Manual IHMC6 3

IHMC6-3
8
INSTALLATION AND OPERATING INSTRUCTIONS
SPECIFICATIONS
Mains Voltage 400Vac +/- 10% 50 Hz
Max load at 20°C ambient 6 kW (Total)
Number of Channels 3 x 2kW Max
Power Consumption 50mA
IP Rating Power Unit IP65
IP Rating HMI IP65
Gland Diameter Max Cable Entry 2.5mm²
Operating Temperature -20°C to 30°C
Max Unit Operating Temperature 65°C
Dimensions Power Unit W=280mm D=200mm H=80mm
‘D’ inclusive of Glands
Dimensions HMI Unit W=118mm D=110mm H=50mm
HMI Cable 4 core (Low Voltage)
It is recommended that installation and maintenance of this equipment should be
done with reference to the current edition of the I.E.E. wiring regulations (BS7671)
by suitably qualified/trained personnel.
These regulations contain important requirements regarding safety of electrical
equipment (for International Standards refer to I.E.C/ directive IEC950).
WARNING
It is important that the IHMC6-3 is not mounted directly to any flammable material
i.e. wood. It is recommended that the heatsink be speced off the mounting wall
using pillars to aid in heat dissipation.
General Instructions
Read these instructions carefully before installation and use. Keep this manual
for future reference.
The product may only be used as set out in the assembly and operating
instructions. The guarantee is only valid if the product is used in the manner
intended and in accordance with the instructions.
Packaging
Packaging materials are chosen with consideration to environment and are therefore
recyclable.
Handling of product at end of working life
This product may contain substances necessary for functionality of product but
potentially dangerous for the environment. The product should not be disposed
mixed with general household waste but delivered to a designated collection point
for environmental recycling. Please contact local authority for further details of your
nearest designated collection point.