Manual IHMC6 3

IHMC6-3
11
SYSTEM PARTS
HMI
The HMI allows the user to control up to 9
individual BHC4002-ER units either via the push
buttons on the HMI or via the Remote Handset
and depending on selected configuration control
the outputs by varying the settings from 1 to 10.
All together you can preset 6 individual outputs
with a maximum rating of 36kW dependant on
configuration. The HMI can switch off all the
outputs together or on an individual basis. When
the units are switched back on they resume the
setting previously set.
The power unit
The IHMC6-3 is designed to accept a 230V one
phase supply. The unit has a 2 stage supply filter
to meet EMC legislation and comes in an IP65
rated enclosure complete with glands. A 4 core
low voltage cable is required to wire the Power
unit to the HMI allow it to be mounted neatly
away from the main installation
The Interface unit is designed to be used with the
Remote handset, however you can also control all
the heaters directly from this unit.
Channel Indicator
This indicates which channel you are controlling.
The maximum number of channels available are
9.
Power Indicator
This indicates the power output
CH OFF
This allows you to switch off an individual
channels
ALL ON/OFF
This allows you to switch the output off to all the
channels