Information

108-10037
Rev A 3 of 6
Test Description Requirement Procedure
Crimp Tensile Wire
Size
AWG
10
12
14
16
Minimum Crimp
Tensile
Pounds
150
130
70
50
Determine crimp tensile at a rate of
1 inch/minute; Test Specification
109-16.
Durability See note (a). Mate and unmate contacts
assembled in housing for 500
cycles (gold and silver) and 250
cycles for (tin-lead) at a maximum
rate of 300 cycles per hour;
Test Specification 109-27.
ENVIRONMENTAL
Humidity-Temperature Cycling See Note. Subject mated contacts assembled
in housing to 10 humidity-
temperature cycles between 25°
and 65°C at 95% RH,
Test Specification 109-23-4,
cond B
Mixed Flowing Gas See Note. Subject mated contacts assembled
in housings to class III for 20 days;
Test Specification 109-85-3.
Temperature Life See Note. Subject mated contacts assembled
in housings to a maximum rated
temperature for 240 hours; Test
Specification 109-43.
Figure 1 (end)
NOTE
Shall meet visual requirements, show no physical damage, and shall meet
requirements of additional tests as specified in the Test Sequence in Figure 2.