MIC MECHANIC 2 Ultra-Simple Battery-Powered Vocal Effects Stompbox with Echo, Reverb and Pitch Correction User Manual
MIC MECHANIC 2 User Manual Important Safety Instructions Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with ¼" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.
MIC MECHANIC 2 User Manual 1. Controls (1) (2) (3) (4) (5) (8) (6) (9) (10) (11) (12) (7) (1) ECHO knob selects the type and amount of echo effect on your voice. Adjusting the knob within your preferred echo style determines how loud the echoes will be. Turning the knob fully counterclockwise turns the echo effect off. There are 3 types of echo available: (8) USB input accepts a micro USB cable for connection to a computer.
MIC MECHANIC 2 User Manual 2. Operation Micro USB cable MP-75 microphone Mixing board Power cable Connection • Connect a microphone to the MIC jack • Connect the OUT jack to a mixer, interface or active speaker • Connect the power cable (optional) • Connect a micro USB cable to a computer (optional) Tap Tempo The echo tempo can be manually adjusted to match the song you’re performing. Simply hold the Footswitch down for about 2 seconds to enter Tap Mode.
MIC MECHANIC 2 User Manual 3. Specifications Input Mic Input Impedance: Balanced: 2.68 kOhm Mic Input Level @ 0 dBFS: -42 dBu to +1 dBu EIN @ Max Mic Gain Rg = 150 Ohm: -126 dBu Mic input SNR: >104 dB Output Output Impedance, Bal./Unbal.: 200/100 Ohm Output Full Scale: +1 dBu Dynamic Range: >104 dB, 20 Hz to 20 kHz Frequency Response: +0/-0.
MIC MECHANIC 2 Ultra-Simple Battery-Powered Vocal Effects Stompbox with Reverb, Echo and Pitch Correction
