AMPLIMITE Subminiature D Connectors Cable Connectors HDP-20 Crimp Snap-In Contact Connectors Product Selection Guide Connector Type Insert Material Contacts Shell Type Material and Finish Type Mounting Termination Duplex (.000030 [0.00076] Gold and Tin) Zinc Plated Steel Without Grounding Indents Plug (pg. 92) 94V-0 Rated Thermoplastic Black Tin Plated Steel Without Grounding Indents .120 [3.05] Dia. Holes Clinch Nut, 4-40 Threads Plating ➧ Pins (pgs.
AMPLIMITE Subminiature D Connectors HDP-20 Crimp Snap-In Contact Connectors (Continued) Product Facts ■ ■ Shell sizes offer wide choice of contact positions—9, 15, 25, 37 and 50 Lower cost, commercial version of the military approved series ■ Tin or zinc plated shells, with or without grounding indents Crimp snap-in contacts allows loading of only the number of contacts being used ■ ■ ■ Intermateable with any size 20 Subminiature D connector dimensionally complying with MIL-C-24308 ■ Recognized u
AMPLIMITE Subminiature D Connectors HDP-20 Crimp Snap-In Contact Connectors (Continued) Plug A B .120 [3.05] Dia. Typ. 2 Holes C Material and Finish: Grounding Indents (See Table) Cable Connectors Shell—Steel, zinc or tin plated Insert—94V-0 rated thermoplastic, black Mating Face Mounting Holes: Standard—.120 [3.05] Dia. Clinch Nut—4-40 threads with self-locking feature .230 [5.84] .420 [10.67] Ref. .432 [10.97] Max.
AMPLIMITE Subminiature D Connectors HDP-20 Crimp Snap-In Contact Connectors (Continued) Receptacle A B .120 [3.05] Dia. Typ. 2 Holes C .243 [6.17] Mating Face Cable Connectors .430 Ref. [10.92] .432 [7.90] Max. Shell Size No. of Contact Positions 1 9 1.213 30.81 .984 24.99 .494 12.55 94V-0 2 15 1.541 39.14 1.312 33.33 .494 12.55 94V-0 * 3 25 2.088 53.04 1.852 47.04 .494 12.55 94V-0 4 37 2.729 69.32 2.500 63.50 .494 12.55 94V-0 5 50 2.635 66.93 2.406 61.11 .605 15.
AMPLIMITE Subminiature D Connectors HDP-20 Basic Shielding Hardware Kits Plug .120 Typ. [3.05] 2 Holes .109 [2.77] Typ. .509 [12.93] Max. .112 [2.84] Typ. Grounding Indents Cable Connectors .230 [5.84] Plug Connector .195 Max. [4.95] Typ. Each kit contains: ■ Connector E ■ Inner shield ■ Outer shield Inside Shield Contacts and ferrules must be purchased separately.
AMPLIMITE Subminiature D Connectors HDP-20 Basic Shielding Hardware Kits (Continued) Receptacle .120 Typ. [3.05] 2 Holes .109 Typ. [2.77] .509 [12.93] Max. .112 [2.84] Typ. Rcpt. Connector .243 [6.17] .195 Max. [4.95] Typ. Cable Connectors E Inside Shield Outside Shield D .100 Max. [2.54] Ferrule (Must Be Purchased Separately) View of Rear Shell (With Shields Removed) .462 [11.73] Max. Clinch Nut (Plug and Receptacle) Recommended Cable Outer Dia. Range Max. Inner Cable Bundle Dia.† 1.535 38.
AMPLIMITE Subminiature D Connectors HDP-20 Shielding Hardware Enclosure Kits Plug Ferrule (Must Be Purchased Separately, As Required By Cable Diameter Expanding Neck Accommodates Cable .125 [3.18] Max. F Max Cable Ref. Each Kit Contains: Jackscrew Qty. 2 Cable Connectors ■ Connector ■ Inner shield ■ Outer shield ■ Enclosure ■ Two jackscrews Contacts and ferrules must be purchased separately. Material and Finish: D Max. Shield Qty. 2 .812 [20.62] Typ. 1.467 [37.26] Typ.
AMPLIMITE Subminiature D Connectors HDP-20 Shielding Hardware Enclosure Kits (Continued) Receptacle Expanding Neck Ferrule (Must Be Purchased Separately, As Required By Cable Diameter F Max .125 [3.18] Typ. Cable Ref. Cable Connectors Jackscrew Qty. 2 D Max. Shield Qty. 2 .812 [20.62] Typ. 1.467 [37.26] Typ. Enclosure E Max. Rcpt. Connector HDP-20 Shell Size No. of Contact Positions 1 9 2 15 3 25 4 37 5 50 Dimensions D E F 1.660 42.16 1.660 42.16 1.660 42.16 2.010 51.05 2.010 51.
AMPLIMITE Subminiature D Connectors Shielded Connector, Preassembled Kit Cable Connectors Designed to meet the requirements of Local Area Networking, this Subminiature D Shielded Connector Kit is available with slide latches attached to the receptacle. The receptacle is shielded and covered with a durable plastic enclosure. This shielding decreases emissions and provides an effective EMI/RFI barrier.
AMPLIMITE Subminiature D Connectors HDP-20 Ferrules for Shielding Hardware Kits Ferrules for Shielding Hardware Kits .020 [0.
AMPLIMITE Subminiature D Connectors HDP-20 Connector Contacts, Precision Formed Contact Size 20 DF Pin Diameter .040 [1.02] Crimp Snap-In Contacts Material and Finish: With Insulation Support Cable Connectors Pin—Brass Socket—Phosphor bronze Plated A—Select—Gold flash over nickel on entire contact, with additional .000030 [0.00076] gold on mating end B—Duplex—.000030 [0.
AMPLIMITE Subminiature D Connectors HDP-20 Connector Contacts, Precision Formed (Continued) Contact Size 20 DF Pin Diameter .040 [1.02] .025 [0.64] Square Posted Contacts Stabilizer Stabilizer Material and Finish: Pin—Brass Socket—Phosphor bronze Plated: A—Duplex plated .000030 [0.00076] gold on mating end, with entire contact .000050 [0.00127] min. nickel underplated B—Duplex plated gold flash on mating end, with entire contact .000050 [0.00127] min.
AMPLIMITE Subminiature D Connectors HDP-20 Application Tooling Cable Connectors HDP-20 contacts may be applied by a variety of hand tools and machines. For low production runs, repairs and prototype work, we offer either our premium CERTI-CRIMP Hand Tool or our commercial PRO-CRIMPER II Hand Tool. For medium-volume production, you have the choice of our AMP-O-LECTRIC Model “G” Terminating Machine, our new Model “M” Terminating Machine, or our AMP-O-MATIC Model II Stripper-Crimper Machine.
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors Cable Connectors Product Selection Guide Type Plug (pg. 105) Connector Shell Type Insert Material and Material Finish 94V-0 Rated Thermoplastic, Black Tin Plated Steel with Grounding Indents Contacts Mounting .120 [3.05] Dia. Holes Type ➧ Pin (pg. 109) Termination Plating Duplex (.000030 [0.00076] Gold and Tin) Crimp Duplex (Gold Flash and Tin) ➧ Receptacle (pg.
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Product Facts: ■ ■ ■ Approximately 65% higher density than HD-20 connectors Lower cost, commercial version of the military approved Series 90 family Available with shielding overmold hardware and shielding enclosure kits Capable of using numerous standard HD-20 cable clamps and mating hardware Cable Connectors ■ ■ ■ ■ Low cost, high performance, precisionformed crimp contacts Intermateable with any size 22 Subm
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Plug A B .120 [3.05] Dia. 2 Holes C Plug (With Grounding Indents) Grounding Indents (See Table) Mating Face .230 [5.84] Cable Connectors .420 [10.67] Ref. Receptacle .432 [10.97] Max. .100 [2.54] Max. Receptacle Clinch Nut (Plug and Receptacle) A B Material and Finish: Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts and ferrules must be purchased separately. .120 [3.05] Dia.
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Basic Shielding Hardware Kits Plug .120 [3.05] Dia. 2 Holes Plug Connector .195 [4.95] Max. Typ. .230 [5.84] Typ. Plug Cable Connectors C Ferrule (Must Be Purchased Separately) D Receptacle Receptacle .120 [3.05] Dia. 2 Plc. Each kit contains: ■ Connector ■ Inner shield Rcpt. Connector ■ Outer shield Contacts and ferrules must be purchased separately. .195 [4.95] Max. Typ.
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Shielding Hardware Enclosure Kits Expanding Neck, Accommodates Cable Plug E Max. D Max. Ferrule (Must Be Purchased Separately, As Required By Cable Diameter Cable Ref. .125 Max. [3.18] 4-40 Jackscrew Qty. 2 C Max. 1.467 [37.62] Typ. Shield Qty. 2 .812 [20.62] Typ.
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Ferrules for Shielding Hardware Kits .020 [0.51] Stepped Cable Connectors L Shell Sizes Style 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Stepped 1-3 Straight 1-3 Straight Instruction Sheets— 408-9507 408-9508 408-9243 408-9242 4-5 Stepped 4-5 Stepped 4-5 Stepped Note: Instruction Sheets for TE Tooling are packaged with the tooling.
AMPLIMITE Subminiature D Connectors HDP-22 Crimp Snap-In Contact Connectors (Continued) Material Precision Formed Crimp Snap-In Contacts, Size 22 DF Pin—Brass Socket—Phosphor bronze Finish A—Duplex plated .000030 [0.
AMPLIMITE Subminiature D Connectors Cable Connectors HDE-20 IDC Connectors for Discrete Wire and Jacketed Cable Product Selection Guide Contacts Pre-Loaded* Connector Type Insert Material Shell Type Material and Finish Mounting Type Termination Plating Plug All-Plastic (pg. 112) Metal-Shell (pg. 114) 94V-0 Rated Thermoplastic, Black Tin Plated Steel .120 [3.05] Dia. Holes ➧ Pins Insulation Displacement * Interchangeable crimp snap-in contacts available, see page 121 Duplex (.000030 [0.
AMPLIMITE Subminiature D Connectors HDE-20 IDC Connectors for Discrete Wire and Jacketed Cable (Continued) Product Facts ■ Insulation displacement contacts preloaded in housings ■ No wire stripping Post plated contacts with no bare edges ■ ■ ■ Removable contacts for replacement and repair Selective loading of contacts available ■ Crimp snap-in contacts available for making jumpers between circuits ■ Recognized under the Component Program of Underwriters Laboratories Inc., File No.
AMPLIMITE Subminiature D Connectors HDE-20 All-Plastic IDC Connectors Plug .109 [2.77] Ref. Molded Cavity Indentification & AMP Trademark .112 [2.85] Typ. .120 [3.05] Dia. 2 Holes .509 Max. [12.93] B A Plug .230 [5.84] Material and Finish: Cable Connectors Housing—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
AMPLIMITE Subminiature D Connectors HDE-20 All-Plastic IDC Connectors (Continued) Receptacle Molded Cavity Indentification & AMP Trademark .109 [2.77] Ref. .112 [2.85] Typ. .120 [3.05] Dia. 2 Holes .509 Max. [12.93] B A Receptacle .243 [6.17] Material and Finish: Cable Connectors Housing—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
AMPLIMITE Subminiature D Connectors HDE-20 Metal-Shell IDC Connectors Plug .109 [2.77] Ref. .120 [3.05] Dia. 2 Holes .112 Typ. [.285] .509 [12.93] B Cable Connectors A .230 [5.84] Material and Finish: Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
AMPLIMITE Subminiature D Connectors HDE-20 Metal-Shell IDC Connectors (Continued) Receptacle .109 [2.77] Ref. .120 [3.05] Dia. 2 Holes .112 Typ. [.285] .509 [12.93] B A Material and Finish: Cable Connectors .243 Typ. [6.17] Shell—Steel, tin plated Insert—94V-0 rated thermoplastic, black Contacts—Phosphor bronze Contact Finish—Duplex plated: A—.000030 [0.
AMPLIMITE Subminiature D Connectors HDE-20 Basic Shielding Hardware Kits Plug .120 Dia. [3.05] 2 Holes .109 [2.77] Typ. .509 Max. [12.93] .112 [2.84] Typ. Plug Connector .230 [5.84] Typ. .086 [2.18] Max.Typ. Each kit contains: ■ Connector Cable Connectors ■ Inner shield .377±.015 [9.58±0.38] ■ Outer shield Ferrules must be purchased separately.
AMPLIMITE Subminiature D Connectors HDE-20 Basic Shielding Hardware Kits (Continued) Receptacle .120 [3.05] Dia. 2 Holes .109 [2.77] Typ. .509 Max. [12.93] Rcpt. Connector .243 [6.17] Typ. .112 [2.84] Typ. .086 [2.18] Max.Typ. Each kit contains: ■ Connector Cable Connectors ■ Inner shield .377 [9.58] ■ Outer shield Ferrules must be purchased separately.
AMPLIMITE Subminiature D Connectors HDE-20 Shielding Hardware Enclosure Kits Plug Expanding Neck Accommodates Cable Ferrule (Must be Purchased Separately as Required by Cable Dia.) .630 [16.00] Max. Cable Connectors Each kit contains: ■ Connector ■ Inner shield ■ Outer shield ■ Enclosure ■ Two jackscrews Ferrules must be purchased separately. 1.640 Max. [41.
AMPLIMITE Subminiature D Connectors HDE-20 Shielding Hardware Enclosure Kits (Continued) Receptacle Expanding Neck Accommodates Cable .630 [16.00] Max. Ferrule (Must be Purchased Separately as Required by Cable Dia.) Each kit contains: ■ Connector ■ Inner shield ■ Outer shield ■ Enclosure ■ Two jackscrews Ferrules must be purchased separately. Cable Ref. 1.640 Max. [41.
AMPLIMITE Subminiature D Connectors HDE-20 Crimp Snap-In Contact Connectors Ferrules for Shielding Hardware Kits .020 [0.
AMPLIMITE Subminiature D Connectors HDE-20 Contacts, Precision Formed Material and Finish: Phosphor bronze, duplex plated as follows: A—Duplex plated .000030 [0.
AMPLIMITE Subminiature D Connectors HDE-20 Application Tooling Hand Tools with Modular Heads Technical Documents: Air Pistol Grip Tool Manual Pistol Grip Tool Cable Connectors Instruction Sheets— 408-6790 408-9414 408-6789 Note: Instruction Sheets for TE Tooling are packaged with the tooling. For additional information call the Tooling Assistance Hotline: 1-800-722-1111. A modular interchangeable head provides versatility to these tools.
AMPLIMITE Subminiature D Connectors HDE-20 Application Tooling (Continued) Product Facts CHAMPOMATOR 3A Terminating Machine Low applied costs ■ Automatic termination of jacketed cable ■ Automatic continuity check and shorts test ■ Single- or double-ended assemblies ■ Microprocessor controlled with touch input screen ■ Stored program capability ■ Selective termination of connector positions ■ Rapid tooling changeover for different connector types ■ Handles a variety of TE insulation-displa
AMPLIMITE Subminiature D Connectors Subminiature D Connectors HDF-20 for Flat Ribbon Cable Cable Connectors Product Facts Plug — Low Profile Metal Shell ■ Available in all 5 standard shell sizes ■ Visual inspection of termination possible ■ Fluted cover provides positive alignment of cable prior to termination ■ Wide range of application tooling ■ Patented insulation displacement contact latches into the connector cover ■ Contact design provides a “gas-tight” termination ■ Contacts accept
AMPLIMITE Subminiature D Connectors HDF-20 Low Profile All-Plastic Connectors (for Round Conductor Flat Ribbon Cable) Material and Finish Plug Assemblies Receptacle Assemblies Housing, Cover & Cable Stabilizer—Black thermoplastic, 94V-0 rated Threaded Inserts—Brass, unplated Pin Contacts—Phosphor bronze, duplex plated .000030 [0.00076] gold on mating end, .000100-.000200 [0.00254-0.00508] bright tin on termination end, with entire contact underplated .000050 [0.
AMPLIMITE Subminiature D Connectors HDF-20 Plugs/Receptacles Mating and Panel Mounting Specifications Plug/Receptacle Mating Panel Cutouts .265±.015 Shell Sizes 1 & 2 [6.73±0.38] .256±.015 Shell Sizes 3, 4 & 5 [6.50±0.38] A 10° ± 2° (2 Places) C D J* E F Cable Connectors Plug Receptacle .120± .002 [3.05± 0.05 ] (2 Places) K Radius (4 Places) H* B CL The .265/.256 [6.73/6.50] dimensions are required to assure full mating of connector halves.
AMPLIMITE Subminiature D Connectors HDF-20 Application Tooling Application Tooling Cable Connectors Hand Tool Kit No. 768340-1 Consists of a hand tool frame, a universal base assembly, a bench mount kit, and connector-specific tooling for AMP-LATCH Standard and Novo Receptacles, Card-Edge Connectors, and AMPLIMITE HDF-20 Connectors. Note: For 50-position HDF connectors, you must also order ConnectorSpecific Kit No. 768350-1. Note: All part numbers are RoHS compliant.
AMPLIMITE Subminiature D Connectors HD-20 Solder Cup Connectors Cable Connectors Product Facts ■ Preloaded duplex-plated solder cup contacts ■ Shell finish in choice of standard zinc or tin ■ Two-piece 94V-0 rated plastic insert ■ Anti-solderwicking contact design ■ Intermateable with other subminiature D connectors ■ Available in 9, 15, 25 and 37 position (shell sizes 1-4) plugs and receptacles ■ Easy application without special application tools ■ Shields offer full EMI shielding and ESD
AMPLIMITE Subminiature D Connectors HD-20 Solder Cup Connectors (Continued) Plug A B .493 [12.50] Ø .122 [3.10] Clinch Nut #4-40 UNC x 3.0 2 Plcs. Material and Finish: Shell—Steel, tin or zinc plated Insert—94V-0 rated thermoplastic, black Contacts—Phosphor bronze; duplex plated with gold flash on mating end, tin on solder cup, with entire contact nickel underplated Grounding Indent .607 ± .015 [15.40 ± 0.38] .047 [1.20] Cable Connectors .426 [10.
AMPLIMITE Subminiature D Connectors HD-20 Solder Cup Shielding Hardware Enclosure Kits Plug and Receptacles C .886 [22.
AMPLIMITE Subminiature D Connectors Accessories Numerous accessories are available for strain relief and cable clamping, shielding, connector-to-connector mating, connector-toconnector pc board mounting, and keying. These accessories are illustrated and tabled on the following pages. Cable Connectors To help discern the accessories available for a particular connector type, refer to the Product Selection Guide at the beginning of the connector section.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps Material and Finish: Universal Cable Clamps for Jacketed Cable Cable Clamp Housing— Thermoplastic, black Cable Clamp Wedge Set— Thermoplastic, black 4-40 Mounting Screws— Steel, zinc plated Related Product Data: 2.090 [53.09] 2.105 [53.47] HDE or HDP Plug or receptacle (Shown for Ref.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) The TE Quik-Snap Backshell Kit is a one-piece, all-plastic cable clamp kit designed for use with either the AMPLIMITE HDP-20, HDP-22, or HDE, all-plastic or metal-shell connectors. One-Piece, All-Plastic Cable Clamp for Jacketed Cable, 180°/120° Exit (HDP and HDE) (Quik-Snap) .700±.010 [17.78±0.25] Cable Gate Kits are available for connector sizes 1, 2, 3, and 4 with a cable exit option of 180° or 120°. Cable Exit A 1.928 [48.
AMPLIMITE Subminiature D Connectors Unshielded Cable Connector and Clamp Kits The AMPLIMITE Quik-Snap Backshell and Connector kit presents a complete package for your unshielded subminiature D connector needs. Kits are available for Shell Sizes 1, 2 and 3, and are packaged 25 and 100 kits per unit. One-Piece, All-Plastic Cable Clamp for Jacketed Cable, 180°/120° Exit and HDP-20 and HDE-20 Connector Retainer Clip 2.079 [52.81] Max.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps Straight Exit Low Profile for Jacketed Cable F Cover Cable Support Gate (See Note 3.) Cable Support Gate A M Cover B Cable Connectors Low Profile Cable Clamps feature a two-piece construction which allows the two cover halves to be snapped together, no hardware is required for assembly. They can be used on plugs or receptacles and will not interfere with commonly used mating hardware.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Material Slide-On Back Covers Black thermoplastic HDE Plug or Receptacle Related Product Data: Cable Connectors Connectors used with: HDE All-Plastic—pages 112 & 113 HDE Metal-Shell—pages 114 & 115 Other accessory capabilities: RFI/EMI Metal Shields— pages 141 & 142 Male Screw Retainers— pages 146 & 147 Locking Posts and Slide Latches— pages 149-151 Latching Blocks—pages 153 & 154 Cover Halves Latch Here and on Opposite Side Cov
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Box and Lid Straight/90° Exit A Max. 1.70 [43.18] B Max. B Max.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Cable Connectors Straight/45° Exit Cable Clamps can be used on either a plug or receptacle and will not interfere with commonly used hardware, such as Male Screw Retainers, Female Screw-locks or Spring Latches and Latching Blocks. Their hinged construction allows easy assembly to a harness.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Material and Finish: Straight Exit Dataphone Cable Clamp Housing— Nylon, black 4-40 Fillister Head Screws & Hex Nuts—Steel, clear zinc plated Jackscrews—Steel, black zinc plated A Max. B Metal-Shell HDP-20 Plug or Receptacle (Shown for Ref. only) Related Product Data: Connectors used with: HDP Metal-Shell—pages 90-102 .770 [19.56] Shell Size 2 3 Dimensions B A 1.575 40.01 2.115 53.72 Max. Cable Dia. (without Gate) 1.
AMPLIMITE Subminiature D Connectors Unshielded Cable Clamps (Continued) Cable Connectors Straight/90° Exit Cable Clamps can be used on a plug or receptacle and will not interfere with commonly used mating hardware. Their three-piece construction allows easy assembly to a cable harness. Also, the same cable clamp components are used for both straight and 90° cable exit applications. This is accomplished by simply positioning the Male and Female Panels on the Yoke for the desired angle.
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps Straight Exit RFI/EMI Shields for Jacketed Cable (Two-Piece) 1.920 [48.77] C 4-40 Male Jackscrew Kit Nos.: 747784-8 (bulk packed)*† HDE or HDP Plug or Receptacle (Shown for Ref. only) Shell Size 1 A *Each part is individually bulk packed for multiple kit orders. †Slotted for screwdriver use. D Dimensions B C 1.910 48.51 1.215 30.86 Cable O.D. (Max.) D .200 5.08 .250 6.35 .370 9.40 .225 5.72 .300 7.62 .375 9.53 .430 10.92 .280 7.11 .
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Cable Connectors Both the straight exit and the 90° exit die cast RFI/EMI shield allows cable to be fully prepared and terminated to the connector before the shield is installed. During installation, the shield of the jacketed cable is folded back and compressed into the cable opening of the RFI/EMI shield. For greater cable support and/or shielding effectiveness, splitring and crimp ferrules are available (pages 143-145).
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Material and Finish: Outer Ferrule—Copper, plated .000100 [0.00254] min. tin Inner Ferrule—.023 [0.58] thick brass, plated .000050 [0.00127] tin over copper Crimp Ferrules for Braided Cable Shield (See pages 144 & 145 for Inner and Outer Ferrule Part Numbers.
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Crimp and Split-Ring Ferrules Shell Size Cable Dia. (Max.) Cable Connectors 1 2 3 .200 5.08 .240 6.10 .250 6.35 .280 7.11 .370 9.40 .225 5.72 .240 6.10 When using these Shield Kits 90° Exit Die Cast Straight Exit Shield Kit No. Shield Kit No. Without With Metal-Plated Die Cast Slide Slide Plastic Latch Latch Split-Ring* Ferrule No. Inner Crimp Ferrule No. and Tooling No.
AMPLIMITE Subminiature D Connectors Shielded Cable Clamps (Continued) Crimp and Split-Ring Ferrules (Continued) Shell Size 5 .240 6.10 .280 7.11 .350 8.90 .350 8.90 .430 10.92 .500 12.70 .525 13.34 .575 14.61 .650 16.51 .240 6.10 .365 9.27 .375 9.53 .430 10.92 .450 11.43 .525 13.34 .530 13.46 .600 15.24 .650 16.51 .675 17.15 .750 19.05 When using these Shield Kits 90° Exit Die Cast Shield Kit No. Straight Exit Shield Kit No.
AMPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) HDF-20 Metal-Shell or All-Plastic Plug (Shown for Ref. only) .037 [0.94] Dia. Max. .112 [2.84] Material and Finish: Brass, .004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) .108 [2.74] Related Product Data: .212 [5.38] Max. Notes: 1. Use punching tool to remove undesired pin commoning locations on commoning strip. Use mating receptacle to seat strip over pins in plug.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material and Finish: Male Screw—Steel, zinc plated yellow chromate Retaining Clip—.012 [0.51] stainless steel Male Screw Retainers for All-Plastic Connectors (HDE) Related Product Data: 4-40 Male Screw Connectors used with: HDE All-Plastic—pages 112 & 113 .220 [5.59] Technical Documents: Instruction Sheet—408-7837 Cable Connectors All-Plastic Plug or Receptacle (Shown for Ref. only) .280 [7.11] .250 Retaining Clip [6.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material and Finish: All Parts—Cold rolled steel, zinc plated clear or yellow chromate .188† [4.78] Female Screwlocks for Metal-Shell and All-Plastic Connectors (HDE, HDF, HDP) C Style (B).
AMPLIMITE Subminiature D Connectors Hardware (Continued) Slide Latches Style I Material and Finish: 4-40 Screws, Washers and Hex Nuts—Steel, zinc plated yellow chromate 2-56 Screws, Washers and Hex Nuts—Steel, zinc plated clear chromate Slide Latch—Stainless steel .135 [3.43] Metal-Shell or All-Plastic Plug or Receptacle (Shown for Ref. only) Slide Latch (See Note 3.) 4-40 Screw (2 Supplied) .165 [4.19] C A B Max.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Slide Latches Slide Latch Style III (for Shell Sizes 2, 3 or 5) 4-40 Locking Post Cable Connectors Slide Latch Style II (for Shell Sizes 2, 3 or 5) 2-56 Locking Post Typical Applications of Locking Posts and Slide Latches Typical Applications of Locking Posts and Slide Latches Shell Size Style 1 I II 2 III II 3 III 4 I 5 III A 1.397 35.48 1.725 43.82 1.725 43.82 1.725 43.82 1.725 43.82 1.725 43.82 1.725 43.82 2.265 57.53 2.265 57.53 2.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Slide Latch Clip Assembly for Unfiltered Mating Half Plug or Receptacle (See Note 2.) L Screw Clip Material and Finish: Style 1 Screw, Washers and Hex Nut—Cold rolled steel, zinc plated clear chromate Clip—Stainless steel .165 [4.19] Style 2 Technical Documents: Instruction Sheet—408-7785 Rolled Edge Lock Washer Hex Nut Kit Part Numbers: Thread Size Screw Length L 4-40 .415 10.54 2-56 .547 13.89 Part No. Screw Style Pkg.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material .015 [0.38] Stainless steel Related Product Data: Connectors used with: HDE Metal-Shell—pages 114 & 115 HDP Metal-Shell (Tin plated only)— pages 90-102 Spring Latches for Cable Clamps with Mounting Ears (Two-Piece) Spring Latch Straight Exit RFI/EMI Shield (Shown for Ref. only. See Note 1.) Metal-Shell Plug or Receptacle (Shown for Ref. only) Technical Documents: Instruction Sheet—408-9130 .230 [5.84] Cable Connectors Spring Latch .
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material and Finish: Latching Blocks—Zinc Pan Head Screws—Steel, zinc plated Latching Blocks with Threaded Hole Metal-Shell or All-Plastic Plug or Receptacle (Shown for Ref.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Material Latching Blocks with Slot Recess and Thru Hole Latching Blocks—Zinc Metal-Shell or All-Plastic Plug or Receptacle (Shown for Ref. only, See Note 2.) Related Product Data: Cable Connectors Connectors used with: HDE Metal-Shell or All-Plastic— pages 112-115 HDF Metal-Shell or All-Plastic— pages 125 & 126 HDP Metal-Shell—pages 90-102 HD Board Mount—pages 54-71, 78-85, 87-89 Mating/Panel Mounting—page 136 .120 [3.05] Dia.
AMPLIMITE Subminiature D Connectors Hardware (Continued) Standoff Bushings 4-40 Screws (Customer Supplied) Material: Metal-Shell Plug or Receptacle (Shown for Ref. only) Aluminum Related Product Data: Standoff Bushing Connectors used with: HD Straight Posted— pages 76-85, 87-89 .250 [6.35] 4-40 Threads (thru) Cable Connectors .435 [11.
