Information

93
Catalog 82181 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 2-07 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Mini-Universal MATE-N-LOK 2 Connectors
AMP
Soft Shell
Pin and Socket Connectors
Mini-Universal MATE-N-LOK 2 Connectors .163 [4.14] Centerline
High Density
Performance Characteristics
The Mini-Universal MATE-N-LOK 2
Connector performance characteristics
found on pages 93-94 are based on
free-hanging connectors, loaded with
contacts crimped on stranded wire.
Low Level Termination Resistance
20 milliohms max. total resistance
between wire crimps of a mated pin and
socket
Dielectric Withstanding Voltage
1500 V AC or DC between adjacent
circuits at sea level
Insulation Resistance—
100 megohms minimum between
adjacent circuits
Voltage Rating—600 V AC or DC
Contact Retention—15 lb. min.
per contact
Durability—25 cycles, mating and
unmating
Current Rating—up to 10.5 amps
per circuit; 2 position
Mating Force—2.5 lb. max. per circuit
Unmating Force—0.25 lb. minimum
per circuit
Product Facts
■ One molded piece, second-
ary locking plug and cap
housing assemblies
■ Three-point stabilization to
provide better terminal
position
■ Fully polarized to provide
proper plug-to-cap mating
■ Lanceless contacts for
tangle-free handling
■ Toolless contact removal
■ Tin or duplex gold plated
contacts
■ Available in 2 through 24
circuit sizes wire-to-wire
and wire-to-board
■ Mates with standard Mini-
Universal MATE-N-LOK
headers and connectors
■ Contacts available in strip
and loose piece
■ Polarized housings available
in UL 94V-0 or UL 94V-2
flammability rated material
■ Mini-Universal MATE-N-LOK 2
pins and sockets can be
intermixed in Mini-Universal
MATE-N-LOK 2 housings
■ Mini-Universal MATE-N-LOK 2
pins and sockets can not
be
used in standard Mini-
Universal MATE-N-LOK
housings
■ Contacts accept wire
size range 30-16 AWG
[.05-1.2 mm
2
]
■ .163 [4.14] centerline spacing
■ Not for interrupting current
■ Recognized under the
Component
Program of
Underwriters Laboratories
Inc. to US and Canadian
Standards, File No. E28476
■ Recognized by VDE
under Registration
Number 118488
Termination
Contact
Resistance
Crimp
Wire Size
Test Resistance
Tensile Force
AWG mm
2
Current Milliohms
Force (Min.)
(Amps) (Max. Init.)
lbs. N
30 .05 — — — —
28 .08 — — — —
26 .12 — — 4 18
24 .2 — — — —
22 .3 — — 11 49
20 .5 — — 13 58
18 .8 — — 15 67
16 1.2 — — 18 80
Technical Documents
Product Specifications
108-1693 Mini-Universal MATE-N-LOK 2
Connectors
108-1694 Mini-Universal MATE-N-LOK 2
Headers
Application Specification
114-1111 Mini-Universal MATE-N-LOK 2
Connectors
Instruction Sheet
408-3393 Mini-Universal MATE-N-LOK 2
Connectors
Mini-Universal MATE-N-LOK 2 connec-
tors also will withstand the following tests:
Housing Lock Strength—6 lb. min.
Thermal Shock— -55°C to +105°C
Temperature-Humidity Cycling—
25°C to 65°C at 95 RH
Vibration—10-55-10 cycles per
minute at .06 inch total excursion
Physical Shock—18 drops,
50 G half-sine at 11 milliseconds