Installation Sheet

ALWAYS connect the nitrogen cylinder to a regulator in a dispensing 1.
system. Failure to do so could result in an explosion with possible death
or injury when the cylinder valve is opened.
NEVER connect the nitrogen cylinder directly to the product container. 2.
ALWAYS follow correct procedures when cylinders are changed. 3.
ALWAYS secure the cylinder in an upright position with a chain. 4.
NEVER drop or throw a nitrogen cylinder. 5.
ALWAYS keep a nitrogen cylinder away from heat. Store extra cylinders 6.
in a cool place (preferably 70ºF). Securely fasten with a chain in an
upright position when storing.
ALWAYS check the D.O.T. test date on the cylinder neck before 7.
installation. Ask your gas supplier for D.O.T. test requirements.
NEVER connect a product container unless there are two (2) safety's in 8.
the pressure system:
(a) one at or on the nitrogen regulator.
(b) one at or on the product coupler or in the pressure gas line.
NITROGEN
REGULATOR
Part No. 742N
WARNING WARNING
NITROGEN GAS CAN BE DANGEROUS NITROGEN GAS CAN BE DANGEROUS
THESE INSTRUCTIONS MUST BE GIVEN
TO THE END USER OF THE
NITROGEN REGULATORS
THESE INSTRUCTIONS MUST BE GIVEN
TO THE END USER OF THE
NITROGEN REGULATORS
WARNING: Nitrogen cylinders contain high-pressure gas which can be
hazardous if not handled properly. Make sure you READ
and UNDERSTAND the following procedures for nitrogen
cylinders BEFORE installation.
WARNING: Nitrogen cylinders contain high-pressure gas which can be
hazardous if not handled properly. Make sure you READ
and UNDERSTAND the following procedures for nitrogen
cylinders BEFORE installation.
IS 740-33-NIT
POSK10012 293
REV. E
IS 740-33-NIT
POSK10012 293
REV. E
ALWAYS connect the nitrogen cylinder to a regulator in a dispensing 1.
system. Failure to do so could result in an explosion with possible death
or injury when the cylinder valve is opened.
NEVER connect the nitrogen cylinder directly to the product container. 2.
ALWAYS follow correct procedures when cylinders are changed. 3.
ALWAYS secure the cylinder in an upright position with a chain. 4.
NEVER drop or throw a nitrogen cylinder. 5.
ALWAYS keep a nitrogen cylinder away from heat. Store extra cylinders 6.
in a cool place (preferably 70ºF). Securely fasten with a chain in an
upright position when storing.
ALWAYS check the D.O.T. test date on the cylinder neck before 7.
installation. Ask your gas supplier for D.O.T. test requirements.
NEVER connect a product container unless there are two (2) safety's in 8.
the pressure system:
(a) one at or on the nitrogen regulator.
(b) one at or on the product coupler or in the pressure gas line.
NITROGEN
REGULATOR
Part No. 742N