Information

114- 13045
Rev F 5 of 10
Figure 3
No Burrs
Cutoff Tab
0.25 [.010]
Max.
0.25 [.010]
Max Wire
Barrel Flash
Section X--X
Wire Barrel
Crimp Width
Wire Barrel
Crimp Height
Flush to 0.6 [.020]
Crimp Location
Wire Insulation and
Conductors Must
Both Be Visible In
This Area
No Insulation
in Seam
Front Bellmouth 0.0--0.25 [.000--.010]
Rear Bellmouth
0.13--0.76
[.005--.030]D
X
X
Wire Barrel Closed at Seam with
No Strands Protruding or Showing
No Corrugated Indentations
Permitted on the Insulation
in This Area 8.89 [.350] Min
Wire Strands Must Not Exceed
Beyond the Height of the Wire Barrel
DNOTE: Rear Bellmouth Dimension for 20--18 AWG Contacts with 2.032 mm [.080 in.] Crimp Width is 0.13--0.51 [.005--.020 in.]
K. Twist and Roll
There shall be no twist, roll, deformation or other damage to the mating portion of the crimped contact that
will impair usage of the contact. See Figure 4.
Figure 4
Wire Barrel
Front of Contact
No Twist Permitted