OPTIGO 10 USER MANUAL

Table of contents
Chapter 1 About this manual 5
Mer information 5
Chapter 2 Introduction to Optigo 6
Optigo controllers 6
Chapter 3 Technical data 8
Chapter 4 Installation and wiring 10
Installation 10
Wiring 11
Supply voltage 11
Inputs and outputs 11
Chapter 5 Control modes 14
Control modes 1, 2 and 3 14
Control mode 4, Radiator circuit control with
outdoor curve 19
Control mode 5 20
Chapter 6 Display and encoder 22
The Basic level 22
The 3 second level 23
The 10-second level 23
Display symbols 23
Chapter 7 Setpoint 24
Chapter 8 Alarm handling 25
Chapter 9 Clock and scheduler 26
Real time clock 26
Scheduler, general 26
Scheduler, control modes 1, 2 and 3 26
Menus 0.1 – 0.8 26
Menu 0.9, Override 27
Menu OK 27
Scheduler, control mode 4 27
Menus 0.1 – 0.8 27
Menu 0.9, Setback 28
Menu OK 28
Chapter 10 Configuration 29
Menus 1.0 – 5.0 29
Menus X.1 Output type (control modes 1, 2, 3 and 4)
(where X depends on your choice of alternative above) 29
Menus X.2 Output signals (control modes 1, 2, 3) 29
Menus X.3 Neutral zone (Control modes 1, 2 and 3) 30
Menus X.4 P-band 31
Menus X.5 I-time 31