Information

72
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-3000 Series (Continued)
AMP Dynamic Series Connectors
D-3000 Series
D-3400F — Skyscraper
Connectors (Continued)
Board-mounting Tab Header (Horizontal Type)
PC Board Layout
Acceptable Board Thickness:
1.6-2.4±0.1
Tube Package Dimensions
For 12 Pos.
For 20 Pos.
No. of
Pos.
12
16
20
Part Number
Dimensions
AB
15.02 7.62
——
22.64 15.24
178216-❏
—
917251-❏
Mating Receptacle Housing
Part Number
178214-1
—
917249-1
Testing Advice
(Recommended methods of continuity check)
➀
Utilize tab contacts.
➁
Extract contacts from Board-
mounting Vertical Type connector
and insert them for testing.
There are two major causes for
faulty contact of the connector.
They are:
➂
The best method is to use
Board-mounting Vertical
type connector.
(1) Scooping of contacts at mating/unmating
• With this Dynamic Series, each connector is designed to protect contacts against
scooping very effectively.
(2) Widening of contact gap by forcing tester bar, etc., into receptacle contacts when
making continuity check.
• Test bars that are commercially available (2 mm) cannot be pushed in from the entry
port of housing. Never do continuity check by inserting clips, etc. Failure may also be
caused by mis-insertion of the extraction tool. Be careful when you use the tool.