TS SYSCREW 300 1400 AIR GB 0617
Table Of Contents
- Tender Specification
- USERIESU: SyScrew 300-1400 Air CO
- UTYPEU: Air cooled water chiller
- UTECHNOLOGYU: screw compressors, R134a refrigerant
- UCAPACITY RANGEU:
- Cooling ( 295-1395 [kW]
- General description
- 1 Key points
- 2 Cabinet
- 3 Compressors
- 4 Evaporator
- 5 Condenser
- 6 Condenser fans
- 7 Refrigerant circuit
- 8 Control panel
- 9 Safety and control devices
- 10 Optional hydro kits
- 11 Factory installed options
- 12 Field installed accessories
- 13 Conformity with standards
Tender Specification
SyScrew 300-1400 Air CO
To increase its application field, SyScrew Air range is available in two additional
versions:
• HT (High Temperature) version: same equipment as the basic version, but
also fitted with brushless EC fan motors to ensure low energy
consumption and to operate on a wider envelope
• HPF (High Pressure Fans) version: same equipment as the basic version,
but also fitted with brushless EC fan motors so as to provide external
static pressure up to 120 [Pa]
Two heat recovery options are available:
• Desuperheater: plate type heat exchangers fitted on the compressor
discharge line, to recover about 20 % of the total heat rejected to the
condensers
• Total Heat Recover (TR version): double circuit shell& tube or plate type
heat exchanger to recover the total heat rejected to the condensers. 4-
way valves and field installed control sensor are also provided to ensure
the cooling/heat recovery mode changeover
Several hydraulic options are available in order to cover a wide range of
requirements in terms of pump available static pressure and redundancy
The general operation status of the unit is steadily managed by a
microprocessor implementing a dedicated developed software, ensuring a total
protection of compressor inside its operating envelope and including parameter
customization according application field