KBOX CONNECTIONBOX VER3

ManualsBrandsSystemair ManualsFire SafetyKBOXU - Connection box w/o test button

Table Of Contents

CONNECTION BOX
Disposal of old Electrical & Electronic Equipment (Applicable throughout the European Union and other European countries with separate collection programs)

08/01/2014

___________________________________________________________________

ON Control AB, Hjortstigen 5, 507 70 GÅNGHESTER. Sweden

Telephone: +46 33 25 65 70, Mobile: +46 70 625 86 00, Fax: +46 33 25 69 20 Page1

Beskrivning kopplingsbox eng ver3.doc

CONNECTION

BOX

Description

The connection box is used to connect Belimo

or other actuators of equal types to 4-wire

control and monitoring equipment, for

example JK200, JK800, KSUB, SUSB, SEHA,

SEHA-M, etc. It is also easy to use the

connection box to create so-called parallel

connections. The box is available with or

without a test button to operate dampers

manually.

General

• Easy connection of actuator to control and

monitoring unit

• Pushbutton to test dampers

• Easy ”parallel connection”

• Replaces the required connection point

with a box between the actuator and the

control and monitoring unit

• All cabling by 4 wire

Installation

Designed for wall installation.

Supply voltage

Designed for 24V.

Protection class

IP54.

Ambient temperature

Max +70°C, min -30°C.

Dimensions

82*82*39 mm. (w*h*d)

Function of jumpers

The function of the jumpers is to connect the

limit switches in the actuator to the next

actuator in the context of "parallel

connection". The jumpers should therefore be

removed from the first connection box. See the

diagram below. If there are more than two

parallel connections, the jumpers should only

be present in the last connection box.

Faultfinding parallel connection.

With the jumpers it is easy to find a faulty

damper. If the control panel indicates damper

not open set jumpers ON in the first KBOX. Is

indication OK? If yes the last damper is the

faulty one.

Ex. 2 actuators

in “parallel” connection

KBOX

Damper

actuator

KBOX

Damper

actuator

653

Jumpers ON

Jumpers OFF

Wht

Blk

Wht

Blk

1 2

1 2 3 4

Summary of content (2 pages)

PAGE 1
08/01/2014 Ambient temperature CONNECTION BOX Description The connection box is used to connect Belimo or other actuators of equal types to 4-wire control and monitoring equipment, for example JK200, JK800, KSUB, SUSB, SEHA, SEHA-M, etc. It is also easy to use the connection box to create so-called parallel connections. The box is available with or without a test button to operate dampers manually. Max +70°C, min -30°C. Dimensions 82*82*39 mm.
PAGE 2
08/01/2014 Disposal of old Electrical & Electronic Equipment (Applicable throughout the European Union and other European countries with separate collection programs) This symbol, found on your product or on its packaging, indicates that this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection point for the recycling of electrical and electronic equipment.