FC101 Design Guide

4.3.1 Options and Accessories 53
4.3.2 Harmonic Filters 54
4.3.3 External RFI Filter 55
5 Installation
56
5.1 Electrical Installation
56
5.1.1 Mains and Motor Connection 58
5.1.2 EMC-compliant Electrical Installation 64
5.1.3 Control Terminals 66
6 Programming
67
6.1 Introduction
67
6.2 Local Control Panel (LCP)
67
6.3 Menus
68
6.3.1 Status Menu 68
6.3.2 Quick Menu 68
6.3.3 Main Menu 82
6.4 Quick Transfer of Parameter Settings between Multiple Frequency Converters
83
6.5 Readout and Programming of Indexed Parameters
83
6.6 Initialization to Default Settings
83
7 RS485 Installation and Set-up
84
7.1 RS485
84
7.1.1 Overview 84
7.1.2 Network Connection 84
7.1.3 Frequency Converter Hardware Set-up 84
7.1.4 Parameter Settings for Modbus Communication 85
7.1.5 EMC Precautions 85
7.2 FC Protocol
86
7.2.1 Overview 86
7.2.2 FC with Modbus RTU 86
7.3 Parameter Settings to Enable the Protocol
86
7.4 FC Protocol Message Framing Structure
86
7.4.1 Content of a Character (Byte) 86
7.4.2 Telegram Structure 86
7.4.3 Telegram Length (LGE) 87
7.4.4 Frequency Converter Address (ADR) 87
7.4.5 Data Control Byte (BCC) 87
7.4.6 The Data Field 87
7.4.7 The PKE Field 87
Contents Design Guide
MG18C822 Danfoss A/S © 04/2018 All rights reserved.