IOM SYSCREW 440 1550 WATER EVO

18
4 - Installation (continued)
4.7 Connection of water temperature sensors
(on shell and tube condenser/s)
Hydraulic connections between condenser/s and plant are supplied
separately and must be installed during the installation of the unit.
Inlet / outlet water temperature probes should be placed inside
dedicated water probes pockets to be provided over the installation.
Kit manifold accessory (offered as an option for units equipped with
two compressors) is already including water probes pockets.
BT OUT
CONNECTION STANDARD
BT INGRESSO
CONNECTION WITH MANIFOLD KIT
BT IN