User's Manual

6
Part Names and Functions
Headset
A
Camera
Captures images and movies. Remove the protective lm before
using the camera. You can adjust the direction of the camera
vertically.
B
Camera indicator
Flashes while the camera is operating.
C
Light sensor
Senses the brightness of your surroundings and automatically
adjusts the brightness of the screen.
D
Head pad
Fits against your forehead when wearing the headset. The head
pad is equipped with a built-in sensor to detect the position
and direction of the product.
E
Lens
Displays images. When you are not viewing images, you can
slide up the lens to the head pad.
➡
“Viewing Images Using the Headset” p. 12
F
Lens justier
You can adjust the position of the lens vertically. Make sure the
lens is level when adjusting.
G
Head band
Secures the headset on to your head. You can adjust the length
to t the size of your head (head circumference: 560 to 640
mm).
H
Cable securer
Secures cables when wearing the headset.
I
Screw holes to secure the shade/protective shield/
lens holder
Install the shade/protective shield using the exterior screw
holes. Install the lens holder using the interior screw holes.
➡
“Installing the Shade/Protective Shield/Lens Holder” p. 9
J
Inner pad (B)
If the headset feels tight, replace this with inner pad A or C. The
headset feels loose if you attach a smaller inner pad.
➡
“Replacing the Inner Pad” p. 9