Information
13
Catalog 82068 Dimensions are shown for Dimensions are in inches and Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. millimeters unless otherwise Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
AMPLIMITE Subminiature D Connectors
Note: All part numbers are RoHS compliant.
AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued)
AMPLIMITE .050 Series
Connectors, Series III
Shielded Plugs
(Continued)
.050
[1.27]
Terminating Cover
.327
[8.31]
E
D
B
.100
[
2.54]
.224
[5.69]
.588
[14.94]
P
lug Housing
P
lug Shell
T
erminating Cover
S
hielded Plug with Unassembled
Standard Termination Covers
Shielded Plug with Assembled or Unassembled Standard Termination Covers
No. of
Dimensions Part Numbers
Pos.
BDEw/Rails & Latchblocks w/Latchblocks
.450 .829 .293
20
11.43 21.06 7.44
5749111-1 5749621-1
.600 .979 .293
26
15.24 24.87 7.44
1-5749111-0 5749621-2
.650 1.029 .293
28
16.50 26.14 7.44
— 5749621-3
.950 1.329 .293
40
24.13 33.76 7.44
5749111-3 5749621-4
1.200 1.579 .293
50
30.48 40.11 7.44
5749111-4 5749621-5
1.650 2.029 .293
68
41.91 51.54 7.44
5749111-6 5749621-7
1.950 2.329 .373
80
49.53 59.16 9.47
5749111-7 5749621-8
2.450 2.829 .373
100
62.23 71.86 9.47
5749111-8 5749621-9
2.950 3.329 .373
120
74.93 84.56 9.47
5749111-9 1-5749621-0
Notes: 1. Plug connector requires backshell kit for complete assembly and must use round jacketed cable (discrete
or laminated). Refer to pages 16-19 for backshell kit part numbers.
2. For termination tooling, see pages 28 & 29.
3. The CHAMPOMATOR 2.5 Automatic Termination Machine will accept diameters as low as .023 [0.58].
Shielded Plug with Assembled
Standard Termination Covers
Materials:
Housing and Covers—
Thermoplastic, 94V-0 rated, black
Contacts—Phosphor bronze, duplex
plated .000030 [0.00076] min. gold on
mating end, tin on termination end, all
underplated nickel
Shell—Steel, plated tin-nickel alloy
over nickel over copper
Recommended wire size
3
—
28 AWG [0.08-0.09mm
2
] or
30 AWG [0.05mm
2
], solid or
7 strand, with a .029-.036
[0.74-0.89] insulation diameter.
Technical Documents:
Product Specifications—108-1228
Application Specifications—
114-40029
Instruction Sheet—408-9427
Connectors With Standard Termination Covers
Note: Refer to TE Customer drawings and Application Spec for PCB & panel layouts.