Information

114- 40030
Rev D 7 of 13
F. Universal Cable Clamp Kits
Universal Cable Clamp Kits (Instruction Sheet 408--9238) are available for connectors with a number 3
shell size (25 position) only. Each kit consists of two cable clamp halves, a two--piece braid termination
clamp set (shielded versions only), a cable clamp wedge set, and mounting screws. Release Tool Kit
91266--2 (Instruction Sheet 408--6906) is used to release assembled universal cable clamp halves.
G. One Piece Economy Shielding Hardware
AMPLIMITE One--Piece Economy Shielding Hardware is available for AMPLIMITE Size 1, 2, and 3
connectors. These press--on hardware shields must be seated with Seating Fixture 543615--1 (Instruction
Sheet 408--4245). The shielding hardware is copper with tin overplating and is available in straight 90_ exit
versions only.
Figure 5 (cont’d)
Connector
Shell
Outer Shield
Half
Ferrule (Ref)
Inner
Shield
Half
Contacts (Ref)
Thermoplastic
Enclosure
Ferrule (Ref) and Shield
Halves Hidden From View
Jackscrew (2)
Shielding
Hardware Kit
One Piece Economy
Shielding Hardware
(Size 1)
One Piece Economy
Shielding Hardware
(Size 2)
One Piece Economy
Shielding Hardware
(Size 3)
Shielding Hardware
Enclosure Kit
Ferrule (Ref)
Ferrule (Ref)
Ferrule (Ref)
Connector
Shell
Connector
Shell