User's Manual



Figure3.3



4. Pairing(FORTECHNICIANSUSEONLY)

4.1 PlugthePowerAdaptertoDW‐25R,andthenturnthepoweron.

4.2 InstallbatteriesinDW‐25T,andthenturnthepoweron.

4.3 PresstheResetButtonontheReceiver,andthecorrespondingLEDwillblink.

4.4 PresstheResetButtonontheDW‐25T,andtheMicrophoneLEDwillblink.

4.5 The Microphone LED and Receiver A channel or B channel LED will blink

simultaneously, it indicates the auto pairing is activated by the program. The

pairing process takes about 10‐20 seconds, and then the LED on the paired

productswilllightupcontinuingly,itindicatesthepairingprocessiscompleted.

4.6 Ifthepairingprocessfailed,pleaserepeat4.3‐4.4,andspeeduptheprocess.



5. Troubleshooting：

5.1 WirelessReceivercannotbepoweredon:checkifthepowertotheReceiveriswell

connected.

5.2 ThestatusLEDonWirelessMicrophonenotlightupwhenpowerison:checkifthe

batteriesareproperlyinstalled orhaveenoughenergy.

5.3 ThestatusLEDonWirelessMicrophonekeepsblinking:Checkifthebatterieshave

enoughenergy,oriftheReceiverispoweredon.

5.4 No sound:

 Check if the volume is set too low, or if the sound cable is well

connected.

5.5 ThemaximumeffectivedistancebetweentheDigitalWirelessMicrophoneandthe

DigitalWirelessReceiveris30M(whentheDistanceSwitchissetat“long”),sothe

outputaudiomightbeinconsistentwhenbeyondtheeffectiverange.



6. Specification：

6.1 DigitalWirelessReceiver：

 Model：DW‐25R

PowerConsumption：7.5W(MAX)

Long

Short

Medium