Information

93
Catalog 82004 Dimensions are shown for Dimensions are in inches and Canada: [phone] UK: [phone]
Revised 3-11 reference purposes only. millimeters unless otherwise Mexico/C. Am.: [phone] France: [phone]
Specifications subject specified. Latin/S. Am.: [phone] Netherlands: [phone]
www.te.com to change. USA: [phone] Germany: [phone] China: [phone]
FASTON Terminals (Insulated and Uninsulated)
Ultra-Fast Plus Fully Insulated FASTON Receptacles and Tabs
Ultra-Fast Plus Fully Insulated FASTON Receptacles and Tabs
Product Facts
■ One-piece fully insulated
premier line FASTON
receptacle with insulation
crimp helps prevent shock
and short hazards
■ Designed for correct lead-in
of tab
■ Designed for full mating
with a variety of tab styles
including those with
shoulders
■ Funnel wire entry
■ Wire stop
■ Visual inspection of crimp
and wire brush
■ Assemblies are color-coded
by wire size
■ Assemblies contain wire
size and tab size designation
■ Mating tab thickness marked
on terminal and visible
through housing (110 and
187 series)
■ Application tooling available
to meet production
requirements
■ Tin plated copper alloy
terminals
■ UL rated at +105°C
■ Terminates 22-14 AWG
solid, fused and stranded
wire
■ Complies with the IEC
380, 601, 950, and UL
1950 requirements for a
secondary means of
insulation fixing
Performance Capabilities
■ Meets UL-310 specification
for quick connect terminals;
UL listed under File
No. E-66717
■ Meets CSA C22.2, No.153
specification for quick
connect terminals;
CSA certified under
File No. LR 7189
■ 600-volt application
capability (1,000 volts for
signs and fixtures)
Ultra-Fast Plus fully
insulated FASTON
receptacles and tabs offer
all the advantages of the
standard Ultra-Fast product
plus an insulation crimp.
Ultra-Fast Plus fully
insulated FASTON
receptacles and tabs
preclude the need for costly
electrical safety interlocks
or special protective shields
to help prevent shock
hazards. In addition,
electrical short circuits
from exposed leads are
eliminated, even in
equipment requiring close
contact spacing.
Ultra-Fast Plus
FASTON
receptacles and tabs are
preinsulated assemblies
featuring a co-molded
housing produced from two
different nylon materials.
The receptacle/ tab and
wire barrel portions of the
housing are molded from
type 6/6 nylon material with
a +130°C UL temperature
rating. The insulation barrel
is molded from a premium
grade nylon selected to
retain the insulation crimp
shape. This premium
nylon exhibits minimal
springback, thus providing
actual insulation crimp
tensile strength as well as
strain relief for applications
where extreme wire
dressing and/or vibration
are present.
The Ultra-Fast Plus
FASTON
receptacle housing
completely encloses a tin
plated copper alloy premier
FASTON receptacle which
has been stress relieved for
increased durability and
resistance to operator
abuse. The FASTON
receptacle is recessed
sufficiently within the
housing to allow its use in
600-volt applications. The
receptacle portion of the
terminal is designed for
positive mating with a
variety of tabs, including
those with shoulders. The
housing has a slotted
membrane which is
displaced by two tab
shoulders allowing proper
■ Tested by TUV File No.
E9071003 as suitable for end
product certification to the
following standards:
EN 60 950/09.87
DIN IEC 380/VDE 0806/08.81
DIN IEC 601-1 Part 1/VDE 0750
T1/05.82
DIN VDE 0700 T1/02.81
engagement of tab and
receptacle while
maintaining the fully
insulated characteristics.
Positive entry and lead-in of
the tab is provided by the
inner housing wall and the
lead-in on the terminal
rolls. This permits positive
engagement, even in blind
mating locations.
The Ultra-Fast Plus
FASTON
tab housing completely
encloses a tin plated
copper alloy FASTON tab.
The FASTON tab is
recessed sufficiently within
the housing to allow its use
in 600-volt applications.
The housing is designed to
completely encapsulate the
tab and receptacle when
the two are mated.
Quality control is easily
maintained. The nylon
housing is translucent,
allowing visual inspection of
the termination.
Depending on
production requirements,
TE provides a complete
selection of terminating
equipment from hand tools
to automatic lead makers.
Insulation Crimp Cross Section
R
R