Information

Product Specification 108-5262
Rev. C6 4 of 14
2.3.7 Connector:
A connector is an assembly of housing and crimped wire contacts with rubber plugs loaded in all
contact positions, and further equipped with double lock plate. In this product line, cap housing
assembled with tab contact and plug housing assembled with both receptacle contact and seal
ring are available.
3. Requirements:
3.1 Design and Construction:
Product shall be of the design, construction and physical dimensions specified on the applicable
product drawing.
3.2 Materials:
A. Contact: Pretinned brass or plain brass with selective gold plating over nickel
underplate, conforming to Copper Alloy 260 of ASTM B 36, or pretinned
phosphor bronze or plain phosphor bronze with selective gold plating over
nickel underplate.
B. Housing and Double Lock Plate: Molded Polybuthlene-terephthalate (PBT) conforming to
UL 94 V-2
C. Accessories and Hardware:
Rubber Plug: Nitrile Butadiene Rubber or Silicon
Cavity Plug: Nitrile Butadiene Rubber
Seal Ring: Nitrile Butadiene Rubber or Silicon
3.3 Ratings:
A. Temperature Rating: －30℃ to + 105℃ (Ambient Temperature + Temperature Rise due to
energized current)
3.3.1 Applicable Wires:
Part Number
Contact Rubber Plug
Applicable Wire
Conductor Size
(mm
2
)
Insulation
Diameter
(mm)
171630
171631
172746
178210
AV and AVS 0.2,
0.3, 0.5 one wire
1.4～2.4
171661
171662
172888
176886
AV and AVS
(Note 1) 0.5, 0.85,
1.25 one wire
2～2.6
Note 1：1.25mm
2
wire is applied to AVS only.
2：AVS stands for thin wire for automobile.