Owner's Manual

62 TASCAM HS-2
Undoing the previous edit (UNDO)
You can undo the previous timeline edit.
1 Press the HOME key to display the Home Screen.
2 Touch the EDIT MODE button to enter the edit
mode.
3 Touch the EDIT button to display the pull-up menu.
4 Touch the UNDO button on the pull-up menu. When
the edit is undone, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the EDIT pull-up menu will remain open.
NOTE
•
The UNDO button on the Fade / Level pull-up menu
is also available to undo the edit.
•
If no editing has been conducted, the UNDO button is
disabled. The UNDO button appears with white letters
when it is possible to undo an edit.
•
The timeline mode can store up to 10 most recent
recording/editing operations. You can undo the editing
within the range of the edit records (UNDO) and can
redo the edit (REDO).
However, when the frequency of editing or the region
number increases, the number of operations that can
be stored may decrease.
•
The timeline mode edit history will be erased by the
following actions.
•
Turning off the power of this unit
•
Loading a project, session or AES31 edit information
•
Changing the operation mode
Redoing an edit (REDO)
After undoing an edit, you can redo it.
1 Press the HOME key to display the Home Screen.
2 Touch the EDIT MODE button to enter the edit
mode.
3 Touch the EDIT button to display the pull-up menu.
4 Touch the REDO button on the pull-up menu. When
the edit is redone, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the EDIT pull-up menu will remain open.
NOTE
•
The REDO button on the Fade / Level pull-up menu
is also available to redo the edit.
•
If no edit has been undone, the REDO button is
disabled. The REDO button appears with white letters
when it is possible to redo an edit.
•
The timeline mode can store up to 10 most recent
recording/editing operations. You can undo the editing
within the range of the edit records (UNDO) and can
redo the edit (REDO).
However, when the frequency of editing or the region
number increases, the number of operations that can
be stored may decrease.
•
The timeline mode edit history will be erased by the
following actions.
•
Turning off the power of this unit
•
Loading a project or session
•
Loading a project, session or AES31 edit information
•
Changing the operation mode
7–Timeline mode