Operating Instructions

KPB

Check control of the product components

 Make the shaft(s) turning by hand and make sure they turn freely.

 Clean the product before installation.

 Check that motor(s) turn on the right direction.

Maintenance

 Check always the product before putting it at work, and after having

remained at stand still for a long period of time.

 Check all bearings once a month, and if necessary, apply the suitable

grease.

 Revise the belt(s) tightened once a month.

 Revise the fan impeller and housing once a month.

Bearings

Bearings of the different components on this product are already

lubricated, and therefore the must not be lubricated before the first

installation of the product. Under normal working conditions, bearings

must be lubricated after 20.000 working hours or 2 years, wathever is

first, and for lubrication, it must be used Lithium based grease with the

specifications Type K3K-30 DIN 51825 and consistency NLGI-3. Bearings

must not be removed from their housing for lubrication purposes.

ATTENTION

All products equipped with electric and moving rotors with IP protection

degree (CEI Standard) must be kept out of people reaching, and in case

of need protected by the necessary elements. Systemair manufactures a

wide range of components for protection. Please consult our catalogue.

Installation of the product, must be done according to the rules applying

in each country.