User's Manual Part 3
Flight
54
©
2016 DJI. All Rights Reserved.
Phantom 4 Pro/Pro+ User Manual
If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move your
aircraft to a different location and try again.
$BMJCSBUFUIFDPNQBTTCFGPSFFBDInJHIU-BVODIUIF%+*(0BQQBOEGPMMPXUIFPOTDSFFO
instructions to calibrate the compass. DO NOT calibrate the compass near metal objects such
as a metal bridge, cars, scaffolding.
If the aircraft status indicators is blinking red and yellow alternately after placing the aircraft on
the ground, the compass has detected magnetic interference. Change your location.
When to Recalibrate
1.When compass data is abnormal and the Aircraft Status Indicator is blinking green and yellow.
8IFOnZJOHJOBOFXMPDBUJPOPSJOBMPDBUJPOUIBUJTEJGGFSFOUGSPNUIFNPTUSFDFOUnJHIU
3.When the mechanical or physical structure of the Phantom 4 Pro / Pro+ has been changed.
8IFOTFWFSFESJGUJOHPDDVSTJOnJHIUJF1IBOUPN1SP1SPEPFTOPUnZJOTUSBJHIUMJOF
Auto Takeoff and Auto Landing
Auto Takeoff
Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to use the
auto takeoff feature:
1. Launch the DJI GO app, and enter “Camera” page.
$PNQMFUFBMMTUFQTPOUIFQSFnJHIUDIFDLMJTU
3. Tap“
wBOEDPOmSNUIBUDPOEJUJPOTBSFTBGFGPSnJHIU4MJEFUIFJDPOUPDPOmSNBOEUBLFPGG
4. Aircraft takes off and hovers at (1.2 meters) above ground.
Aircraft Status Indicator blinks rapidly when it is using the Vision Position System for stabilization.
The aircraft will automatically hover below 3 meters. It is recommended to wait until there is
TVGmDJFOU(14MPDLCFGPSFVTJOHUIF"VUP5BLFPGGGFBUVSF
4. Re-calibrate the aircraft if the aircraft status indicators blink red.
Auto-Landing
Use auto-landing only if the Aircraft Status Indicators are blinking green. Follow the steps below to use
the auto-landing feature:
1. Check the landing area condition before tapping “
w4MJEFUIFJDPOUPDPOmSNMBOEJOH5IFOGPMMPX
the on-screen instructions.