User Manual

8.9.5 Networks
Network • Depending on the option selected, the network
selection search mode will be:
• Automatic • The first network searched for is the network you
used last.
• Manual • The choice of the network connection is left up to
the user.
Preferred • List of networks to which you wish to be connected
networks in order of priority (update this list using ).
GPRS • Two modes available:
connection
(1)
• When needed • GPRS mode active depending on connection
requirements.
• Always • GPRS mode continuously active.
48
(1)
Depending on network availability.
8.9.2 Languages
(1)
Display language for messages (select using ).The “Automatic” option
selects the language according to the home network (if available).
8.9.3 Input method
(2)
Please see chapter “Latin input mode”, page 72. In addition to the specific
characters table for Cyrillic, Chinese, other data input modes are also
available in your telephone. This feature allows you to write short
messages and add names with special characters to your directory.
8.9.4 Security
Activate PIN • The SIM card protection code is requested each
time as the phone is powered on if this code is
activated.
Change PIN • Change PIN code.
Change PIN2 • A protection code for certain SIM card features
(Billing/Cost/FDN, etc.) will be requested if you
attempt to access it, if the code is activated. Select
to update it with a new one (between 4 and 8
digits).
Activate phone • It is requested each time as the phone is powered
code on if this code is activated.
Change phone • Change phone password, its initial one is 1234.
code
Fixed dialed • It allows the phone to be "locked" so that it can only
number dial certain numbers, or numbers with certain
prefixes. To activate this function, PIN2 code is
mandatory.
47
(1)
Contact your network operator to check service availability.
(2)
Depending on the language.
K7S_UM_USA_16-01-07 16/01/07 12:05 Page 47