Datasheet
39
Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666
Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686
Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999
www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015
Ribbon Cable Interconnect Solutions
Micro-MaTch Miniature Connector System —
Paddle Board Connector
Micro-MaTch Miniature Connector System —
Paddle Board Connector
Direct soldering of a ribbon
cable onto a PC Board is
a very difficult job with the
smaller sizes of ribbon
cable. If such a permanent
cable connection is
required, the application
can be facilitated by using
this connector type.
The Paddle Board connec-
tor is applied to the ribbon
cable with the same appli-
cation tooling, available
for the termination of the
Male-on-Wire connector.
The solder legs are
indented and provide
mechanical retention of the
connector/cable assembly
in the PC Board before and
during soldering.
This Paddle Board connec-
tor version is designed to
be soldered onto PC
Boards with a nominal thick-
ness of 1.6 mm.
A
A
A
B
5
.00
[.197]
2.54
[
.100]
1.27
[
.050]
6
.75
[.266]
0.80
[
.031]
2.54
[.100]
2.54
[.100]
1.27
[.050]
7.10
[.280]
Typical Hole Pattern
Not Solder Side Shown
S
ection A-A
Notes:
1. To enable automatic Pick & Placement, connectors are always packed
in embossed tape according EIA481 specification.
2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm.
3. Connectors are supplied with or without a feature for vacuum
Pick & Placement.
4. For this connector no additional solder hold down is required.
No. of Positions
Dimensions (mm) Part Numbers
A B C 2500 Connectors/Reel 250 Connectors/Box
4 8.6 5.4 3.81 215570-4 7-215570-4
6 11.1 8.0 6.35 215570-6 7-215570-6
8 3.6 10.5 8.89 215570-8 7-215570-8
10 16.2 13.0 11.43 1-215570-0 8-215570-0
12 18.7 15.6 13.97 1-215570-2 8-215570-2
14 21.3 18.1 16.51 1-215570-4 8-215570-4
16 23.8 20.7 19.05 1-215570-6 8-215570-6
18 26.3 23.2 21.59 1-215570-8 8-215570-8
20 28.9 25.7 24.13 2-215570-0 9-215570-0
24 34.0 30.8 29.21 2-215570-4 —
No mate — direct soldering
of ribbon cable onto the
PC Board
METRIC
Dimensions are
millimeters over inches