Information

TE AUTOMOTIVE /// MCON INTERCONNECTION SYSTEMPAGE 8
MCON Interconnection System
Catalog 1308070-4
Revised 10-2014
Receptacle Contacts – Locking Lance (LL)
MCON 2.8mm Contact System
17.5 – 20.0
3.8
4.3
*) Material and Finish: xxx-1 = CuNiSi, pre-tin plated Note: All part numbers are
R
) The pre- and suffix for the
r
) In case of Tooling query
xxx-3 = CuNiSi, selective silver plated RoHS and ELV compliant applicators depends on the please contact your local
applied termination equipment TE Connectivity representative
Technical Features
Contact Material:
CuSn/CuNiSi
Wire Size Range:
0.20 – 4.0mm
2
Current Carrying Capacity:
up to 36 Ampere
(at 80° C ambient temperature)
Total Temperature Range:
-40° C … +130° C (tin plated)
-40° C … +150° C (silver plated)
Insertin Force:
Max. 7 N
Extraction Force:
Max. 6 N
Extraction Tool*:
5-1579008-2
Product Drawing:
1719797
Product Specification:
108-94002
Application Specification:
114-18718
Standard Receptacle Contacts (SRC)
Part Numbers
Wire Size Range
(mm
2
)
Insulation Diameter
(mm) FLR
Material and Finish *) Strip Form Applicator
R
) Hand Tool Die Set
0.20 – 0.35 1.15 – 1.40 -1 / -3 1719836 x-2151590-x
539635-1
9-1579004-6
0.50 1.4 – 1.6 -1 / -3 1563719 x-2151566-x 9-1579004-7
0.75 – 1.00 1.7 – 2.1 -1 / -3 1719838 x-2151390-x
9-1579004-7
>1.0 – 2.50 2.2 – 3.0 -1 / -3 1719840
x-2151509-x
a)
x-2151604-x
b)
9-1579004-8
>2.5 – 4.00 3.4 – 3.7 -1 / -3 1718475 x-2151389-x
9-1579004-9
Receptacle Contacts with Single Wire Seal (SWS) System
Part Numbers
Wire Size Range
(mm
2
)
Insulation Diameter
(mm) FLR
Material and Finish *) Strip Form Applicator
R
) Hand Tool Die Set
0.50 1.4 – 1.6 -1 / -3 1563935 x-2151513-x On request
r
) 6-1579014-7
0.75 – 1.00 1.7 – 2.1 -1 / -3 1670802 x-2151561-x
539635-1
6-1579014-1
>1.0 – 2.50 2.2 – 3.0 -1 / -3 1670804
x-2151570-x
a)
x-2151582-x
b)
6-1579014-2
>2.5 – 4.00 3.4 – 3.7 -1 / -3 1670806 x-2266517-x 6-1579014-3
a) all wire sizes except for 2.5 ACOME b) for 2.5mm
2
ACOME Wire only (preliminary)
a) all wire sizes except for 2.5 ACOME b) for 2.5mm
2
ACOME Wire only
* The option which extraction tool is the right tool for the application is dependent on the assembly of the contact and the connector.