Webcam User Manual

28
VISION 5000 Videoconferencing SystemGeneral use
Press the
SELFVIEW
key to see your own picture (the outgoing video during a call).
If you have a single monitor system, the first button press provides you with your own picture (selfview) in
Picture-In-Picture. One more key press will provide you with your selfview in full screen size. The next press
will remove your selfview from the monitor.
Press the
PIP
MOVE
key to move the Picture-in-Picture to different corners of the screen.
Automatic selfview
To help you see your selfview when adjusting camera positions, your selfview will always appear in PIP when
you move your camera (if Auto-PIP is off, see Video Output in Advanced use)
If you have a dual monitor system, pressing the
SELFVIEW
key will toggle between your selfview and the last sent or
received still image on the dual monitor.
General use
Adjusting volume
Press the
VOLUME
keys to adjust the volume level. An on-screen indicator will show the current level.
Tip
It is important that you use the Volume control keys and not the monitor remote control. For best
performance set the volume level on the monitor initially using the dial-tone as a reference level and from
then on use only these volume keys. Too high a volume setting may result in echo being experienced by the
remote side of a video conference.
View outgoing video