Datasheet

135
Catalog 1307819 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 8-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
AMPMODU Interconnection System
Note: All part numbers are RoHS compliant.
Low Profile Headers,
Shrouded
5
AMP-LATCH Low Profile Headers—Shrouded, with .150 [3.81] End
Dimension, Double-Row, .100 x .100 [2.54 x 2.54] Centerline
Material and Finish
Housing — Glass-filled nylon, black,
94V-0 rated
Posts — Copper alloy, plated as follows:
Plating A — Gold flash over .000030
[0.00076] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Plating B — Gold flash over .000015
[0.00038] min. palladium-nickel plate
on the mating surfaces, .000100
[0.00254] min. tin plate on soldertails,
with entire post underplated .000050
[0.00127] min. nickel
Related Product Data
Electrical Characteristics —
page 134
Mateable Connectors —
AMPMODU Wire-Applied
Receptacles — page 220
AMPMODU Board Mount
Receptacles — pages 179, 180
Short Point Wire-Applied
Connectors — page 224
.025 [0.64] Square
Straight Post
.045
[1.14]
.165
[4.19]
.100
[2.54]
.075
±.002
[1.91
±0.05
]
.025
±.001
[0.64
±0.03
]
.360
[9.14]
.130
[3.30]
A
B
Ty p.
(2 Plc.)
(2 Plc.)
.040
.035
[
1.02
]
0.89
.020
.015
[
0.51
]
0.38
.385
[9.78]
.185
±.010
[4.70
±0.25
]
.185
[4.70]
.100
[2.54]
.120
±.015
[3.05
±0.38
]
.200
[5.08]
.015
.010
[
0.38
]
0.25
.240
[6.10]
Ty p.
Recommended PC Board Hole Layout
For Manual Insertion
.100±.003*
[2.54±0.08]
.040±.003
[1.02±0.08]
.100±.003*
[2.54±0.08]
Ty p.
Dia. Typ.
*±.003 [±0.08] tolerances not to accumulate
within one connector pattern.
(Contact
Area)
No. of
Dimensions Post Plating/Part Nos.
Pos.
A B Plating A Plating B
10 .800 [20.32] .400 [10.16] 5103309-1 5103308-1
14 1.000 [25.40] .600 [15.24] 5103309-2 5103308-2
16 1.100 [27.94] .700 [17.78] 5103309-3 5103308-3
20 1.300 [33.02] .900 [22.86] 5103309-5 5103308-5
24 1.400 [35.56] 1.100 [27.94] — 1-5103308-3
26 1.600 [40.64] 1.200 [30.48] 5103309-6 5103308-6
34 2.000 [50.80] 1.600 [40.64] 5103309-7 5103308-7
40 2.300 [58.42] 1.900 [48.26] 5103309-8 5103308-8
50 2.800 [71.12] 2.400 [60.96] 1-5103309-0 1-5103308-0
60 3.300 [83.82] 2.900 [73.66] — 1-5103308-2