DataSheet TUNE S202008

Dampers | 3 / 8
Description
Tune-S is a control and shut off damper for rectangular ducts. It is available in with blade tightness class C4,
tested according to EN 1751. It is ideal for use as a control and shut-off damper where different parts of the system
need to be airtight separated from each other It can be used on air handling units as outer shut-off damper
or with modulating actuator as control damper. The damper can be supplied in a manual or motorized version
with position indicator. The maximum recommended duct pressure is 1000 Pa.
Design
TUNE-S units are made from sheet steel frame and Aluminium prole blades. The frame has 20 mm wide anges
or tight connection to the duct..
The aerofoil blades are from extruded aluminium. The blades are equipped by rubber gaskets eliminating
leakage in closed position. The blade axe are sitting in self lubricating bearings which are connected together
by a cog - rod combination to assure a smooth ratio and transition from blade to blade.