Information

ManualsBrandsTE CONNECTIVITY ManualsD-SUB ConnectorsD-SUB receptacles 180 ° Number of pins: 9 Print AMPLIMITE HD-20 1 pc(s)

AMPLIMITE

Subminiature D Connectors

TE Connectivity Catalog 82068 Revised 4-12

te.com

82068 LUG PDF 04/2012

TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company

names might be trademarks of their respective owners.

AMPLIMITE Subminiature D Connectors

Summary of content (160 pages)

PAGE 1
TE Connectivity Catalog 82068 Revised 4-12 © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 82068 LUG PDF 04/2012 TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. AMPLIMITE Subminiature D Connectors te.
PAGE 2
AMPLIMITE Subminiature D Connectors Introduction AMPLIMITE family of Subminiature D connectors is the industry’s most extensive and versatile. These subminiature D connectors have become the most popular type of input/output (I/O) connectors in use today. Established and proven, they are rugged, easily used and have been widely adopted in standards for serial communications, telecommunications and local area networks (LANS).
PAGE 3
AMPLIMITE Subminiature D Connectors Table of Contents AMPLIMITE .050 Series Connector (.050 x .100 [1.27 x 2.54] Centerline) Series III Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5 Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Right-Angle Receptacle Headers . . . . . . . . . . . . . . . . . . . .7 Vertical Mount Receptacle Headers . . . . . . . . . . . . . . . .8, 9 Vertical Mount Receptacle Headers with ACTION PIN Contacts . . .
PAGE 4
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Connector (.050 x .100 [1.27 x 2.54] Centerline) Series III Product Facts AMPLIMITE .050 Series Connectors, Series III ■ ■ ■ ■ ■ ■ ■ ■ ■ Compatible with SCSI-2, SCSI-3, EIA RS-232, ISO-11569*, HIPPI, IPI-2 and IEE 802.
PAGE 5
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Connector (.050 x .100 [1.27 x 2.54] Centerline) Series III (Continued) Product Facts ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ The compact design of the right-angle header package measures only 1.230 W x .588 D x .300 H [31.24 W x 14.94 D x 7.62 H] for maximum board real estate conservation. Right-angle PCB headers feature integral boardlocks for positive board retention and grounding.
PAGE 6
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Assemblies, Series III AMPLIMITE .050 Series Connectors, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE .050 Series cable assemblies that meet other impedance requirements or other lengths consult TE. SCSI-2 SCSI-1 to SCSI-2 RS-232 (Alternate) to RS-232 RS-232 (Alternate) IPI-2 and HIPPI 2 Feet Part Numbers 2 Meters 3 Meters SCSI-2 50 pos. .
PAGE 7
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Right-Angle Receptacle Headers, Series III .463 [11.76] AMPLIMITE .050 Series Connectors, Series III .118±.003 [3.00±0.08] K Materials: G E Housing — Thermoplastic, 94V-0 rated, black. SMT compatible Shell — Steel, plated bright nickel over copper Bracket — Zinc, plated nickel over copper Contacts — Phosphor bronze, duplex plated [.000030] 0.00076 min. gold on mating end; tin on solder end; all underplated nickel Position 1 F .050 Typ. [1.
PAGE 8
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers With Through-Hole Tails, Series III L P AMPLIMITE .050 Series Connectors, Series III Position 1 Position 2 Position 3 .406 [10.31] Materials: Housing—Thermoplastic, 94V-0 rated, black. SMT compatible Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on mating end; tin on solder end; all underplated nickel .350 [8.
PAGE 9
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers With Through-Hole Tails, Series III (Continued) .120 [3.05] Solder Tail Length A D .763 [19.38] Typ. Position 1 Typ. 2-56UNC-2B 4 Holes AMPLIMITE .050 Series Connectors, Series III .050 [1.27] Typ. ±.008 B [±0.20] C Last Position Typ. .120±.007 [3.05±0.18] Typ. E Rails and Latch Blocks Materials: Housing—Thermoplastic, 94V-0 rated, black.
PAGE 10
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers, Series III, with ACTION PIN Contacts (.050 x .100 [1.27 x 2.54] Centerlines) Product Facts AMPLIMITE .050 Series Connectors, Series III ■ Recognized under the Component Program of the Underwriters Laboratories, Inc., File No. E28476 R ■ ■ Certified by Canadian Standards Association, File No.
PAGE 11
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Vertical Receptacle Headers, with ACTION PIN Tails, Series III P Position 2 Position 1 AMPLIMITE .050 Series Connectors, Series III 2-56 Thread 2 Plc. .406 [10.31] Last Position L Materials: Housings—Thermoplastic, 94V-0 rated, black, SMT compatible Shell—Carbon steel, plated bright tin over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 12
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Plug Connectors, Series III Shielded Plugs B AMPLIMITE .050 Series Connectors, Series III .050 [1.27] Typ. .100 [2.54] Typ. .224 [5.69] Shielded Plug ±.003 D [±0.08] ±.003 Mating Face A [±0.08] Typ. Shell .588±.010 [14.94±0.25] Typ. .327 [ +.003 -.002 +0.08 8.31 -0.05 ] Housing Wire Lacing Termination Covers Termination Area Typ.
PAGE 13
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued) Shielded Plugs (Continued) .100 [2.54] Plug Shell .224 [5.69] Shielded Plug with Unassembled Standard Termination Covers AMPLIMITE .050 Series Connectors, Series III B .050 [1.27] Terminating Cover .588 [14.94] E Plug Housing D .327 [8.
PAGE 14
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Plug Connectors, Series III (Continued) AMPLIMITE .050 Series Connectors, Series III AMPLIMITE .050 Series Connector Application Tooling for Use with Wire Lacing Termination Covers Manual Arbor Frame Assembly—Part No. 58024-1 Equipped with Cover Lacing Assembly—Part No. 91293-1 (Includes Seating Bars for 50 and 100 Positions). See Table 3 for Seating Bar Part Numbers. Extra Lacing Stations available for use with Lacing Assembly—Part No.
PAGE 15
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Cable Receptacle Connectors, Series III Shielded Receptacles .050 [1.27] Terminating Cover AMPLIMITE .050 Series Connectors, Series III .592 [15.04] Ref. B E Shielded Receptacle with Assembled Termination Covers Receptacle Housing Receptacle Shell Materials: Housing and Covers— Thermoplastic, 94V-0 rated, black Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 16
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Jackscrews, Series III Cable Supplied By Customer Strain Relief Staple (1 Supplied) AMPLIMITE .050 Series Connectors, Series III Jackscrew 2-56 Thd.
PAGE 17
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Jackscrews, Series III (Continued) No. of Pos. Style Dimensions B A C Pkg. 40 B 1.822 46.25 1.830 46.48 .456 11.58 Bulk Bulk 50 68 100 A B A 1.270 32.26 2.085 52.96 .480 12.19 1.887 47.93 1.822 46.28 2.082 52.88 1.695 43.05 2.645 67.18 2.525 64.14 3.325 84.46 3.325 84.46 .660 16.76 .564 14.33 .615 15.62 .595 15.11 Individual Bulk Bulk Individual Individual Individual .450 11.43 .400 10.16 .
PAGE 18
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches, Series III AMPLIMITE .
PAGE 19
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Backshell Kits, With Spring Latches, Series III (Continued) Straight Exit with Latches Angled Exit with Latches Individual .270 6.86 5749190-1 5749199-1 .400 10.16 Individual .270 6.86 — 5749609-1 .400 10.16 Individual .270 6.86 749608-2 — .320 8.13 — 5749201-1 .320 8.13 5749192-1 — Individual .400 10.16 — 5749202-2 Bulk .400 10.16 5749202-3 — .355 9.02 5749193-1 — .400 10.16 5749193-2 — Bulk .480 12.
PAGE 20
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Shielded Enclosure Kits, With Male Jackscrews, Series III AMPLIMITE .050 Series Connectors, Series III 68-Position Material and Finish: Backshells—Zinc Boot—PVC, black Jackscrews—Stainless steel and PVC, black Staple—Carbon steel, plated tin over nickel Screws—Stainless steel, #2-56 threads Technical Documents: Product Specifications—108-1228 Application Specifications— 114-40029 .550 [13.97] Max. Dia. Cable Supplied by Customer 1.887 [47.
PAGE 21
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Receptacle Assemblies Without Rails, With Latch Blocks, Series III AMPLIMITE .050 Series Connectors, Series III C Recessed Cavity Identification .050 [1.27] Typ. .406 [10.31] Materials: 2-56 UNC* 2 Plc. Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 22
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Flat Top Receptacle Assemblies Without Rails and Latch Blocks, Series III C AMPLIMITE .050 Series Connectors, Series III .050 [1.27] Typ. Cavity Identification Terminating Cover .406 [10.31] Receptacle Housing 4-40 UNC 2 Plcs. Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .
PAGE 23
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Plug Assemblies With Rails, Latch Blocks, Series III Plug C AMPLIMITE .050 Series Connectors, Series III .050 Typ. [1.27] Recessed Cavity Identification .406 [10.31] 2-56 UNC 2 Plc. Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 24
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Plug Assemblies With Rails, Latch Blocks, Series III (Continued) C AMPLIMITE .050 Series Connectors, Series III .050 [1.27] Typ. Cavity Identification .406 [10.31] 2-56 UNC* 2 Plc. Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Shell—Steel, plated bright nickel over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 25
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Plug Assemblies Unshielded for .025 [0.64] Centerline Ribbon Cable, Series III .050 Typ. [1.27] Plug Assembly AMPLIMITE .050 Series Connectors, Series III E ±.003 [±0.08] Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min. gold on mating end, bright tin on termination end, all over nickel underplating Recommended wire size— .025 [0.64] centerline, 30 AWG [0.
PAGE 26
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Hardware and Dust Covers, Series III Screwlock Kits .187 [4.75] Materials: AMPLIMITE .050 Series Connectors, Series III Stainless steel (female) Steel, zinc plated black (male) Screwlock (2 Supplied) #2-56 Thd. Related Product Data: Used with the following connectors: Right-Angle Receptacle Header— page 7 Vertical Receptacle Header— pages 8-11 Panel Mount Plug and Receptacle Headers—pages 21 & 22 .062 Panel [1.57] .177 [4.50] Male Part No.
PAGE 27
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Performance Specifications and Technical Documents Performance Specifications for Right-Angle, Vertical and .050 Centerline Cable Products Mating Cycles (Durability): 500 max. Current Rating (30°C T-Rise): 1A max., 50% energized AMPLIMITE .050 Series Connectors, Series III Termination Resistance (Mated): 25 milliohms max. Insulation Resistance: 1000 megohms min. Dielectric Withstanding Voltage: 500 VAC Header Processing Temperature: +220°C max.
PAGE 28
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Application Tooling, Series III Discrete Wire Application Tooling AMPLIMITE .050 Series Connectors, Series III To meet medium to high volume production of dis-crete wire terminations, TE offers the following tooling: The CHAMPOMATOR Model 2.5 Bench Terminating Machine— Part No. 354786-1, used in conjunction with Control Module—Part No. 852423-▫, and Tie Bar—Part No. 762637-▫ (Table No. 1). Control Module Part No.
PAGE 29
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Application Tooling, Series III (Continued) Cover Closing/ Termination Tooling AMPLIMITE .050 Series Connectors, Series III Manual Miniature Applicator Frame Assembly— Part No. 91295-1 This Frame requires Cover Closing Kit—Part No. 543508-1 Cable Staple Tooling To provide cable strain relief use Manual Miniature Applicator Frame Assembly— Part No. 91295-1. This Frame requires Staple Insertion Kit—Part No.
PAGE 30
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors Product Facts AMPLIMITE .050 Series Connectors, Series III Compact design, profile for the right-angle header 1.230 x .588 [31.24 x 14.94], vertical header 1.230 x .433 [31.24 x 11.00], right-angle stacked headers 1.230 x .803 [31.24 x 20.
PAGE 31
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Right-Angle Header, Receptacle .118 [3.00] AMPLIMITE .050 Series Connectors, Series III Date Code Marked In Area Indicated .975 [24.77] .588 [14.94] Position 1 Part No. 750823-1 .300 [7.26] Material and Finish .100 [2.54] 1.230 [31.
PAGE 32
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Shielded Right-Angle Stacked Header, Receptacle Shield Date Code Marked In Area Indicated AMPLIMITE .050 Series Connectors, Series III .168 [4.27] .215 [5.46] 2 Plc. .870±.015 [22.10±0.38] .803 [20.40] Position 1 With Shielding Position 1 Position 26 .635 [16.13] 1.230 [31.24] Position 26 Without Shielding Material and Finish: .363 [9.22] .050 [1.27] Typ.
PAGE 33
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) Cable Connector, Plug AMPLIMITE .050 Series Connectors, Series III Part No. 750833-1 Material and Finish: .275 [6.99] Housing and Termination Covers— UL 94V-0 rated thermoplastic, black Shell—Steel, plated bright tin over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 34
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors (Continued) AMPLIMITE .050 Series Connectors, Series III Backshell Kits 1.745 [44.32] Material and Finish: Backshells—Copper-nickel alloy Jackscrews—Steel, plated tin over copper, handles covered with ABS, gray Keyed and Unkeyed Inserts—Zinc, plated tin over copper Outside Covers—ABS, gray 1.250 [31.75] .330 [8.38] Connector shown for illustration purposes only, must be purchased separately. .805 [20.
PAGE 35
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Slimline Connectors, Application Tooling Discrete Wire Application Tooling The CHAMPOMATOR Model 2.5 Bench Terminating Machine— Part No. 354786-1, used in conjunction with Control ■, Module—Part No. 852423-■ and Tie Bar—Part No. 1-762637-3. Note: CHAMPOMATOR 2.5 Machine and Control Module must be ordered separately by part number. Control Module Part No. 852423-1 120 VAC 852423-2 100 VAC 852423-3 230 VAC AMPLIMITE .
PAGE 36
AMPLIMITE Subminiature D Connectors Shielded AMPLIMITE .050 Series Contact Arrangements, Performance Specifications, Technical Documents—Slimline Connectors A AMPLIMITE .050 Series Connectors, Series III Contact Arrangements Position 1 C B Note: Mating face of receptacle is shown, plug is mirror image. No. of Pos. 26 A 13 Position No. B C 14 26 Performance Specifications Mating Cycles (Durability): 500 max. Current Rating (30°C T-Rise): 1A max.
PAGE 37
AMPLIMITE Subminiature D Connectors AMPLIMITE .050 Series Panel Mount Receptacle Assemblies for .025 [0.64] Centerline Ribbon Cable, Series III E ±.006 [±0.15] .050 [1.27] Typ. AMPLIMITE .050 Series Connectors, Series III .406 [10.31] see table Materials: Housing and Termination Covers— Thermoplastic, 94V-0 rated, black Shell—Steel, plated bright tin over copper Bracket—Zinc, plated nickel over copper Contacts—Phosphor bronze, duplex plated .000030 [0.00076] min.
PAGE 38
AMPLIMITE Subminiature D Connectors Right-Angle Posted Connectors Right-Angle Posted Connectors Connector Density Type Style and Shell Finish No. of Contact Positions Footprint HD-22 Plug and Receptacle Front Metal-Shell, Tin Plated (Pg. 52) 15 26 44 62 78 .350 [8.89] 9 15 25 37 50 Plugs and Receptacles Full Metal-Shell With and Without Grounding Indents, Tin Plated (Pgs. 71, 139, 155) Front Metal-Shell With Grounding Indents, Tin Plated (Pgs.
PAGE 39
AMPLIMITE Subminiature D Connectors Right-Angle Posted Connectors (Continued) Product Facts: ■ HD-20 and HD-22 connector contacts are available in plating types to satisfy different applications Flame retardant thermoplastic housing material, UL 94V-0 rated ■ HD-20 right-angle connectors are available in 9, 15, 25 and 37 positions (Shell Sizes 1 thru 4) in both plug and receptacle versions; some versions available in 50 position, (Shell Size 5) ■ HD-22 right-angle posted connectors are designed for
PAGE 40
AMPLIMITE Subminiature D Connectors HD-22 and HD-20 Commercial Connectors (AMPLIMITE) Contact Arrangements HD-22 Inserts Shell Size 2 (26 Position) Right-Angle Posted Connectors Shell Size 1 (15 Position) Shell Size 3 (44 Position) Shell Size 4 (62 Position) Shell Size 5 (78 Position) HD-20 Inserts Shell Size 2 (15 Position) Shell Size 1 (9 Position) Shell Size 3 (25 Position) Shell Size 4 (37 Position) Shell Size 5 (50 Position) Note: Mating face of plug is shown, receptacle is mirror-image.
PAGE 41
AMPLIMITE Subminiature D Connectors HD-22 and HD-20 Connectors Performance Characteristics Cable Connectors Connector Type HDE-20 HDP-22 HDP-20 Electrical Characteristics 20 AWG [0.6mm2] 3 amperes 20 AWG [0.6mm2] 7.5 amperes 30 milliohms (max.) 15 milliohms (max.) 1000 VAC min. 1000 VAC min. 1000 VAC min. 5000 megohms min. 5000 megohms min. 5000 megohms min. Termination Resistance Dielectric Withstanding Voltage Insulation Resistance Right-Angle Posted Connectors 22 AWG [0.4mm2] Wire 5.
PAGE 42
AMPLIMITE Subminiature D Connectors Plug/Receptacle Mating and Panel Mounting Specifications .265 ±.015 [6.73±0.381] for Shell Sizes 1 and 2 .256 ±.015 [6.50±0.381] for Shell Sizes 3, 4 and 5 Right-Angle Posted Connectors Plug/Receptacle Mating Plug (Typ.) The .265 [6.73] dimension is required to assure full mating of connector halves. This dimension must be taken into consideration when determining the method of mounting, panel thickness, etc. Receptacle (Typ.) Panel Mounting A .120 [3.05±0.
PAGE 43
AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles Product Facts Stacked pcb connectors save board real estate ■ Wide choice of configurations available ■ Front Metal-Shells for EMI/RFI shielding ■ Housings made of UL 94V-0 rated thermoplastic ■ Plug connectors have builtin grounding indents ■ Choice of 4-40 threaded insert or female screwlock mating hardware ■ Hybrid styles provide maximum selectivity and permit mixing of signal sp
PAGE 44
AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles (Continued) Material and Finish: HD-20 Subminiature D Stacked PCB Connectors Housing—94V-0 rated thermoplastic, black Shell—Steel, tin plated Contacts: Pins—Brass Sockets—Phosphor bronze Contact Plating: A—Gold flash on mating end, tin on solder tails with overall nickel plating underneath B—.000010 [0.00025] gold on mating end, tin on solder tails with overall nickel underplate C—.000030 [0.
PAGE 45
AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles Upper D-Sub 15p Rcpt. 25p Plug 25p Plug 25p Rcpt. 25p Rcpt. 37p Plug 37p Plug / / / / / / / / 15p Rcpt. 15p Plug 25p Plug 25p Rcpt. 25p Rcpt. 25p Plug 37p Plug 37p Rcpt. D 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.
PAGE 46
AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles (Continued) Upper D-Sub HD-20 Subminiature D Stacked PCB Connectors 37p Rcpt. 37p Rcpt. Lower D-Sub / / 37p Rcpt. 37p Plug D 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 Dimensions E 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 F .750 19.05 .750 19.05 .750 19.05 .
PAGE 47
AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles HD-20 Front Metal Shell, Right-Angle AMPLIMITE Connectors Material and Finish: HD-20 Subminiature D Stacked PCB Connectors Housings and Pin Spacer—94V-0 rated thermoplastic, black Contacts: Sockets—Phosphor bronze or brass Contact Plating— Gold flash on mating end, tin on termination end, with entire contact nickel underplated Shell—Steel, tin plated Boardlocks—Copper alloy, plated tin Brack
PAGE 48
AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles (Continued) HD-20 Front Metal Shell, Right-Angle Connectors Material and Finish: HD-20 Subminiature D Stacked PCB Connectors Housing—94V-0 rated PBT, see table Contacts—Phosphor bronze or brass HD22 Receptacle Contact Plating— Gold flash on contact area, tin on solder tail area, all over nickel underplated Audio Jack—.000100 [.00254] min.
PAGE 49
AMPLIMITE Subminiature D Connectors AMPLIMITE 2000 Subminiature D Connectors Product Facts Flame retardant housings, rated up to 105°C ■ Front metal-shell design ■ Duplex plated gold flash or .000015 [0.00038] min. gold on mating end, tin on solder end, all over nickel underplate ■ With boardlocks and 4-40 threads or female screwlocks ■ Designed to Office Class II ■ 9, 15 & 25 right-angle plugs and receptacles ■ Recognized under the Component Program of the Underwriters Laboratories, Inc.
PAGE 50
AMPLIMITE Subminiature D Connectors AMPLIMITE 2000 Subminiature Connectors (Continued) HD-20 Front Metal Shell Right-Angle Connectors #4-40 Insert See Table Material and Finish: Housing—94V-0 rated thermoplastic, black Shell—Steel, nickel plated Contacts: Pins—Brass Sockets—Phosphor bronze Contact Plating: A—Gold flash on mating end, tin on solder tails with overall nickel underplate B—.000015 [0.
PAGE 51
AMPLIMITE Subminiature D Connectors HD-20 and HD-22 Slimline Connectors 2 Rows of Soldertails Material and Finish: Housing—94V-0 rated thermoplastic, black Shell—Low carbon steel, nickel plated Contacts—Phosphor bronze or brass Contact Plating—Gold flash on mating area; .000100 [0.00254] min. tin on solder tail area; overall .000050 [0.00127] min.
PAGE 52
AMPLIMITE Subminiature D Connectors HD-22 Right-Angle Posted Subminiature D Connectors Right-Angle Subminiature D Connectors Product Facts ■ Flame retardant thermoplastic housing material, UL94V-0 rated ■ Low cost front metal shell design compatible with full metal-shell connectors ■ Integral boardlock versions secure connectors to pc boards prior to soldering ■ Contacts available in platings to satisfy different applications ■ Integral threaded inserts and screwlocks available ■ Recognized un
PAGE 53
AMPLIMITE Subminiature D Connectors HD-22 Right-Angle Posted Subminiature D Connectors (Continued) Material and Finish: Housing—94V-0 rated thermoplastic, black ▲ VESA Std. 15-position Receptacle Housing Material—Thermoplastic 94V-O blue per VESA Std. Shell—Steel, nickel plated Contacts Pins—Brass Sockets—Phosphor bronze Contact Plating— Gold flash, .000010 [0.00025] or .000030 [0.
PAGE 54
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount Post Size—.026 [0.66] Dia. Plug ± .015 A [± 0.381] ± .010 B [± 0.254] See Table .494±.015 [12.55±0.38] Typ. With Grounding Indents and Grounding Straps .026 [0.66] Dia. Contact Typ. .375±.010 [9.52±0.25] Typ. With Threaded Insert Grounding Indent Typ. Mating Face .125±.015 [3.18±0.15] Typ. D ± .015 .318±.015 [8.08±0.38] Typ. E [± 0.381] See Table .318 [8.
PAGE 55
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount (Continued) Post Size—.026 [0.66] Dia. Receptacle ± .015 A [± 0.381] ± .010 B [± 0.254] .494±.015 [12.55±0.38] With Grounding Straps See Table .026 [0.66] Dia. Typ. .125±.015 [3.18±0.38] Typ. Mating Face With Threaded Insert .243 [6.17] .740±.015 [18.80±0.38] Typ. .375±.010 [9.53±0.25] .318±.015 [8.08±0.38] Typ.
PAGE 56
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount (Continued) Post Size—.026 [0.66] Dia. Plug ± .015 A [± 0.381] ± .010 B [± 0.254] See Table .494±.015 [12.55±0.38] Typ. With Grounding Indents and Grounding Straps With Threaded Insert .026 [0.66] Dia. Contact Typ. .375±.010 [9.52±0.25] Typ. Grounding Indent Typ. Mating Face .125±.015 [3.18±0.15] Typ. D .318±.015 [8.08±0.38] Typ. ± .015 E [± 0.381] See Table .318 [8.
PAGE 57
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount (Continued) Post Size—.026 [0.66] Dia. Receptacle ± .015 A [± 0.381] ± .010 B [± 0.254] .494±.015 [12.55±0.38] With Grounding Straps See Table .026 [0.66] Dia. Typ. .125±.015 [3.18±0.38] Typ. Mating Face With Threaded Insert .243 [6.17] .740±.015 [18.80±0.38] Typ. .375±.010 [9.53±0.25] .318±.015 [8.08±0.38] Typ.
PAGE 58
AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 454 Mount Post Size—.025 [0.64] Sq. Receptacle ± .015 A [± 0.381] ± .010 B [± 0.254] .112 [2.84] .494±.015 [12.55±0.38] Material and Finish: Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts (Posted): Pin—Brass Socket—Phosphor bronze Contact Plating: A—.000030 [0.
PAGE 59
AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 454 Mount (Continued) Post Size—.025 [0.64] Sq. Plug ± .015 A [± 0.381] ± .010 B [± 0.254] .112 [2.84] Without Grounding Indents .494±.015 [12.55±0.38] .025 Sq. Post [0.64] Typ. .109±.010 Typ. [2.77±0.25] .274±.015 [6.96±0.38] Grounding Indents With Grounding Indents Grounding Indents Mating Face C .269±.010 [6.83±0.
PAGE 60
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 478 Mount Post Size—.026 [0.66] Dia. Plug ± .015 A [± 0.381] ± .010 B [± 0.254] See Table .494±.0.15 [12.55±0.381] Typ. With Grounding Indents and Grounding Straps See Table .026 [0.66] Dia. Contact Typ. With Threaded Insert .125±..015 [3.18±0.38] Typ. Grounding Indent Typ. Mating Face D With Fixed Female Screwlock .889±..015 [22.58±0.38] .534±.0.10 [13.56±0.25] Typ. .478±..015 [12.14±0.38] Typ.
PAGE 61
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 478 Mount (Continued) Post Size—.026 [0.66] Dia. Receptacle ± .015 A [± 0.381] ± .010 B [± 0.254] With Grounding Straps .494±.015 [12.55±0.38] See Table .026 [0.66] Dia. Typ. With Threaded Insert Mating Face .243 [6.17] .478±.015 [12.14±0.38] Typ. .534±.010 [13.56±0.25] Typ. .902±.015 [22.92±0.38] Typ. With Fixed Female Screwlock Material and Finish: .125±.015 [3.18±0.38] Typ.
PAGE 62
AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 545 Mount Post Size—.025 [0.64] Sq. Plug ± .015 A [± 0.381] ± .010 B [± 0.254] ± .015 C [± 0.381] Without Grounding Indents .025 [6.35] Sq. Post Typ. Grounding Indents See Table Mating Face D With Grounding Indents .600±.010 [15.24±0.25] Typ. .120 [3.05] Dia. Typ. ± .015 .545±.015 [13.84±0.38] (Mount) E [± 0.381] .120 [3.05] Dia. Typ. With 4-40 Female Screwlocks .125 +.030 -.015 [3.18 +0.76 -0.
PAGE 63
AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 545 Mount (Continued) Post Size—.025 [0.64] Sq. Receptacle ± .015 A [± 0.381] ± .010 B [± 0.254] ± .015 C [± 0.381] .025 [6.35] Sq. Post Typ. Mating Face .243 [6.17] With 4-40 Female Screwlocks .600±.010 [15.24±0.25] Typ. Material and Finish: .120 [3.05] Dia. Typ. Technical Documents: Product Specification—108-40025 Application Specification— 114-40013 .120 [3.05] Dia. Typ. Shell Size No.
PAGE 64
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 590 Mount Post Size—.026 [0.66] Dia. Plug ± .015 A [± 0.381] ± .010 B [± 0.254] See Table .494±.015 [12.55±0.38] Typ. With Grounding Indents and Grounding Straps .026 [0.66] Dia. Contact Typ. Mating Face Grounding Indent Typ. D With Threaded Insert .315±.010 [8.00±0.25] Typ. .590±.015 [14.99±0.38] Typ. ± .015 E [± 0.381] See Table .125±.015 [3.18±0.38] Typ. .590 [14.
PAGE 65
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 590 Mount (Continued) Post Size—.026 [0.66] Dia. Receptacle ± .015 A [± 0.381] ± .010 B [± 0.254] .494±.015 [12.55±0.38] See Table .026 [0.66] Dia. Typ. With Grounding Straps With Threaded Insert Mating Face .243 [6.17] .315±.010 [8.00±0.25] .590±.015 [14.99±0.38] .975±.015 [24.77±0.38] With Fixed Female Screwlock See Table Material and Finish: .125±.015 [3.18±0.38] Shell Size No.
PAGE 66
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount Receptacle—With Boardlocks With Threaded Insert .500±.015 [12.70±0.38] Typ. With Threaded Insert .243 [6.17] ±.015 A [±0.381] ±.010 .473±.015 [12.01±0.38] B [±0.254] See Table .452±.015 [11.48±0.38] .395±.010 [10.03±0.25] With Fixed Female Screwlock .125±.020 [3.18±0.51] Typ. Boardlock 2 Plc. Material and Finish: Mating Face .318 [8.
PAGE 67
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount (Continued) Plug .500±.015 [12.70±0.38] Typ. .473±.015 [12.01±0.38] ± .015 With Threaded Insert A [± 0.381] ± .010 #4-40 Threaded Insert, 2 Plc. B [± 0.254] .236 [5.99] Material and Finish: Housing—94V-0 rated thermoplastic, black Eyelets—Brass, tin plated Threaded Inserts—Zinc Boardlock—Copper alloy, tin plated Pin Contacts (Posted)—Copper alloy, duplex plated as follows: A—.000030 [0.
PAGE 68
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount (Continued) Post Size—.026 [0.66] Dia. Receptacle—Without Boardlocks ±.015 ±.010 A [±0.381] B [±0.254] #4-40 Threaded Insert 2 Plc. .452±.015 [11.48±0.38] With Standard Mounting Holes .026 [0.66] Dia. Post Typ. With Threaded Insert Mating Face .243 [6.17] .375 [9.53±0.381] Typ. ±0.15 With Fixed Female Screwlock .062 [1.58] R Typ. .125 [ 3.
PAGE 69
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount Receptacle—With Boardlocks .440±.015 [11.18±0.38] Typ. .243 [6.17] ±.015 A [±0.381] ±.010 B [±0.254] See Table .745±.015 [18.92±0.38] With Threaded Insert .452±.015 [11.48±0.38] .395±.010 [10.03±0.25] .125±.020 [3.18±0.51] Typ. Boardlock 2 Plc.
PAGE 70
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount (Continued) Post Size—.026 [0.66] Dia. Receptacle—Without Boardlocks ±.015 A [±0.381] ±.010 B [±0.254] .452±.015 [11.48±0.38] See Table .026 Post [0.66] Dia. Typ. With Threaded Insert Mating Face .243 [6.17] With Female Screwlock .530 [13.46] Typ. .125 [3.18] Dia.
PAGE 71
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount (Continued) Post Size—.026 [0.66] Dia. Plug—Without Boardlocks ±.015 ±.010 A [±0.381] B [±0.254] .452±.015 [11.48±0.38] See Table .026 [0.66] Dia. Post Typ. With Threaded Insert Mating Face .230±.006 [5.84±0.15] With Female Screwlocks .530±.015 [13.46±0.381] .125 [3.18] Dia.
PAGE 72
AMPLIMITE Subminiature D Connectors Right-Angle Mounting Connectors — European Standard Footprint Material and Finish: Plug with Boardlocks — Solder Termination Front Shell—Steel, tin plated Housing—Black glass-filled polyester Flammability—UL 94V-0 Contact Material— Pin—Phosphor bronze Socket—Phosphor bronze Contact Area Plating—0.76µm Gold Current Rating—6A max. Insulation Resistance— 5000 MΩ min. Dielectric Strength—1000V AC min.
PAGE 73
AMPLIMITE Subminiature D Connectors Right-Angle Mounting Connectors — Eurostyle Footprint Material and Finish: Plug with Boardlocks — Solder Termination Front Shell—Steel, tin plated Housing—Grey thermoplastic PBTP Flammability—UL 94V-0 Contact Material— Pin—Copper alloy Socket—Copper alloy Contact Area Plating—Nickel/Gold (>250 mating cycles) Current Rating—2.2A Insulation Resistance— 5000 MΩ min.
PAGE 74
AMPLIMITE Subminiature D Connectors Standard Density Press Fit Termination, Right-Angle Mounting Standard Density Press Fit Termination, Right-Angle Mounting — European Standard Footprint Material and Finish: Plug with Boardlocks — Press Fit Termination Front Shell—Steel, tin plated Housing—Black thermoplastic PBTP/PPS Flammability—UL 94V-0 Contact Material— Pin—Copper alloy Socket—Copper alloy Contact Area Plating—Nickel/Gold (>250 mating cycles) Current Rating—2.2A Insulation Resistance— 5000 MΩ min.
PAGE 75
AMPLIMITE Subminiature D Connectors Subminiature D Connectors for Cable Mounting This guide illustrates the preferred range of Subminiature D Connectors for cable mounting. Please refer to our general catalogs or our website www.te.com for details of additional ranges, connec- Plug Connector Housing Socket Connector Housing tor styles, plating options and performance levels.
PAGE 76
AMPLIMITE Subminiature D Connectors Straight Posted Connectors HD-20 Straight Posted Connectors Product Selection Guide Connector Density Post Style Type HD-20 Plugs and Receptacles Straight Style and Shell Finish No. of Contact Positions Mating Hardware Full Metal-Shell With and Without Grounding Indents, Tin Plated (pgs. 78 and 79) 9 15 25 37 50 Front Metal-Shell With and Without Grounding Indents (pgs. 80 and 81) All-Plastic (pgs.
PAGE 77
AMPLIMITE Subminiature D Connectors HD-20 Straight Posted Connectors (Continued) Product Facts ■ ■ Flame retardant thermoplastic housing material, UL 94V-0 rated ■ HD-20 straight posted connectors are available in 9, 15, 25, 37 and 50 positions (Shell Sizes 1 thru 5) HD-20 straight posted connectors in Full Metal-Shell, Front Metal-Shell and All-Plastic versions ■ HD-20 connectors with ACTION PIN contacts are available in low, medium and high profiles with integral standoffs ■ Choice of contact pl
PAGE 78
AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Straight Posted Connectors Plug ±.015 ±.010 A [±0.381] B [±0.254] .120 [3.05] Dia. Typ. ±.015 C [±0.381] Straight Posted Connectors Without Grounding Indents Mating Face .426±.010 [10.82±0.25] .230±.006 [5.84±0.15] .689±.015 [17.50±0.38] ±.030 D [±0.762] With Grounding Indents .025 [0.64] Sq. Post Typ.
PAGE 79
AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Straight Posted Connectors (Continued) Receptacle ±.015 A [±0.381] ±.010 B [±0.254] See Table ±.015 C [±0.381] Straight Posted Connectors Mating Face .429±.015 [10.90±0.38] .243 [6.17] .696±.015 [17.68±0.38] ±.030 D [±0.762] With Clinch Nuts .025 Post [0.64] Sq. Typ.
PAGE 80
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Straight Posted Connectors Plug See Table .494±.015 [12.55±0.38] ±.010 With Grounding Indents B [±0.254] ±.015 Straight Posted Connectors A [±0.381] With Threaded Insert Mating Face .236±.010 [5.99±0.25] .230±.006 [5.84±0.15] With Fixed Female Screwlock +.020 [0.508] C -.015 [0.381] .026 [0.66] Dia. Typ. See customer drawings for pcb layouts.
PAGE 81
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Straight Posted Connectors (Continued) Receptacle See Table .494±.015 [12.55±0.38] ±.010 With Standard Mounting Holes B [±0.254] ±.015 A[±0.381] Straight Posted Connectors Mating Face With Threaded Insert .243 [6.17] +.020 [0.508] C -.015 [+0.381] .236±.010 [5.99±0.25] Typ. With Fixed Female Screwlock .026 [0.66] Dia. Typ. See customer drawings for pcb layouts.
PAGE 82
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Straight Posted Connectors Plug See Table .476±.015 [12.09±0.38] C Max. ±.010 Straight Posted Connectors With Threaded Insert +.020 [-0.508] B [±0.254] With Standard Mounting Hole D A Max. .230±.006 [5.84±0.15] Typ. +.015 [0.381] .026 [0.66] Dia. Typ.
PAGE 83
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Straight Posted Connectors (Continued) Plug (Continued) Shell Size No. of Contact Positions 1 9 2 25 A B C 1.228 32.72 .984 24.99 .420 10.67 1.546 39.27 1.312 33.33 .420 10.67 2.095 53.21 1.852 47.04 .420 10.67 4 37 2.737 69.52 5 50 2.643 67.13 2.500 63.50 .420 10.67 2.406 61.11 .527 13.39 *D* Contact Finish (Plating Code) Plug Part Numbers With With Fixed With .120 [3.
PAGE 84
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Straight Posted Connectors (Continued) Receptacle See Table .479±.015 [12.17±0.38] C Max. +.020 [-0.508] ±.010 B [±0.25] With Standard Mounting Hole .026 [0.66] Dia. Typ. A Max. Straight Posted Connectors D +.015 [0.381] Mating Face With Threaded Insert .243 [6.17] With Fixed Female Screwlock See customer drawings for pcb layouts.
PAGE 85
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Straight Posted Connectors (Continued) Receptacle (Continued) Shell Size 1 2 No. of Contact Positions A B C 9 1.228 32.72 .984 24.99 .420 10.67 15 1.546 39.27 1.312 33.33 .420 10.67 25 2.095 53.21 1.852 47.04 .420 10.67 4 37 2.737 69.52 2.500 63.50 .420 10.67 2.643 67.13 2.406 61.11 .527 13.39 5 50 *D* .125 3.18 A B .170 4.32 A — — 5745076-6 .125 3.
PAGE 86
AMPLIMITE Subminiature D Connectors HD-22 Straight Subminiature D Connectors Material and Finish: Straight Posted Connectors Housing—94V-0 rated thermoplastic, black ▲ VESA Std. 15-position Receptacle Housing Material—Thermoplastic 94V-O blue per VESA Std. Shell—Steel, nickel plated Contacts Pins—Brass Sockets—Phosphor bronze Contact Plating— Gold flash, .000010 [0.00025] or .000030 [0.
PAGE 87
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Straight Posted Connectors With ACTION PIN Contacts Receptacle See Table .479 ±.015 [12.17±0.38] C Max. ±.010 B [±0.254] ±.015 A [±0.381] Straight Posted Connectors With Standard Mounting Holes .243 [6.17] With Threaded Insert .080±.010 [2.03±0.25] .228 [5.79] Max. See customer drawings for pcb layouts. With Fixed Female Screwlock Material and Finish: For .062 [1.57] min.
PAGE 88
AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Straight Posted Connectors With ACTION PIN Contacts (Continued) Plug ±.015 A [±0.381] ±.010 B [±0.254] .230±.006 [5.84±0.15] ±.015 C [±0.381] See Table Straight Posted Connectors .236±.010 [5.99±0.25] With Standard Mounting Holes Mating Face With Threaded Insert .228 [5.79] Max. Typ. With Fixed Female Screwlock See customer drawings for pcb layouts.
PAGE 89
AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Straight Posted Connectors With ACTION PIN Contacts Receptacles (Low and High Profile) A Max. .243 [6.17] ±.010 B [±0.254] ±.015 ±.015 C [±0.381] D [±0.381] See Table Straight Posted Connectors Mating Face With Standard Mounting Holes .228 [5.79] Max. With Threaded Insert See customer drawings for pcb layouts.
PAGE 90
AMPLIMITE Subminiature D Connectors Cable Connectors HDP-20 Crimp Snap-In Contact Connectors Product Selection Guide Connector Type Insert Material Contacts Shell Type Material and Finish Type Mounting Termination Duplex (.000030 [0.00076] Gold and Tin) Zinc Plated Steel Without Grounding Indents Plug (pg. 92) 94V-0 Rated Thermoplastic Black Tin Plated Steel Without Grounding Indents .120 [3.05] Dia. Holes Clinch Nut, 4-40 Threads Plating ➧ Pins (pgs.
PAGE 91
AMPLIMITE Subminiature D Connectors HDP-20 Crimp Snap-In Contact Connectors (Continued) Product Facts ■ ■ Shell sizes offer wide choice of contact positions—9, 15, 25, 37 and 50 Lower cost, commercial version of the military approved series ■ Tin or zinc plated shells, with or without grounding indents Crimp snap-in contacts allows loading of only the number of contacts being used ■ ■ ■ Intermateable with any size 20 Subminiature D connector dimensionally complying with MIL-C-24308 ■ Recognized u
PAGE 92
AMPLIMITE Subminiature D Connectors HDP-20 Crimp Snap-In Contact Connectors (Continued) Plug A B .120 [3.05] Dia. Typ. 2 Holes C Material and Finish: Grounding Indents (See Table) Cable Connectors Shell—Steel, zinc or tin plated Insert—94V-0 rated thermoplastic, black Mating Face Mounting Holes: Standard—.120 [3.05] Dia. Clinch Nut—4-40 threads with self-locking feature .230 [5.84] .420 [10.67] Ref. .432 [10.97] Max.
PAGE 93
AMPLIMITE Subminiature D Connectors HDP-20 Crimp Snap-In Contact Connectors (Continued) Receptacle A B .120 [3.05] Dia. Typ. 2 Holes C .243 [6.17] Mating Face Cable Connectors .430 Ref. [10.92] .432 [7.90] Max. Shell Size No. of Contact Positions 1 9 1.213 30.81 .984 24.99 .494 12.55 94V-0 2 15 1.541 39.14 1.312 33.33 .494 12.55 94V-0 * 3 25 2.088 53.04 1.852 47.04 .494 12.55 94V-0 4 37 2.729 69.32 2.500 63.50 .494 12.55 94V-0 5 50 2.635 66.93 2.406 61.11 .605 15.
PAGE 94
AMPLIMITE Subminiature D Connectors HDP-20 Basic Shielding Hardware Kits Plug .120 Typ. [3.05] 2 Holes .109 [2.77] Typ. .509 [12.93] Max. .112 [2.84] Typ. Grounding Indents Cable Connectors .230 [5.84] Plug Connector .195 Max. [4.95] Typ. Each kit contains: ■ Connector E ■ Inner shield ■ Outer shield Inside Shield Contacts and ferrules must be purchased separately.
PAGE 95
AMPLIMITE Subminiature D Connectors HDP-20 Basic Shielding Hardware Kits (Continued) Receptacle .120 Typ. [3.05] 2 Holes .109 Typ. [2.77] .509 [12.93] Max. .112 [2.84] Typ. Rcpt. Connector .243 [6.17] .195 Max. [4.95] Typ. Cable Connectors E Inside Shield Outside Shield D .100 Max. [2.54] Ferrule (Must Be Purchased Separately) View of Rear Shell (With Shields Removed) .462 [11.73] Max. Clinch Nut (Plug and Receptacle) Recommended Cable Outer Dia. Range Max. Inner Cable Bundle Dia.† 1.535 38.
PAGE 96
AMPLIMITE Subminiature D Connectors HDP-20 Shielding Hardware Enclosure Kits Plug Ferrule (Must Be Purchased Separately, As Required By Cable Diameter Expanding Neck Accommodates Cable .125 [3.18] Max. F Max Cable Ref. Each Kit Contains: Jackscrew Qty. 2 Cable Connectors ■ Connector ■ Inner shield ■ Outer shield ■ Enclosure ■ Two jackscrews Contacts and ferrules must be purchased separately. Material and Finish: D Max. Shield Qty. 2 .812 [20.62] Typ. 1.467 [37.26] Typ.
PAGE 97
AMPLIMITE Subminiature D Connectors HDP-20 Shielding Hardware Enclosure Kits (Continued) Receptacle Expanding Neck Ferrule (Must Be Purchased Separately, As Required By Cable Diameter F Max .125 [3.18] Typ. Cable Ref. Cable Connectors Jackscrew Qty. 2 D Max. Shield Qty. 2 .812 [20.62] Typ. 1.467 [37.26] Typ. Enclosure E Max. Rcpt. Connector HDP-20 Shell Size No. of Contact Positions 1 9 2 15 3 25 4 37 5 50 Dimensions D E F 1.660 42.16 1.660 42.16 1.660 42.16 2.010 51.05 2.010 51.
PAGE 98
AMPLIMITE Subminiature D Connectors Shielded Connector, Preassembled Kit Cable Connectors Designed to meet the requirements of Local Area Networking, this Subminiature D Shielded Connector Kit is available with slide latches attached to the receptacle. The receptacle is shielded and covered with a durable plastic enclosure. This shielding decreases emissions and provides an effective EMI/RFI barrier.
PAGE 99
AMPLIMITE Subminiature D Connectors HDP-20 Ferrules for Shielding Hardware Kits Ferrules for Shielding Hardware Kits .020 [0.
PAGE 100
AMPLIMITE Subminiature D Connectors HDP-20 Connector Contacts, Precision Formed Contact Size 20 DF Pin Diameter .040 [1.02] Crimp Snap-In Contacts Material and Finish: With Insulation Support Cable Connectors Pin—Brass Socket—Phosphor bronze Plated A—Select—Gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on mating end B—Duplex—.000030 [0.
PAGE 101
AMPLIMITE Subminiature D Connectors HDP-20 Connector Contacts, Precision Formed (Continued) Contact Size 20 DF Pin Diameter .040 [1.02] .025 [0.64] Square Posted Contacts Stabilizer Stabilizer Material and Finish: Pin—Brass Socket—Phosphor bronze Plated: A—Duplex plated .000030 [0.00076] gold on mating end, with entire contact .000050 [0.00127] min. nickel underplated B—Duplex plated gold flash on mating end, with entire contact .000050 [0.00127] min.
PAGE 102
AMPLIMITE Subminiature D Connectors HDP-20 Application Tooling Cable Connectors HDP-20 contacts may be applied by a variety of hand tools and machines. For low production runs, repairs and prototype work, we offer either our premium CERTI-CRIMP Hand Tool or our commercial PRO-CRIMPER II Hand Tool. For medium-volume production, you have the choice of our AMP-O-LECTRIC Model “G” Terminating Machine, our new Model “M” Terminating Machine, or our AMP-O-MATIC Model II Stripper-Crimper Machine.
PAGE 103
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors Cable Connectors Product Selection Guide Type Plug (pg. 105) Connector Shell Type Insert Material and Material Finish 94V-0 Rated Thermoplastic, Black Tin Plated Steel with Grounding Indents Contacts Mounting .120 [3.05] Dia. Holes Type ➧ Pin (pg. 109) Termination Plating Duplex (.000030 [0.00076] Gold and Tin) Crimp Duplex (Gold Flash and Tin) ➧ Receptacle (pg.
PAGE 104
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Product Facts: ■ ■ ■ Approximately 65% higher density than HD-20 connectors Lower cost, commercial version of the military approved Series 90 family Available with shielding overmold hardware and shielding enclosure kits Capable of using numerous standard HD-20 cable clamps and mating hardware Cable Connectors ■ ■ ■ ■ Low cost, high performance, precisionformed crimp contacts Intermateable with any size 22 Subm
PAGE 105
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Plug A B .120 [3.05] Dia. 2 Holes C Plug (With Grounding Indents) Grounding Indents (See Table) Mating Face .230 [5.84] Cable Connectors .420 [10.67] Ref. Receptacle .432 [10.97] Max. .100 [2.54] Max. Receptacle Clinch Nut (Plug and Receptacle) A B Material and Finish: Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts and ferrules must be purchased separately. .120 [3.05] Dia.
PAGE 106
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Basic Shielding Hardware Kits Plug .120 [3.05] Dia. 2 Holes Plug Connector .195 [4.95] Max. Typ. .230 [5.84] Typ. Plug Cable Connectors C Ferrule (Must Be Purchased Separately) D Receptacle Receptacle .120 [3.05] Dia. 2 Plc. Each kit contains: ■ Connector ■ Inner shield Rcpt. Connector ■ Outer shield Contacts and ferrules must be purchased separately. .195 [4.95] Max. Typ.
PAGE 107
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Shielding Hardware Enclosure Kits Expanding Neck, Accommodates Cable Plug E Max. D Max. Ferrule (Must Be Purchased Separately, As Required By Cable Diameter Cable Ref. .125 Max. [3.18] 4-40 Jackscrew Qty. 2 C Max. 1.467 [37.62] Typ. Shield Qty. 2 .812 [20.62] Typ.
PAGE 108
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Ferrules for Shielding Hardware Kits .020 [0.51] Stepped Cable Connectors L Shell Sizes Style 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Straight 1-3 Straight Instruction Sheets— 408-9507 408-9508 408-9243 408-9242 4-5 Stepped 4-5 Stepped 4-5 Stepped Note: Instruction Sheets for TE Tooling are packaged with the tooling.
PAGE 109
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Material Precision Formed Crimp Snap-In Contacts, Size 22 DF Pin—Brass Socket—Phosphor bronze Finish A—Duplex plated .000030 [0.
PAGE 110
AMPLIMITE Subminiature D Connectors Cable Connectors HDE-20 IDC Connectors for Discrete Wire and Jacketed Cable Product Selection Guide Contacts Pre-Loaded* Connector Type Insert Material Shell Type Material and Finish Mounting Type Termination Plating Plug All-Plastic (pg. 112) Metal-Shell (pg. 114) 94V-0 Rated Thermoplastic, Black Tin Plated Steel .120 [3.05] Dia. Holes ➧ Pins Insulation Displacement * Interchangeable crimp snap-in contacts available, see page 121 Duplex (.000030 [0.
PAGE 111
AMPLIMITE Subminiature D Connectors HDE-20 IDC Connectors for Discrete Wire and Jacketed Cable (Continued) Product Facts ■ Insulation displacement contacts preloaded in housings ■ No wire stripping Post plated contacts with no bare edges ■ ■ ■ Removable contacts for replacement and repair Selective loading of contacts available ■ Crimp snap-in contacts available for making jumpers between circuits ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No.
PAGE 112
AMPLIMITE Subminiature D Connectors HDE-20 All-Plastic IDC Connectors Plug .109 [2.77] Ref. Molded Cavity Indentification & AMP Trademark .112 [2.85] Typ. .120 [3.05] Dia. 2 Holes .509 Max. [12.93] B A Plug .230 [5.84] Material and Finish: Cable Connectors Housing—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
PAGE 113
AMPLIMITE Subminiature D Connectors HDE-20 All-Plastic IDC Connectors (Continued) Receptacle Molded Cavity Indentification & AMP Trademark .109 [2.77] Ref. .112 [2.85] Typ. .120 [3.05] Dia. 2 Holes .509 Max. [12.93] B A Receptacle .243 [6.17] Material and Finish: Cable Connectors Housing—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
PAGE 114
AMPLIMITE Subminiature D Connectors HDE-20 Metal-Shell IDC Connectors Plug .109 [2.77] Ref. .120 [3.05] Dia. 2 Holes .112 Typ. [.285] .509 [12.93] B Cable Connectors A .230 [5.84] Material and Finish: Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
PAGE 115
AMPLIMITE Subminiature D Connectors HDE-20 Metal-Shell IDC Connectors (Continued) Receptacle .109 [2.77] Ref. .120 [3.05] Dia. 2 Holes .112 Typ. [.285] .509 [12.93] B A Material and Finish: Cable Connectors .243 Typ. [6.17] Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
PAGE 116
AMPLIMITE Subminiature D Connectors HDE-20 Basic Shielding Hardware Kits Plug .120 Dia. [3.05] 2 Holes .109 [2.77] Typ. .509 Max. [12.93] .112 [2.84] Typ. Plug Connector .230 [5.84] Typ. .086 [2.18] Max.Typ. Each kit contains: ■ Connector Cable Connectors ■ Inner shield .377±.015 [9.58±0.38] ■ Outer shield Ferrules must be purchased separately.
PAGE 117
AMPLIMITE Subminiature D Connectors HDE-20 Basic Shielding Hardware Kits (Continued) Receptacle .120 [3.05] Dia. 2 Holes .109 [2.77] Typ. .509 Max. [12.93] Rcpt. Connector .243 [6.17] Typ. .112 [2.84] Typ. .086 [2.18] Max.Typ. Each kit contains: ■ Connector Cable Connectors ■ Inner shield .377 [9.58] ■ Outer shield Ferrules must be purchased separately.
PAGE 118
AMPLIMITE Subminiature D Connectors HDE-20 Shielding Hardware Enclosure Kits Plug Expanding Neck Accommodates Cable Ferrule (Must be Purchased Separately as Required by Cable Dia.) .630 [16.00] Max. Cable Connectors Each kit contains: ■ Connector ■ Inner shield ■ Outer shield ■ Enclosure ■ Two jackscrews Ferrules must be purchased separately. 1.640 Max. [41.
PAGE 119
AMPLIMITE Subminiature D Connectors HDE-20 Shielding Hardware Enclosure Kits (Continued) Receptacle Expanding Neck Accommodates Cable .630 [16.00] Max. Ferrule (Must be Purchased Separately as Required by Cable Dia.) Each kit contains: ■ Connector ■ Inner shield ■ Outer shield ■ Enclosure ■ Two jackscrews Ferrules must be purchased separately. Cable Ref. 1.640 Max. [41.
PAGE 120
AMPLIMITE Subminiature D Connectors HDE-20 Crimp Snap-In Contact Connectors Ferrules for Shielding Hardware Kits .020 [0.
PAGE 121
AMPLIMITE Subminiature D Connectors HDE-20 Contacts, Precision Formed Material and Finish: Phosphor bronze, duplex plated as follows: A—Duplex plated .000030 [0.
PAGE 122
AMPLIMITE Subminiature D Connectors HDE-20 Application Tooling Hand Tools with Modular Heads Technical Documents: Air Pistol Grip Tool Manual Pistol Grip Tool Cable Connectors Instruction Sheets— 408-6790 408-9414 408-6789 Note: Instruction Sheets for TE Tooling are packaged with the tooling. For additional information call the Tooling Assistance Hotline: 1-800-722-1111. A modular interchangeable head provides versatility to these tools.
PAGE 123
AMPLIMITE Subminiature D Connectors HDE-20 Application Tooling (Continued) Product Facts CHAMPOMATOR 3A Terminating Machine Low applied costs ■ Automatic termination of jacketed cable ■ Automatic continuity check and shorts test ■ Single- or double-ended assemblies ■ Microprocessor controlled with touch input screen ■ Stored program capability ■ Selective termination of connector positions ■ Rapid tooling changeover for different connector types ■ Handles a variety of TE insulation-displa
PAGE 124
AMPLIMITE Subminiature D Connectors Subminiature D Connectors HDF-20 for Flat Ribbon Cable Cable Connectors Product Facts Plug — Low Profile Metal Shell ■ Available in all 5 standard shell sizes ■ Visual inspection of termination possible ■ Fluted cover provides positive alignment of cable prior to termination ■ Wide range of application tooling ■ Patented insulation displacement contact latches into the connector cover ■ Contact design provides a “gas-tight” termination ■ Contacts accept
PAGE 125
AMPLIMITE Subminiature D Connectors HDF-20 Low Profile All-Plastic Connectors (for Round Conductor Flat Ribbon Cable) Material and Finish Plug Assemblies Receptacle Assemblies Housing, Cover & Cable Stabilizer—Black thermoplastic, 94V-0 rated Threaded Inserts—Brass, unplated Pin Contacts—Phosphor bronze, duplex plated .000030 [0.00076] gold on mating end, .000100-.000200 [0.00254-0.00508] bright tin on termination end, with entire contact underplated .000050 [0.
PAGE 126
AMPLIMITE Subminiature D Connectors HDF-20 Plugs/Receptacles Mating and Panel Mounting Specifications Plug/Receptacle Mating Panel Cutouts .265±.015 Shell Sizes 1 & 2 [6.73±0.38] .256±.015 Shell Sizes 3, 4 & 5 [6.50±0.38] A 10° ± 2° (2 Places) C D J* E F Cable Connectors Plug Receptacle .120± .002 [3.05± 0.05 ] (2 Places) K Radius (4 Places) H* B CL The .265/.256 [6.73/6.50] dimensions are required to assure full mating of connector halves.
PAGE 127
AMPLIMITE Subminiature D Connectors HDF-20 Application Tooling Application Tooling Cable Connectors Hand Tool Kit No. 768340-1 Consists of a hand tool frame, a universal base assembly, a bench mount kit, and connector-specific tooling for AMP-LATCH Standard and Novo Receptacles, Card-Edge Connectors, and AMPLIMITE HDF-20 Connectors. Note: For 50-position HDF connectors, you must also order ConnectorSpecific Kit No. 768350-1. Note: All part numbers are RoHS compliant.
PAGE 128
AMPLIMITE Subminiature D Connectors HD-20 Solder Cup Connectors Cable Connectors Product Facts ■ Preloaded duplex-plated solder cup contacts ■ Shell finish in choice of standard zinc or tin ■ Two-piece 94V-0 rated plastic insert ■ Anti-solderwicking contact design ■ Intermateable with other subminiature D connectors ■ Available in 9, 15, 25 and 37 position (shell sizes 1-4) plugs and receptacles ■ Easy application without special application tools ■ Shields offer full EMI shielding and ESD
PAGE 129
AMPLIMITE Subminiature D Connectors HD-20 Solder Cup Connectors (Continued) Plug A B .493 [12.50] Ø .122 [3.10] Clinch Nut #4-40 UNC x 3.0 2 Plcs. Material and Finish: Shell—Steel, tin or zinc plated Insert—94V-0 rated thermoplastic, black Contacts—Phosphor bronze; duplex plated with gold flash on mating end, tin on solder cup, with entire contact nickel underplated Grounding Indent .607 ± .015 [15.40 ± 0.38] .047 [1.20] Cable Connectors .426 [10.
PAGE 130
AMPLIMITE Subminiature D Connectors HD-20 Solder Cup Shielding Hardware Enclosure Kits Plug and Receptacles C .886 [22.
PAGE 131
AMPLIMITE Subminiature D Connectors Accessories Numerous accessories are available for strain relief and cable clamping, shielding, connector-to-connector mating, connector-toconnector pc board mounting, and keying. These accessories are illustrated and tabled on the following pages. Cable Connectors To help discern the accessories available for a particular connector type, refer to the Product Selection Guide at the beginning of the connector section.
PAGE 132
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps Material and Finish: Universal Cable Clamps for Jacketed Cable Cable Clamp Housing— Thermoplastic, black Cable Clamp Wedge Set— Thermoplastic, black 4-40 Mounting Screws— Steel, zinc plated Related Product Data: 2.090 [53.09] 2.105 [53.47] HDE or HDP Plug or receptacle (Shown for Ref.
PAGE 133
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) The TE Quik-Snap Backshell Kit is a one-piece, all-plastic cable clamp kit designed for use with either the AMPLIMITE HDP-20, HDP-22, or HDE, all-plastic or metal-shell connectors. One-Piece, All-Plastic Cable Clamp for Jacketed Cable, 180°/120° Exit (HDP and HDE) (Quik-Snap) .700±.010 [17.78±0.25] Cable Gate Kits are available for connector sizes 1, 2, 3, and 4 with a cable exit option of 180° or 120°. Cable Exit A 1.928 [48.
PAGE 134
AMPLIMITE Subminiature D Connectors Unshielded Cable Connector and Clamp Kits The AMPLIMITE Quik-Snap Backshell and Connector kit presents a complete package for your unshielded subminiature D connector needs. Kits are available for Shell Sizes 1, 2 and 3, and are packaged 25 and 100 kits per unit. One-Piece, All-Plastic Cable Clamp for Jacketed Cable, 180°/120° Exit and HDP-20 and HDE-20 Connector Retainer Clip 2.079 [52.81] Max.
PAGE 135
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps Straight Exit Low Profile for Jacketed Cable F Cover Cable Support Gate (See Note 3.) Cable Support Gate A M Cover B Cable Connectors Low Profile Cable Clamps feature a two-piece construction which allows the two cover halves to be snapped together, no hardware is required for assembly. They can be used on plugs or receptacles and will not interfere with commonly used mating hardware.
PAGE 136
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Material Slide-On Back Covers Black thermoplastic HDE Plug or Receptacle Related Product Data: Cable Connectors Connectors used with: HDE All-Plastic—pages 112 & 113 HDE Metal-Shell—pages 114 & 115 Other accessory capabilities: RFI/EMI Metal Shields— pages 141 & 142 Male Screw Retainers— pages 146 & 147 Locking Posts and Slide Latches— pages 149-151 Latching Blocks—pages 153 & 154 Cover Halves Latch Here and on Opposite Side Cov
PAGE 137
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Box and Lid Straight/90° Exit A Max. 1.70 [43.18] B Max. B Max.
PAGE 138
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Cable Connectors Straight/45° Exit Cable Clamps can be used on either a plug or receptacle and will not interfere with commonly used hardware, such as Male Screw Retainers, Female Screw-locks or Spring Latches and Latching Blocks. Their hinged construction allows easy assembly to a harness.
PAGE 139
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Material and Finish: Straight Exit Dataphone Cable Clamp Housing— Nylon, black 4-40 Fillister Head Screws & Hex Nuts—Steel, clear zinc plated Jackscrews—Steel, black zinc plated A Max. B Metal-Shell HDP-20 Plug or Receptacle (Shown for Ref. only) Related Product Data: Connectors used with: HDP Metal-Shell—pages 90-102 .770 [19.56] Shell Size 2 3 Dimensions B A 1.575 40.01 2.115 53.72 Max. Cable Dia. (without Gate) 1.
PAGE 140
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Cable Connectors Straight/90° Exit Cable Clamps can be used on a plug or receptacle and will not interfere with commonly used mating hardware. Their three-piece construction allows easy assembly to a cable harness. Also, the same cable clamp components are used for both straight and 90° cable exit applications. This is accomplished by simply positioning the Male and Female Panels on the Yoke for the desired angle.
PAGE 141
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps Straight Exit RFI/EMI Shields for Jacketed Cable (Two-Piece) 1.920 [48.77] C 4-40 Male Jackscrew Kit Nos.: 747784-8 (bulk packed)*† HDE or HDP Plug or Receptacle (Shown for Ref. only) Shell Size 1 A *Each part is individually bulk packed for multiple kit orders. †Slotted for screwdriver use. D Dimensions B C 1.910 48.51 1.215 30.86 Cable O.D. (Max.) D .200 5.08 .250 6.35 .370 9.40 .225 5.72 .300 7.62 .375 9.53 .430 10.92 .280 7.11 .
PAGE 142
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Cable Connectors Both the straight exit and the 90° exit die cast RFI/EMI shield allows cable to be fully prepared and terminated to the connector before the shield is installed. During installation, the shield of the jacketed cable is folded back and compressed into the cable opening of the RFI/EMI shield. For greater cable support and/or shielding effectiveness, splitring and crimp ferrules are available (pages 143-145).
PAGE 143
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Material and Finish: Outer Ferrule—Copper, plated .000100 [0.00254] min. tin Inner Ferrule—.023 [0.58] thick brass, plated .000050 [0.00127] tin over copper Crimp Ferrules for Braided Cable Shield (See pages 144 & 145 for Inner and Outer Ferrule Part Numbers.
PAGE 144
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Crimp and Split-Ring Ferrules Shell Size Cable Dia. (Max.) Cable Connectors 1 2 3 .200 5.08 .240 6.10 .250 6.35 .280 7.11 .370 9.40 .225 5.72 .240 6.10 When using these Shield Kits 90° Exit Die Cast Straight Exit Shield Kit No. Shield Kit No. Without With Metal-Plated Die Cast Slide Slide Plastic Latch Latch Split-Ring* Ferrule No. Inner Crimp Ferrule No. and Tooling No.
PAGE 145
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Crimp and Split-Ring Ferrules (Continued) Shell Size 5 .240 6.10 .280 7.11 .350 8.90 .350 8.90 .430 10.92 .500 12.70 .525 13.34 .575 14.61 .650 16.51 .240 6.10 .365 9.27 .375 9.53 .430 10.92 .450 11.43 .525 13.34 .530 13.46 .600 15.24 .650 16.51 .675 17.15 .750 19.05 When using these Shield Kits 90° Exit Die Cast Shield Kit No. Straight Exit Shield Kit No.
PAGE 146
AMPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) HDF-20 Metal-Shell or All-Plastic Plug (Shown for Ref. only) .037 [0.94] Dia. Max. .112 [2.84] Material and Finish: Brass, .004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) .108 [2.74] Related Product Data: .212 [5.38] Max. Notes: 1. Use punching tool to remove undesired pin commoning locations on commoning strip. Use mating receptacle to seat strip over pins in plug.
PAGE 147
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material and Finish: Male Screw—Steel, zinc plated yellow chromate Retaining Clip—.012 [0.51] stainless steel Male Screw Retainers for All-Plastic Connectors (HDE) Related Product Data: 4-40 Male Screw Connectors used with: HDE All-Plastic—pages 112 & 113 .220 [5.59] Technical Documents: Instruction Sheet—408-7837 Cable Connectors All-Plastic Plug or Receptacle (Shown for Ref. only) .280 [7.11] .250 Retaining Clip [6.
PAGE 148
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material and Finish: All Parts—Cold rolled steel, zinc plated clear or yellow chromate .188† [4.78] Female Screwlocks for Metal-Shell and All-Plastic Connectors (HDE, HDF, HDP) C Style (B).
PAGE 149
AMPLIMITE Subminiature D Connectors Hardware (Continued) Slide Latches Style I Material and Finish: 4-40 Screws, Washers and Hex Nuts—Steel, zinc plated yellow chromate 2-56 Screws, Washers and Hex Nuts—Steel, zinc plated clear chromate Slide Latch—Stainless steel .135 [3.43] Metal-Shell or All-Plastic Plug or Receptacle (Shown for Ref. only) Slide Latch (See Note 3.) 4-40 Screw (2 Supplied) .165 [4.19] C A B Max.
PAGE 150
AMPLIMITE Subminiature D Connectors Hardware (Continued) Slide Latches Slide Latch Style III (for Shell Sizes 2, 3 or 5) 4-40 Locking Post Cable Connectors Slide Latch Style II (for Shell Sizes 2, 3 or 5) 2-56 Locking Post Typical Applications of Locking Posts and Slide Latches Typical Applications of Locking Posts and Slide Latches Shell Size Style 1 I II 2 III II 3 III 4 I 5 III A 1.397 35.48 1.725 43.82 1.725 43.82 1.725 43.82 1.725 43.82 1.725 43.82 1.725 43.82 2.265 57.53 2.265 57.53 2.
PAGE 151
AMPLIMITE Subminiature D Connectors Hardware (Continued) Slide Latch Clip Assembly for Unfiltered Mating Half Plug or Receptacle (See Note 2.) L Screw Clip Material and Finish: Style 1 Screw, Washers and Hex Nut—Cold rolled steel, zinc plated clear chromate Clip—Stainless steel .165 [4.19] Style 2 Technical Documents: Instruction Sheet—408-7785 Rolled Edge Lock Washer Hex Nut Kit Part Numbers: Thread Size Screw Length L 4-40 .415 10.54 2-56 .547 13.89 Part No. Screw Style Pkg.
PAGE 152
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material .015 [0.38] Stainless steel Related Product Data: Connectors used with: HDE Metal-Shell—pages 114 & 115 HDP Metal-Shell (Tin plated only)— pages 90-102 Spring Latches for Cable Clamps with Mounting Ears (Two-Piece) Spring Latch Straight Exit RFI/EMI Shield (Shown for Ref. only. See Note 1.) Metal-Shell Plug or Receptacle (Shown for Ref. only) Technical Documents: Instruction Sheet—408-9130 .230 [5.84] Cable Connectors Spring Latch .
PAGE 153
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material and Finish: Latching Blocks—Zinc Pan Head Screws—Steel, zinc plated Latching Blocks with Threaded Hole Metal-Shell or All-Plastic Plug or Receptacle (Shown for Ref.
PAGE 154
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material Latching Blocks with Slot Recess and Thru Hole Latching Blocks—Zinc Metal-Shell or All-Plastic Plug or Receptacle (Shown for Ref. only, See Note 2.) Related Product Data: Cable Connectors Connectors used with: HDE Metal-Shell or All-Plastic— pages 112-115 HDF Metal-Shell or All-Plastic— pages 125 & 126 HDP Metal-Shell—pages 90-102 HD Board Mount—pages 54-71, 78-85, 87-89 Mating/Panel Mounting—page 136 .120 [3.05] Dia.
PAGE 155
AMPLIMITE Subminiature D Connectors Hardware (Continued) Standoff Bushings 4-40 Screws (Customer Supplied) Material: Metal-Shell Plug or Receptacle (Shown for Ref. only) Aluminum Related Product Data: Standoff Bushing Connectors used with: HD Straight Posted— pages 76-85, 87-89 .250 [6.35] 4-40 Threads (thru) Cable Connectors .435 [11.
PAGE 156
AMPLIMITE Subminiature D Connectors Part Number Index Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No.
PAGE 157
AMPLIMITE Subminiature D Connectors Part Number Index (Continued) Page 74 130 130 130 130 130 130 130 130 100 100 100 100 100 100 100 100 124 124 124 125 124 125 124 124 125 125 93 93 93 93 93 95 95 95 95 95 95 95 95 95 97 97 97 97 97 97 97 97 95 109 105 105 105 105 106 106 106 107 107 107 105 Part No.
PAGE 158
AMPLIMITE Subminiature D Connectors Part Number Index (Continued) Part Number Index Part No.
PAGE 159
AMPLIMITE Subminiature D Connectors Tooling Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. 54334 58024 58063 58074 58075 58241 58273 58274 58338 58430 58448 58449 Part No.
PAGE 160
TE Connectivity Catalog 82068 Revised 4-12 © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 82068 LUG PDF 04/2012 TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. AMPLIMITE Subminiature D Connectors te.