Quick Start Guide

[phone]
VIEWING EDITING & SHARING
4. Open the Tactacam App and connect your Tactacam.
Android users: You will need to download a video player for your device.
We recommend MX Media player you can nd it in the Android app store.
5. Turn Wi-Fi Off - Press and hold the Wi-Fi/Mode button for 3 seconds.
(Solo WiFi hold the Power Record Button for 3 seconds.) This will turn off
your Wi-Fi and disconnect you from your mobile device. Note: Buttons on your
Tactacam will not work when connected to WiFi
Date Time - Automatic
1. Your camera’s date and time are automatically set when you
connect your camera to the Tactacam App. Your Tactacam will also
install a Text le on your SD Card that will allow you to manually set
the date and time, if needed.
Date/Time - Manual
Your Tactacam will install a Text le on your SD Card. This Text le will
allow you to set the date and time.
1. Simply connect your Tactacam to your computer with the
supplied USB cord and open up the text le located on the SD Card.
2. Adjust the time and date on the text le. Save and close the le.
3. Eject your camera from the computer.
4. Remove your camera from the USB cord to apply the time and
date settings.
See video tutorials at tactacam.com/support
TACTACAM APP - DATE/TIME