User's Manual

12
4.3.System setup
Any combination of the air unit and the ground unit can setup communication.
Choose different combinations according to different application scenarios.
5. Software Program
5.1.Transmission board
Tranmission board needs to program baseband and MCU1 firmware.
Tranmission board can be programed for air unit or ground unit.
5.2.Interface board
MB_LAN board can be programed for air unit or ground unit.
MB_HDMI-IN board can only be programed for air unit.
MB_HDMI&USB-OUT board can only be programed for ground unit.
Federal Communications Commission (FCC) Interference
Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.