Installation Sheet

ManualsBrandsT and S Brass ManualsfaucetsT and S Brass 1.42 GPM Spray Valve with 44" Flexible Stainless Steel Hose and Adapter

PRE-RINSE SPRAY VALVE

Limited One Year Warranty

(Commercial Applications)

T&S warrants to the original purchaser (other

than for purposes of resale) that such product is

free from defects in material and workmanship for

a period of one (1) year from the date of purchase.

During this one-year warranty period, if the product

is found to be defective, T&S shall, at its options,

repair and/or replace it. To obtain warranty service,

products must be returned to...

T&S Brass and Bronze Works, Inc.

Attn: Warranty Repair Department

2 Saddleback Cove

Travelers Rest, SC 29690

Shipping, freight, insurance, and other

transportation charges of the product to T&S and

the return of repaired or replaced product to the

purchaser are the responsibility of the purchaser.

Repair and/or replacement shall be made within

a reasonable time after receipt by T&S of the

returned product. This warranty does not cover

Items which have received secondary ﬁ nishing or

have been altered or modiﬁ ed after purchase, or

for defects caused by physical abuse to or misuse

of the product, or shipment of the products.

Any express warranty not provided herein, and

any remedy for Breach of Contract which might

arise, is hereby excluded and disclaimed. Any

implied warranties of merchantability or ﬁ tness

for a particular purpose are limited to one year in

duration. Under no circumstances shall T&S be

liable for loss of use or any special consequential

costs, expenses or damages.

Some states do not allow limitations on how

long and implied warranty lasts or the exclusion or

limitation of incidental or consequential damages,

so the above limitations or exclusions may not

apply to you. Speciﬁ c rights under this warranty

and other rights vary from state to state.

Attention California Residents:

WARNING This product can expose

you to chemicals including Lead, Chromium

(hexavalent compounds) and Phthalates

(DEHP) which are known to the State of

California to cause cancer and birth defects or

other reproductive harm.

For more information go to

www.P65Warnings.ca.gov.

P/N: 098-011027-45 Rev.12

Date: 10-09-19

Drawn: TED

Checked: JRM 11-11-19

Approved: JHB 02-14-20

Installation and

Maintenance

Instructions

B-0107

B-0107-035

B-0107-090

B-0107-C

B-0107-C35

B-0107-C90

B-0107-J

B-0107-J90

EB-0107

EB-0107-C

EB-0107-C35

EB-0107-J

EB-10K

EB-10K-C

EB-10K-J

B-10K

B-10K-C

B-10K-J

Español:

Instrucciones de instalación y mantenimiento

Français:

Instructions pour l’installation et la maintenance

Deutsch:

Installations- und Wartungsanleitungen

Italiano:

Istruzioni di installazione e manutenzione

中文:

安装与维护说明

Summary of content (9 pages)

PAGE 1
Limited One Year Warranty (Commercial Applications) T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from the date of purchase. During this one-year warranty period, if the product is found to be defective, T&S shall, at its options, repair and/or replace it. To obtain warranty service, products must be returned to...
PAGE 2
Exploded View Model Flow (gpm) [L/min] Force (ozf) [N] B-0107-C 0.65 [2.5] 4.4 [1.2] B-0107-C35 0.65 [2.5] 4.4 [1.2] Model Flow (gpm) [L/min] Force (ozf) [N] B-0107-J 1.07 [4.1] 7.2 [2.0] B-0107-J90 1.07 [4.1] 7.2 [2.0] B-10K-J 1.07 [4.1] 7.2 [2.0] EB-0107-J 1.07 [4.1] 7.2 [2.0] EB-10K-J 1.15 [4.4] 7.5 [2.1] B-0107 1.15 [4.4] 7.5 [2.1] B-0107-035 1.15 [4.4] 7.5 [2.1] B-0107-090 1.15 [4.4] 7.5 [2.1] B-10K 1.15 [4.4] 7.5 [2.1] 5.60 [21.2] 8.3 [2.3] B-0107-C90 0.
PAGE 3
Grey Part Number Guide PARTS KIT 1,2,3 PARTS FOR ANY GREY T&S SPRAY VALVE 1 2 3 4 5 6 Ring, Hold Down #27 Washer Body, Spray Valve Grey Handle Nut, Handle Screw, Handle 000907-45 010476-45 000065-40 001120-45 003198-45 003199-45 PARTS FOR ANY GREY BONNET ASSEMBLY 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 12 13 14 15 16 17 18 19 20 21 Bonnet Assembly Stem Washer, Seat Washer, Bonnet Binding Bonnet Washer, Bonnet Brass Stem, Packing Spring, Bonnet Push Button Grease Pack 002856-40 009306-20 012915-45 0
PAGE 4
Blue Part Number Guide PARTS KIT 4,5,6,7 PARTS FOR ANY BLUE T&S SPRAY VALVE 1 2 3 4 5 6 Ring, Hold Down #27 Washer Body, Spray Valve Blue Handle Nut, Handle Screw, Handle 000907-45 010476-45 000065-40 011454-45 003198-45 003199-45 PARTS FOR ANY BLUE BONNET ASSEMBLY 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 4,5,6,7 12 13 14 15 16 17 18 19 20 21 Bonnet Assembly Stem Washer, Seat Washer, Bonnet Binding Bonnet Washer, Bonnet Brass Quad Seal Spring, Bonnet Push Button Grease Pack 010594-40 009306-20
PAGE 5
EN To replace worn parts: 1. Shut off water supply and drain lines. For ease of disassembly and reassembly, the handle grip can be removed from no.3. 20 16 13 4 3 2. Unscrew no.5 and no.6 to remove no.4. Unscrew and remove no.16 from no.3. 3. Hold no.20 with pliers in one hand, and with screwdriver, carefully unscrew no.13 from no.16. 4. Apply no.21 over smooth portion of no.13. Replace no.14, no.15, no.17, no.18 & no.19 with new parts. Dab no.21 onto valve side of no.19 before replacing. 5.
PAGE 6
4. Aplique el n.° 21 sobre una parte del n.° 13. Reemplace los números 14, 15, 17, 18 y 19 con partes nuevas. Golpee ligeramente el n.° 21 por el lado de la válvula del n.° 19 antes de reemplazarlo. 5. Vuela a armar el n.° 16 insertando el n.° 13 por todas las partes. Sostenga el n.° 20 con pinzas y atornille cuidadosamente el n.° 13 dentro del n.° 20 hasta que el tornillo quede ajustado. No aplique fuerza excesiva. 6. Vuelva a insertar el n.° 16 dentro del n.° 3 y ajuste firmemente. 7.
PAGE 7
DE Verschleißteile ersetzen: 1. Wasserzufuhr ausschalten und Rohre entleeren. Zum leichten Aus- und Einbau kann der Handgriff von Nr. 3 entfernt werden. 2. Nr. 5 und Nr. 6 abschrauben, um Nr. 4 zu entfernen. Nr. 16 aufschrauben und von Nr. 3 entfernen. 3. Nr. 20 mit der Zange in einer Hand halten und mit dem Schraubenzieher vorsichtig Nr.13 von Nr. 16 abschrauben. 4. Nr. 21 auf dem glatten Teil von Nr. 13 anbringen. Nr. 14, Nr.15, Nr. 17, Nr.18 & Nr.19 durch neue Teile ersetzen. Nr.
PAGE 8
11. SOLO per EB-0107-C, EB-0107-J, B-0107-C E B-0107-J: Per sostituire il n. 23, fare scorrere il n. 23 dal n. 25, e fare scorrere nuovamente un nuovo n. 23 nel n. 25. Il n. 23 scatterà nella scanalatura del n. 25. Vedere la Figura B. * Verificare che la portata sul n. 23 corrisponda al puntale a spruzzo all’interno del n. 25. Attenzione: disattivare la fornitura idrica al rubinetto della base quando non è in uso. CN 更换磨损件: 1. 关闭供水及下水管道，为了便于拆卸和重新组装，可先将手把从3号上拆卸下来。 2. 拧下5号和6号以便拆下4号。从3号上拧下16号。 3.
PAGE 9
RELATED T&S BRASS PRODUCT LINE B-0108 JeTSpray Spray Valve B-0108-C JeTSpray Low Flow Spray Valve T&S BRASS AND BRONZE WORKS, INC. A firm commitment to application-engineered plumbing products 2 Saddleback Cove, P.O. Box 1088, Travelers Rest, SC 29690 Phone: (864) 834-4102 Fax: (864) 834-3518 E-mail: tsbrass@tsbrass.