MODBUS LITE V5.01 parameter specification

MODBUS parameters "ebm-papst series 84 / 112 / 150 / 200"
_______________________________________________________________________________________
ebm-papst Mulfingen GmbH & Co. KG
Bachmühle 2 ·74673 Mulfingen, Germany ·Phone: [phone] ·Fax: [phone] ·www.ebmpapst.com ·[e-mail]
DocNo.: 634505DocNo.: 446144DocNo.:358982DocNo.:322523DocNo.:309753DocNo.:303997DocNo.:276241DocNo.:256078DocNo.:196392 ·Template: 2 dated 6 October 2003 ·File: ext001157859.doc ·Last printed 10/03/2015 15:13:00
·Page 37 of 70
Form 1003
2.16 Maximum modulation level
Address of parameter set 1 : D10E
Address of parameter set 2 : D10F
Write authorisation : ebm-papst, customer
The "Internal parameter set" parameter is used to select whether the value in "Maximum modulation level
(parameter set 1)" or the value in "Maximum modulation level (parameter set 2)" is applicable (see 2.13
Internal parameter set).
Encoding:
%100
256
[%]Max. 
bytes Data
level modulation
The MSB is of no relevance!
Limitation:
8% < Maximum modulation level < Maximum permissible modulation level
(see 2.21 Maximum permissible modulation level)
2.17 Minimum modulation level
Address of parameter set 1 : D110
Address of parameter set 2 : D111
Write authorisation : ebm-papst, customer, end customer
The "Internal parameter set" parameter is used to select whether the value in "Minimum modulation level
(parameter set 1)" or the value in "Minimum modulation level (parameter set 2)" is applicable (see 2.13
Internal parameter set).
Encoding:
%100
256
[%]Min. 
bytes Data
level modulation
The MSB is of no relevance!
Limitation:
Minimum modulation level > Minimum permissible modulation level
(see 2.22 Minimum permissible modulation level)