Information

108-40005
3.2. Material
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
3.3. Ratings
! Voltage: 250 volts AC
! Current: Fully loaded and energized connectors, see Figure 4
• 18 AW G: 3.1 am peres
• 22 AW G: 2.0 am peres
• 28 AW G: 1.2 am peres
! Tem perature: -55 to 105°C
3.4. Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests are perform ed at am bient tem perature.
3.5. Test Requirem ents and Procedures Sum mary
Test Description Requirem ent Procedure
Exam ination of product. Meets requirem ents of product
drawing and Application
Specification 114-40030.
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
Final exam ination of product. Meets visual requirem ents. EIA-364-18.
Visual inspection.
ELECTRICAL
Low level contact resistance. 15 milliohm s m axim um . EIA-364-23.
Subject specim ens to 100
milliam peres maxim um and 20
millivolts m axim um open circuit
voltage.
See Figure 3.
Contact resistance, specified
current.
W ire Test Resistance
Size Current Maxim um
(AW G) (amperes) (m illiohm s)
18 3.1 15
20 2.4 15
22 2.0 15
24 1.6 15
26 1.3 15
28 1.2 15
EIA-364-6.
Measure potential drop of m ated
contacts assem bled in housing.
Calculate resistance.
See Figure 3.
Insulation resistance. 5000 megohm s m inim um initial.
500 megohm s m inim um final.
EIA-364-21.
Test between adjacent contacts of
unmated specim ens.
W ithstanding voltage. One minute hold with no breakdown
or flashover. 0.5 m illiam pere
maxim um leakage current.
EIA-364-20, Condition I.
1000 volts AC at sea level.
Test between adjacent contacts of
unmated specim ens.
Figure 1 (continued)
Rev F 2 of 10