.)
.120
±.002
Dia.**
[3.05
±
0.050
]
Dia.**
Typ. (2 Pls.)
A
B
C
D
F
E
H
*
J
*
Plug
(Typ.)
A
.040
Dia.
[1.02]
Dia.
Typ. (2 Holes)
.129
± .002
[3.28
±
0.050
]
Right-Angle Posted Connectors