Datasheet

ManualsBrandsTakachi ManualsEnclosuresHandheld Waterproof Enclosure WH 79x126x28mm Navy / Off-White ABS IP67

Available in 10 different color combinations.

High elasticity and good durability for maintaining waterprooﬁ ng capability.

Buit-in insert nut use for great long lasting water protection even after frequent opening and

closing.

Battery compartment is also waterproofed.

AA x 2, AA x 3, and AAA x 4 battery compartment types are available.

High waterproof performance with a silicone gasket

Elastic TPE grips provides for a more

secured hold.

Side grips are designed to be on the

sides and corners of the enclosure

to minimize drop impact.

Side grip provides great protection

IP67

WATERPROOF

HAND-HELD

ENCLOSURE

WH SERIES

Best suited for industrial measuring instrument, transceiver, controller, medical equipment and so on.

Please utilize a waterproof membrane keypad or membrane switch.

Note that the waterproof performance will be lost by drilling/milling holes or cutouts for buttons or switches on waterproof enclosures.

How to make waterproof buttons and switches

Please use a cable gland from our available range of cable gland accessories.

Refer to page 308 ~ 314 for more information.

How to make waterproof cable hole

●

IEC60529 standard is a system for classifying the degrees of protection provided by the enclosures of electrical

equipment, such as against dust and water.

IP6x : No ingress of dust; complete protection against contact (dust tight).

IPx7 : No ingress of water when submerged up to a depth of 1 meter for 30

minutes

IP67

APPLICATION EXAMPLE

Customization services available

E-mail:sales@takachi-el.co.jp

タカチ総合2016-英語版_ノーマル.indd 1-2 2016/10/17 9:54

Summary of content (26 pages)

PAGE 1
WH SERIES IP67 WATERPROOF HAND-HELD ENCLOSURE IP67 is ●IEC60529 standard is a system for classifying the degrees of protection provided by the enclosures of electrical equipment, such as against dust and water. IP6x : No ingress of dust; complete protection against contact (dust tight).
PAGE 2
APPLICATION EXAMPLE Best suited for industrial measuring instrument, transceiver, controller, medical equipment and so on. How to make waterproof buttons and switches Please utilize a waterproof membrane keypad or membrane switch. Note that the waterproof performance will be lost by drilling/milling holes or cutouts for buttons or switches on waterproof enclosures. How to make waterproof cable hole Please use a cable gland from our available range of cable gland accessories.
PAGE 3
WH SERIES IP67 HAND-HELD ENCLOSURE Technical Data 6 2 Protection class: IP67 Operating temperature: -10°C ~ +60°C Recommended torque: 0.2N • m ~ 0.3N • m (2kgf • cm ~ 3kgf • cm) 6 1 ■ Stylish and elegantly designed with chamfered edge construction. ■ IP67 class enclosure. 4 8 9 ■ Manufactured from flame-resistant ABS UL94V-0. 7 ■ 4 different internal compartment types are available: AAA x 4, AA x 3, AA x 2, and no battery type.
PAGE 4
Accessories (Optional parts) PCB mounting screw EM-2.
PAGE 5
WH dimensions ■ DXF/DWG/PDF drawings available on our website. WH125-20-N 5 Recessed area 6-Φ9 35 14 13 115.8 57 126 112.6 Red line TPE side grips 40 40 40 3 61.6 125 60 123 126 9 3 37 57 10 15 16.5 4 105.8 48 33.8 4- 7.5 Bottom cover (Internal) 6-M2.3 tapping boss Outer diameter = Φ4.8 48 R2 5 10 A Top cover (Internal) Depth = 0.3mm A-A 13 Blue line A Depth = 1mm Recessed area Silicone gasket 76 1 58.8 79 33.8 79 6-Φ8 13 WH125-20-F2 126 105.8 10 60.
PAGE 6
5 WH125-28-N Depth = 1mm Recessed area 58.8 14 57 37 61.1 40 115.8 125 112.6 Red line TPE side grips 40 40 40 3 6-M2.3 tapping boss Outer diameter = Φ4.8 10 13 10 60 123 3 48 33.8 126 R2 105.8 126 13 37 4 57 4 Bottom cover (Internal) 6-M2.3 tapping boss Outer diameter = Φ4.8 48 4- A 35 6-Φ9 15 16.5 5 18 Top cover (Internal) Depth = 0.3mm Recessed area A-A Blue line Silicone gasket 76 A 6-Φ8 79 21 79 58.8 79 14 60.4 57 37 4-M2.
PAGE 7
WH dimensions ■ DXF/DWG/PDF drawings available on our website. 20 WH145-20-N A-A Depth = 0.3mm Recessed area 2.6 7.5 35 15 17.5 A 4R2 13 49.6 5 3 139.7 123.8 146 3 8 Depth = 1mm Recessed area A 65.8 88 Top cover (Internal) 6-Outer diameter = Φ10 55 Bottom cover (Internal) 55 40.4 68.3 65 45 65 10 15 14 6-M2.3 tapping boss Outer diameter = Φ4.8 135.2 145 146 132.3 40 Blue line 50 50 10 143 69.6 Silicone gasket Red line TPE side grips 85 40.
PAGE 8
25 WH145-25-N A-A Depth = 0.3mm Recessed area 35 2.6 12.5 4R 2 18 49.4 15 17.5 A 5 5 3 139.7 146 123.8 3 8 Depth = 1mm Recessed area A 65.8 88 Bottom cover (Internal) 55 40.4 6-M2.3 tapping boss 55 Outer diameter = Φ4.8 6-M2.3 tapping boss Outer diameter = Φ4.8 10 Blue line 85 135.2 10 50 40 146 145 132.3 69.3 40 50 45 65 68.3 10 143 45 65 10 15 14 6-Outer diameter = Φ10 Top cover (Internal) 6-Outer diameter = Φ9 Silicone gasket Red line 40.
PAGE 9
WH dimensions ■ DXF/DWG/PDF drawings available on our website. 25 WH145-25-M3 18 Depth = 0.3mm Recessed area 5 21.1 5 3 35 15 17.5 12.5 A 4R2 A-A 49.4 3 67.8 146 123.8 2 8 Depth = 1mm Recessed area A 1.5 65.8 88 Top cover (Internal) 6-Outer diameter = Φ10 55 Bottom cover (Internal) 55 40.4 146 30 69.3 145 65 65 143 124.1 50 68.3 51.6 10 10 30 50 4-M2.3 tapping boss Outer diameter = Φ4.8 15 14 4-M2.3 tapping boss Outer diameter = Φ4.
PAGE 10
33 WH145-33-M2 A-A Recessed area 15 17.5 8- 5 5 16 3 3 123.8 2 146 35 R2 .4 R2 Depth = 0.3mm 20.5 36.1 A 26 4- 49.1 16 Depth = 1mm Recessed area A 67.8 65.8 9.5 88 Top cover (Internal) Bottom cover (Internal) 55 40.4 55 Outer diameter = Φ4.8 68.3 66.6 145 146 124.1 68.7 50 50 50 143 45 65 10 10 65 45 4-M2.3 tapping boss 15 6-M2.3 tapping boss Outer diameter = Φ4.
PAGE 11
WH dimensions ■ DXF/DWG/PDF drawings available on our website. 15 5 WH170-25-N Depth = 0.3mm Recessed area A 3 35 15 20.5 12.5 R 2 18 4- 5 A-A 3 171 145.6 8 5 5 A 1 69.6 95 Depth = 1mm Recessed area Top cover (Internal) 6-Outer diameter = Φ9 Bottom cover (Internal) 60 6-M2.3 tapping boss Outer diameter = Φ4.8 46.8 6-M2.3 tapping boss Outer diameter = Φ4.8 10 41 77.3 Red line TPE side grips 73 73 73 159.8 170 73 156 171 61 75.
PAGE 12
23 5 WH170-33-N 5 A-A 26 Depth = 0.3mm 20.5 5 5 3 145.6 3 171 35 Recessed area 15 20.5 A 16 Depth = 1mm 69.6 Recessed area A 1 95 Top cover (Internal) 6-Outer diameter = Φ9 Bottom cover (Internal) 60 46.8 6-M2.3 tapping boss Outer diameter = Φ4.8 76.7 73 159.8 170 171 156 73 Red line TPE side grips 73 Blue line 73 41 61 10 10 41 74.4 168 61 6-M2.3 tapping boss Outer diameter = Φ4.8 18 17 60 Silicone gasket 92 95 5 WH170-33-M4 5 Depth = 0.3mm 5 2 R 42.
PAGE 13
Accessories (Optional parts) EM SERIES PCB MOUNTING SCREW ■ Self-tapping screws for mounting PCB on bosses or standoffs. L ■ EM-3-6 self-tapping screws are suitable for mounting 1.6mm or thicker PCB. M Product no. / Dimensions Product no. M L Material Finish EM-1.6 1.6 4 Steel Trivalent chromate CSS • CS • PS • WC 50 EM-2 2 5 Steel Trivalent chromate TW • TWN • TWF • WP (M2 size) 50 EM-2.3 2.3 6 Steel Trivalent chromate LCT • LCS • LC • WH PF • PFF (M2.
PAGE 14
Accessories (Optional parts) TPS SERIES TAPPING STANDOFF ■ Tapping screw head allows for easy installation onto existing enclosure boss mount. ■ 4 different sizes available: M2, M2.3, M2.6 and M3 size. L b c a 4 ℓ ■ Material / Finish: Brass / Unfinished Product no. / Dimensions Product no. Screw size (a) Screw size (b) TPS-M2.3-4 M2.3 M2.3 c 5 L ℓ Pack of 4 3 4 4 TPS-M2.3-5 M2.3 M2.3 5 5 3 TPS-M2.3-6 M2.3 M2.3 5 6 4 4 TPS-M2.3-7 M2.3 M2.3 5 7 5 4 TPS-M2.3-8 M2.
PAGE 15
Accessories (Optional parts) WM SERIES SUSPENSION BRACKET How to install ■ Plastic wall mounting bracket. Easy attachment and removal. ■ Large and small brackets are available. ■ Applicable not only for the PF series, but also other plastic/metal enclosures with a panel thickness of 0.8 ~ 3.5mm. Technical Data ■ To attach the suspension hook onto the enclosure, hole milling is required. Max load : 2 kg - WM-1 5 kg - WM-2 ■ The max load values listed are static load values only.
PAGE 16
Accessories (Optional parts) NMG SERIES NEODYMIUM MAGNET Round magnet ■ Material / Finish: Neodymium / Nickel plated ■ Please attach using a strong adhesive. Φa Components a b Weight (g) NMG3-15N 15 3 4 NMG3-20N 20 3 7.1 NMG5-22N 22 5 11.4 NMG5-25N 25 5 18.4 b Product no. Round magnet with countersunk hole ■ Please fasten with a screw. Φa Φb Product no. a b c Countersunk size Weight (g) NMG3-15M3 15 3.2 3 M3 3.8 NMG3-20M3 20 3.2 3 M3 6.9 NMG5-22M4 22 4.
PAGE 17
RM SERIES POLYAMIDE CABLE GLAND 4 1 ■ Low cost cable glands made from polyamide material. ■ Wide selection, for M8 ~ M63, suitable for Φ1mm ~ Φ44 mm cable. ■ High oil resistant NBR rubber sealing and O-ring. RM dimensions L H 3 Components ■ PA = Polyamide No. ■ IP67 protection class.
PAGE 18
RMW SERIES WEATHERPROOF CABLE GLAND 4 5 ■ Weatherproof cable gland equipped with high ultraviolet and degradation resistant silicone sealing insert and O-ring. ■ Recommended to use outdoors where waterproofing is critical. Components No.
PAGE 19
RMW series silicone sealing insert weatherproof test report Object: Cut into a piece of the silicone sealing insert from RMW series and attach it onto an aluminium plate. For comparison, NBR sealing insert from our RM and EPDM sealing insert from another manufacturer is also attached for comparison purposes. Before Testing conditions After Equipment : Conditions : 7.5kW Super Xenon Weather Meter SX75 (Suga Test Instruments Co., Ltd.- http://www.sugatest.co.
PAGE 20
AG SERIES HIGH WATER PROTECTION CABLE GLAND ■ High water protection IP68 (1bar / 30min) polyamide cable gland. Technical Data ■ Wide selection, for M8 ~ M50, suitable for Φ2.5mm ~ Φ42 mm cable. Protection class: IP68 1bar / 30min Operating temperature: -20°C ~ +100°C Compliant with EN50262 Ver. A ■ Super tough and superior heat resistant PA6GF (glass fiber filled PA6) material on cap and connector. ■ Safer halogen free, eco-friedly product.
PAGE 21
■ No optional sealing washer is required when installing on an even surface because of the built-in waterproof rib. Waterproof rib ■ An optional sealing washer is required when installing on an uneven surface. (See website for more information on the optional sealing washer) Sealing washer AG dimensions L H SW A d G m ■ DXF/DWG/PDF drawings available on our website. ■ Lock nut is not included for M8 and M10 sizes. Please drill a proper thread hole into the enclosure for installation.
PAGE 22
DIGITAL PRINTED OVERLAY ● 3 reasons for low initial costs Cutting process Avoiding the cost for cutting die manufacturing via our in-house cutting plotter. Printing process Saving the cost for print plates via utilization of our in-house digital inkjet printer. Embossing process Reducing the cost for the embossing die via our new die manufacturing process.
PAGE 23
PRODUCTION PROCESS 1. Inkjet printing on ﬁlm 2. Laminating 3. Cutting double-sided tape 4. Sticking double-sided tape on printed ﬁlm 5. Cutting the sheet to size 6. Embossing 7. Machining on enclosure 8. Sticking overlay sheet onto enclosure 9.
PAGE 24
INKJET PRINTING Full color digitally designed image can be printed in 1 run. No cost difference regardless of the number of colors used. Inkjet printing Full color in 1 run Silk-screen printing Ink Mixing Print Drying Repeat procedures x number of colors.
PAGE 25
High quality printing of photo image and color gradation. Print photo images in maximum 1,800 x 1,800 dpi quality. Pictures, logos and unique designs with color gradation can be recreated in a high quality print. Maximum printable enclosure size D W H 420mm 594mm 270mm H D W Printable on surfaces with height differential Printing is possible on recessed, sloped and rounded sections. Printed example Gap difference is less than 2.0mm. Printing surface Less than 2.
PAGE 26
CNC MACHINING CNC milling is a form of computer controlled machining. Similar in operation to drilling and cutting, it is able to create various hole styles and shapes by using a rotating cutting tool to bore into the object. Extruded aluminium ・Mainly used for plastic, aluminium die-cast, and aluminium extrusion material types. ・Able to perform milling for various shapes and sizes. ・Recommended for small quantity customization.