Datasheet

ManualsBrandsTE CONNECTIVITY ManualsPCB ConnectorsSocket strip Contact spacing: 2.54 mm Total number of pins: 26 1 pc(s)

Connector Specific Kit 768341-1

Typical Applicators

Lower Insert Upper Tool

AMP-LATCH Hand Tool Kit

768340-1 (Ref)

Manual Arbor Frame 

Assembly 91085-2 (Ref)

Base Assembly for the

Universal Arbor Tool

768338-1 (Ref)

*Trademark

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.

1 of 3

Instruction Sheet

TOOLING ASSISTANCE CENTER

1-800-722-1111



PRODUCT INFORMATION

1-800-522-6752

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com

LOC B

408-9831

Connector Specific Kit 768341-1

18 MAY 11 Rev B

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use

and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Figure 1

1. INTRODUCTION

This instruction sheet covers the description, cable

requirements, and installation procedures for

Connector-Specific Kit 768341-1, which is used with

AMP-LATCH Hand Tool Kit 768340-1 (see instruction

sheet 408-9828) and Base Assembly Universal Arbor

Tool 768338-1 (see 408-9827). The connector-

specific kit will terminate AMP-LATCH Standard and

Novo Receptacle Connectors having 1.27 mm [.050

in.] centerline spacing to ribbon cable (see Figure 2).

The Base Assembly Universal Arb

or Tool is used with

Manual Arbor Frame Assembly 91085-2 and

Pneumatic Auto-Cycle Unit 91112-3. Refer to 

408-7777 and 408-6732, respectively, for tooling

info

rmation.

NOTE

Dimensions on this sheet are in metric units [ with

U.S. customary units in brackets.]

Summary of content (3 pages)

PAGE 1
Instruction Sheet 408-9831 Connector Specific Kit 768341-1 18 MAY 11 Rev B PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.
PAGE 2
408-9831 2. DESCRIPTION (Figure 1) AMP-LATCH Hand Tool Kit 768340-1 (Ref) (Includes AMP-LATCH Hand Tool Subassembly 768942-1 and Base Assembly Universal Hand Tool 768339-1. Refer to 408-9846 and 408-9826.) The connector-specific kit features an upper tool and a lower insert. The upper tool applies an even force over the length of the connector during termination. The lower insert positions the connector on the tooling assembly. Each component is marked "RCPT." Locators 3.
PAGE 3
408-9831 5. CONNECTOR-SPECIFIC KIT INSPECTION Base Assembly Universal Arbor Tool  768338-1 (Ref) Upper Tool Connector-Specific Kit 768341-1 has been inspected and should be verified with the information provided in Figure 5. It is recommended that the connectorspecific kit be inspected immediately upon its arrival at your facility (and at regularly scheduled intervals) to ensure that the kit components have not been damaged during handling.