SDS

ManualsBrandsTarco ManualsBuilding materialsTwo-Ply Super Jumbo Tex 60 Minute Water Resistive Barrier 40" x 48'6" (162 sq. ft.)

Safety Data Sheet – Asphalt Saturated Organic Felts Page 1 of 7

SAFETY DATA SHEET

SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION

MATERIAL NAME:

Asphalt Rolled Roofing

SDS NUMBER

101

PRODUCT DESCRIPTION:

Asphalt Saturated Organic Felt Underlayments

CHEMICAL FAMILY:

Mixture

PRODUCT USE:

Weatherproofing

TRADE NAME (S):

15# ASTM Specification Felt, Pro 15 Specification Felt, No. 15 Specification Felt, No. 15 Non-

Spec Felt, 30# ASTM Specification Felt, Pro 30 Specification Felt, No. 30 Specification Felt,

No. 30 Non-Spec Felt

MANUFACTURER:

Tarco

One Information Way

Suite 225

Little Rock, AR 72202

United States

www.tarcoroofing.com

tarco@tarcoroofing.com

TELEPHONE (TECHNICAL)

(800) 365-4506 (8:00 AM – 5:00 PM - US Central Time) Monday - Friday

TELEPHONE (EMERGENCY)

(800) 424-9300 (Chemtrec, in English)

SECTION 2 – HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:

Overview

All components listed for this product are bound within the product. When handled as intended

and under normal conditions of use, the product listed in this SDS is not expected to pose a

physical hazard or health risk to humans. This product does not contain any form of asbestos

materials.

Prevention

Avoid breathing dust.

Storage/Disposal

Dispose of content and/or container in accordance with local, regional, national, and/or

international regulations.

Route of Exposure

Inhalation, Skin, Eye, Ingestion

POTENTIAL HEALTH EFFECTS:

Inhalation

Not expected under normal conditions of use. However, extreme exposures to dust may cause

upper respiratory irritation.

Skin

Not expected under normal conditions of use. Repeated contact may cause skin irritation due

to roughness of product. Redness, drying and cracking of the skin (dermatitis) may occur

following prolonged and repeated contact. Prolonged or repeated skin contact could result in

absorption of hazardous components.

Ingestion

Not intended to be ingested (eaten). If ingested, it may cause temporary irritation to the

gastrointestinal (digestive) tract.

Eyes

Not expected under normal conditions of use. If dust enters eye, may cause irritation resulting

in tearing, stinging, redness or swelling.

Carcinogenicity

When used under normal conditions, this product is not considered a carcinogen.

Summary of content (7 pages)

PAGE 1
SAFETY DATA SHEET SECTION 1 – PRODUCT AND COMPANY IDENTIFICATION MATERIAL NAME: Asphalt Rolled Roofing SDS NUMBER 101 PRODUCT DESCRIPTION: Asphalt Saturated Organic Felt Underlayments CHEMICAL FAMILY: Mixture PRODUCT USE: Weatherproofing TRADE NAME (S): 15# ASTM Specification Felt, Pro 15 Specification Felt, No. 15 Specification Felt, No. 15 NonSpec Felt, 30# ASTM Specification Felt, Pro 30 Specification Felt, No. 30 Specification Felt, No.
PAGE 2
HAZARD RATING (NFPA) HAZARD RATING (HMIS®) HEALTH 1 HEALTH 1 FLAMMABILITY 1 FLAMMABILITY 1 REACTIVITY 0 PHYSICAL HAZARD 0 SPECIAL NOTICE - PERSONAL PROTECTION X NFPA – National Fire Protection Association HMIS® is a registered trademark of the American Coatings Association Degree of Hazard 0 - Minimal (Insignificant) 1 - Slight 2 - Moderate 3 - Serious (High) 4 - Severe (Extreme) SECTION 3 – COMPOSITION / INFORMATION ON INGREDIENTS CHEMICAL NAME COMMON NAME Asphalt Asphalt Flux Organi
PAGE 3
EXTINGUISHING MEDIA No data available HAZARDOUS COMBUSTIONCarbon Dioxide, Carbon Monoxide. If burned, the material could release toxic fumes and PRODUCTS smoke. FIRE FIGHTINGPROCEDURES Combustible. Avoid breathing fumes. Use extinguishing measures that are appropriate to local circumstances and surrounding environment. FIRE FIGHTER PROTECTION Firefighters should not enter confined space without wearing NIOSH-approved self-contained breathing apparatus with full face mask and protective equipment.
PAGE 4
SKIN/BODY PROTECTION OTHER PROTECTIVEEQUIPMENT WORK HYGIENEPRACTICES Normal work clothing (long sleeved shirts, long pants, and non-skid shoes or boots with 6-inch leather uppers) is recommended during application and/or tear-off activities. Should be provided as necessary to prevent irritation of the throat, eyes, and skin and to keep exposures below the applicable exposure limits identified in this section. Use good industrial hygiene practices when handling the material.
PAGE 5
SECTION 10 – STABILITY AND REACTIVITY THERMAL STABILITY HAZARDOUSDECOMPOSITION HAZARDOUSPOLYMERIZATION CONDITIONS TO AVOID Stable under normal conditions of use. Upon decomposition this product may form carbon dioxide, carbon monoxide, oxides of sulfur and various hydrocarbons during heating or burning. Will not occur. Keep this product away from heat, sparks, ignition sources, and open flames in accordance with applicable laws and regulations.
PAGE 6
SECTION 14 – TRANSPORT INFORMATION U. S. DEPARTMENT OF TRANSPORTATION Proper Shipping Name N/A Hazard Class N/A ID Number N/A Packing Group N/A Label Statement N/A Other N/A INTERNATIONAL TRANSPORT REGULATIONS: This product is not classified as dangerous goods according to international transport regulations.
PAGE 7
SECTION 16 – OTHER INFORMATION DATE OF PREPARATION August 01, 2014 DATE OF LAST REVISION N/A CHANGES SINCE LASTREVISION N/A PREPARED BY Tarco DISCLAIMER The information and recommendations contained herein are to the best of the manufacturer’s knowledge and belief, and are presented in good faith and believed to be accurate as of the effective date given. However, no warranty, expressed or implied, is given.