User Manual

Fast Tagging Station User's Guide
7. Fast Tagging Station Demo
Software
5.1 Purpose of the Fast Tagging Station Demo software
TAGSYS provides demonstration software to illustrate the tagging operation sequence. It
writes into the tag all the permanent data defined in the ISO Library Mapping Software
Guide.
It shows the differences of memory mapping between the Folio20 and the Folio320 and the
Folio370.
Please refer to ISO Library Mapping Software Guide for more information.
To install the demonstration software,
 Launch Setup.exe and follow on the displayed instructions.
7.2 Recommended algorithm
We recommend to develop a software using the ISO Library SDK (available on
www.tagsysrfid.com, partner section with username and password).
Please refer to ISO Library SDK documentation for more information.
7.2.1 Cataloguing operation
This operation does not involve RFID manipulations and can be integrated in the Figure 6:
Converting Operation FlowChart.
In this operation you collect all the information to be written into the tag’s memory that is the
permanent data (barcode, location, etc …).
Carry on this operation by manual entry using a software or a database access.
Prepare data to write into the tag
Fill the object item from the class
LIBTSMAPXLib.LibTSMapItem. Set the permanent data :
• Barcode
• Location
• Type
• Referenced
• Order
• Number of items
(See Folio220 limitations in ISO Library Mapping
Software) using manual entries or database access
22/27 Revision 2.1 October 2007