Operating Instructions

KPB
GENERAL RULES REGARDING THE ELECTRIC SUPPLY TO THE PRODUCT
According to the safety rules, products using electricity must be
connected to an efficient ground electric gateaway. In case of doubt ask
for a deep electric installation check and be sure that it is carried out by
a qualified person. The manufacturer of this product will not accept any
claim for damages caused by the lack of a ground wire in the
installation.
Check that the electric installation is the right one according to the
maximum product electric input, and make sure that the wire section of
the installation is suitable for the product electric input.
According to the safety rules, an unipolar switch is required for
connection to the electric supply.
When using products consuming electric energy, it is obligatory to
respect the following fundamental rules:
 Do not touch the product when part of the body is humid or wet, or
when bare feet.
 Do not pull from the electric wires.
 Avoid the product exposure to atmospheric agents (snow, rain, sun,
etc).
 Never allow the product manipulation by unqualified persons.
The person(s) installing this product must make sure that once it will be
at work, this complies with the following directives:
 Low voltage directive (2006/95/EC and EC/93/68).
 Machinery directive (2006/42/EC).
 Electromagnetic compatibility directive (2004/108/EC).
5