UserManual S SA2 S SA2L202010
Table Of Contents
- Table of Contents
- Introduction
- Warnings
- Operating Conditions
- Installation
- Installation Methods
- Opening Preparation for S-SA2 Installation
- Standard Distances Between Damper Bodies
-  Installation into a Soft Crossing (up to Size 1000 × 800 mm)
- Connecting S-SA2 to “multi” Ductwork Made of Boards
- S-SA2L Installation
-  Installation on the Vertical Duct with a Ledge
-  Installation Directly on the Horizontal Duct
- Electrical Connections
- Operation Manual
- Smoke Damper Functionality Check
- Smoke Damper Inspection
- Warranty Conditions
- Operating Journal
- Warranty Service
S-SA2
8/40 | User Manual S-SA2 & S-SA2L | 201905
Opening Preparation for S-SA2 Installation
The S-SA2 smoke damper can be installed in a wall or ceiling between zones classied as “multi-multi”,
“multi-single” and “single-multi”.
Opening Preparation for a Rigid Wall
Fig. 1: Rigid wall/ceiling with a rectangular opening
NOTE: Dimensions W
1
and H
1
are dened in every installation
Tab. 3: Thickness of tested wall
Fire Resistivity
Minimum s (mm)
Wall Ceiling
Concrete/Masonry/Cellular Concrete
90
150 ± 10
120
Legend
1 Concrete/Masonry/Cellular Concrete
s
1
W
1
H
1