Owner's Manual

TASCAM DR-V1HD

4 – Video/Audio Recording

Using the self-timer to delay recording

Use the self-timer to start recording a set amount of time after the RECORD

button is pressed.

1. Press the MENU button to open the

screen.

2. Use the Pointing Stick to select (highlight)

REC OPTION

and press

the center of the Pointing Stick to open the

REC OPTION

screen.

3. Press 5 and b to select SELF TIMER, and then press t or the center of

the Pointing Stick.

4. Press 5 and b to change the setting and then press the center of the

Pointing Stick.

Options: OFF (default), 2 sec, 10 sec.

5. When done changing the setting, press the F3/HOME button to return to

the Home Screen.

Capturing an image for audio file background

In audio mode, you can take (capture) a still photo when in recording standby

and use it as a background during recording/playback.

1. Press the RECORD button to put the unit into recording standby.

2. Focus the camera so that the image you want to shoot appears on

screen.

3. Press the F1( ) button (CAPTURE) to take the still photo.

The image captured is saved as a JPEG le with the same name of the

next audio le to be recorded, but with a “.jpg” extension.

4. The captured image is set as the Home Screen background.

5. You can press the F1( ) button (RECAPTURE) again to capture

a different image, if you want. The previously captured image is

overwritten.

NOTE

When the

BROWSE

screen is in thumbnail display mode, this image is also

used as the thumbnail.