Information

6
Catalog 1242132 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 5-07 unless otherwise specified. reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
D-1000 Series (Wire-to-Board, Wire-to-Panel and Wire-to-Wire)
AMP Dynamic Series Connectors
D-1000 Series
Product Facts
■ Header and tab connectors
have enough length from the
tip of contact to top of
housing to help prevent
contact from bending when
r
eceptacle mates to tab
connector.
■ D-1000 has housing lance
structure. Without contact
lance, it is expected to
avoid contact lance broken
in terminal process
handling
■ Clear identification of circuit
number provides for correct
wiring
■ Metal retention leg
assembly tab header helps
prevent damage from
unexpected cable tension
■ Housing lock design
D-1100
D-1200
D-1500
D-1000 Series are the
smallest connectors for
signal lines in the
Dynamic connector series.
D
-1000 Series occupies
40% less volume than the
D-2000 Series, so it can
contribute to customers’
equipment miniaturizing
requirement.
D-1000 Series receptacle
and tab contacts have a
wide wire range, 30 through
18 AWG with 2.2 mm wire
insulation diameter maximum,
which is commonly used for
electrical cabinet wiring.
D-1000 Series housings
consist of D-1110 Series
for 2.0 mm centerline and
D-1200 Series for 2.5 mm
centerline as the standard
type. In addition, D-1500
Series housings are for
3.5 mm centerline sensor
applications or branch
connection of power lines.
D-1000 Series has gold
plated contacts as standard
and also tin plated contacts
for economical market
needs. Customers have
a choice of contacts
depending on specifications,
application, and cost.
Crimping hand tool features
a changeable die set
structure. It offers minimal
installation tooling cost.
This tooling system will
evolve to D-2000, D-3000
and D-4000 Series in
the future.