IOM SYSAQUA 45 125 (IOM AQA 05 N 3GB)
Table Of Contents
- CONTENTS
- 1. GENERAL RECOMMENDATIONS
- 2. INSPECTION AND STORAGE
- 3. WARRANTY
- 4. PRESENTATION
- 5. CONTENTS OF PACKAGE
- 6. DIMENSIONS
- 7. HANDLING
- 8. TECHNICAL SPECIFICATIONS
- 9. INSTALLATION
- 10. HYDRAULIC LINKS
- 11. WIRING DIAGRAM AND LEGEND
- 12. ELECTRICAL CONNECTIONS
- 13. REGULATION
- 13.1. ORDER OF PRIORITY FOR CONTROL SYSTEMS
- 13.2. USER INTERFACE
- 13.3. INITIAL SETTINGS
- 13.4. LAUNCHING THE SYSAQUA SYSTEM
- 13.4.1. CONFIGURING INPUT D1
- 13.4.2. CONFIGURING INPUT D2
- 13.4.3. HEAT/COOL SELECTION
- 13.4.4. SELECTING THE OPERATING MODE
- 13.4.5. USER TEMPERATURE SETPOINTS AND ACTUAL SETPOINTS
- 13.4.6. WATER LAW
- 13.4.7. "VARIABLE PRIMARY FLOW” OPTION
- 13.4.8. ELECTRIC HEATING OPTION
- 13.4.9. REDUCED MODE
- 13.4.10. LIMITED CAPACITY
- 13.5. ALARMS
- 13.6. SCHEDULE
- 14. COMMISSIONING
- 15. IN CASE OF WARRANTY - MATERIAL RETURN PROCEDURE
- 16. ORDERING SERVICE AND SPARE PARTS ORDER
- 17. MAINTENANCE
- 18. TROUBLE SHOOTING
- DIMENSIONS
- REFRIGERANT CIRCUIT DIAGRAM
- HYDRAULIC CIRCUIT DIAGRAM
- PRESSURE LOSSES OF THE PLATE HEAT EXCHANGER
- HYDRAULIC PUMPS CURVES
- WIRING DIAGRAM
- DIMENSIONS
- SCHEMA DU CIRCUIT FRIGORIFIQUE
- SCHEMA DU CIRCUIT HYDRAULIQUE
- PERTE DE CHARGE DE L'ECHANGEUR A PLAQUES
- COURBES DES POMPES HYDRAULIQUES
- SCHEMAS ELECTRIQUES
- ABMESSUNGEN
- KÄLTEKREISLAUFDIAGRAMM
- HYDRAULISCHER SCHALTPLAN
- DRUCKVERLUST PLATTENWÄRMETAUSCHER
- KURVEN VON HYDRAULIKPUMPEN
- STROMLAUFPLANS
- DIMENSIONI
- SCHEMA DEL CIRCUITO REFRIGERANTE
- SCHEMA CIRCUITALE IDRAULICO
- PERDITA DI CARICO SCAMBIATORE A PIASTRE
- CURVE DELLE POMPE IDRAULICHE
- SCHEMA ELETRICO
- DIMENSIONES
- ESQUEMA DEL CIRCUITO FRIGORIFÍCO
- ESQUEMA CIRCULAR HIDRÁULICO
- PÉRDIDA DE CARGA INTERCAMBIADOR DE PLACAS
- CURVAS BOMBAS HIDRÁULICAS
- ESQUEMA ELECTRICO
English
When handling the SYSAQUA, beware not to damage the nned coil block. Protect it with cardboard
or particle panels.
Caution
Slings must never touch the unit casing of SYSAQUA.
Caution
7SYSAQUA
7.3.1. HANDLING WITH A FORKLIFT
When a forklift is used to handle the
SYSAQUA 45/55/65/75/90/105/125 units, lift
them only along their width.
Place a safety wedge between the unit base and
the fork lift truck to avoid damaging the unit’s
structure and casing.
7.3.2. HANDLING BY SLINGING
Lifting is also possible by slinging.
Holes implemented at each end of the unit allow inserting slinging bars along the chassis width.
A spreader must be used to prevent damage to the machine edges.
SYSAQUA 45/55/65/75/90/105/125 SYSAQUA 45/55/65/75/90/105/125
WITH BUFFER TANK
45 55 65 75 90 105 125
Hole diameter mm
47 47 47 47 47 47 47