Instructions / Assembly
REMOVE ADHESIVES, MASTIC, CUTBACK, ASPHALT, GLUE, ETC.
1. First remove the old flooring — tile, wood, carpet, glue-down, etc. Apply Oil-Flo
141 by spraying from a trigger sprayer, low-pressure tank-type sprayer or
compressed air paint spray cup. Or pour the Oil-Flo 141 onto the floor or mop
it on. For best results, brush in with a stiff broom or wire brush. Wait 5 to 30
minutes. Some thick materials may need a longer soak time.
2. Scrape up the softened material. A long-handled scraper with an angled blade
works best. Sometimes it is better to absorb the liquid with an absorbent such
as sawdust, oil-sorb, kitty litter, rags, or shredded newspaper.
3. Shovel or scrape waste material into bags or into plastic-lined cartons. If using
5-gallon pails of Oil-Flo, the empty pails (with lids removed) make convenient
waste receptacles.
4. Rinse or mop clean with water. You will probably need to reapply for complete
cleanup. Pick up water with a dustpan and brush, wet/dry vacuum, floor scrubber,
carpet extractor, etc.
REMOVE FLOORING GLUE FROM FINISHED FLOORING
1. Apply Oil-Flo 141 directly to the dried adhesive.
2. Agitate with a soft brush or rag.
3. Remove the softened material.
4. Using a cloth soaked with plain water to rinse dry. Depending
on the material, you can use a mop, rag, or extractor. Oil-Flo 141
needs the water to bond to so it can rinse away cleanly. You
don’t need a lot of water, just enough to make the quick bond.
REMOVE ADHESIVE LABELS, TAPE
You can remove markers, tape, self-adhesive labels, appliques
and stickers of all kinds. Just apply Oil-Flo 141 to the adhesive
and wait a few minutes. If you can pull off the vinyl face of the
tape or sticker, the Oil-Flo 141 will dissolve the adhesive quickly.
Otherwise you have to wait until the adhesive dissolves as the
Oil-Flo 141 migrates under the plastic label face. When you apply
Oil-Flo 141 to dried masking tape or paper labels, the Oil-Flo
141 will soak through to the adhesive. Give it time to work.
REMOVE CLOTHING STAINS
When you get tar, grease, oil or mastic on your clothes you can usually
clean this stain by pre-spotting and washing. Simply spray Oil-Flo 141
on the stain, rub the fabric together to dissolve the stain. Then toss it
in the washing machine. (If really heavy, apply Oil-Flo 141 and rinse
separately under running water first. Reapply Oil-Flo 141 and then
launder).
INSTRUCTIONS for OIL-FLO 141