IMO DVG

Transport, storage
DVG 16.08.2021 7
4 Transport, storage
4.1 Transport
Each fan leaves our plant in an electrically and mechanically proper condition. The fans are delivered in wooden crates
or cardboard boxes. We recommend transporting the fans to the installation site in original packaging.
WARNING
Hazard of impact if the fan falls down!
 Load and unload the fan carefully in order to avoid possible damage.
 Pay attention to the weight and dimensions of the packaging. The weight of the fan is visible from the
nameplate.
CAUTION
Danger from cutting edges!
 Wear protective working gloves when unpacking.
Check the fan for obvious defects, which can impair safe operation .
First of all, pay attention for defects on the connection cable, service switch and impeller, cracks in the housing,
missing rivets, screws or covering caps.
WARNING
Electrical hazard from damaged connection cable or connections
 Do not use the connection cable, service switch or impeller for transport or hoisting.
WARNING
Hazard of impact if the device falls down!
 Transport the device carefully and with appropriate hoisting device!
 Wear a safety helmet and safety goggles!
Only put the fan at unpacking on its base plate.
At manual transport observe allowed human lifting respectively carrying forces (see weight on the name plate).
Avoid impacts and distortion of the base plate and other parts of housing.
4.2 Storage
CAUTION
Hazard due to loss of function of the motor bearings!
 Avoid storing for too long time (recommendation: max. 1 year).
 Turn the impeller manually every three months, wear protective working gloves.
 Before installation, check proper function of the motor bearings
Store the fan in the original packaging dustproof, dry and protected against weather.
Avoid effects of extreme heat or cold.