SYSCOIL COMFORT Engineering Data Manual (EDM SCC 01 S 2GB)

SYSCOIL COMFORT
2
New range of fan coil units SYSCOIL COMFORT:
"Innovation for an optimum comfort"
Easy to install, improvement in sound levels and
performances, SysLogic electronic control, etc., are
the key developments carried on our fan coil units.
The SYSCOIL COMFORT II fan coil unit range is issued
from that development striving to meet customers’
wishes and advices.
Aesthetic of the grille, associated with the casing
rened nish allows a harmonious and smart
integration of the fan coil units SYSCOIL COMFORT in
all types of interiors.
They are the ideal solution to air condition agreeably
and efciently, ats, hotels, hospitals, ofces and
other premises, all year long.
The SYSCOIL COMFORT fan coil units range includes 8
sizes with air ows ranging from 68 to 1 548 m
3
/h,
for cooling capacities of 510 to 9 070 W and for
heating capacities of 610 to 12 900 W.
The SYSCOIL COMFORT fan coil units are equipped
with optimized coils to bring the best possible
performances in 2-pipes, 4-pipes, or 2-pipes/2-
wires versions.
SYSCOIL COMFORT range is provided with an
electronic control : SysLogic, whose ergonomic and
discrete remote command can be loose or tted on
the fan coil unit.
All settings being made at factory, no needs to be
done by installer.
This control, especially innovating, offers as standard
a master/slave function up to 15 units from one
single remote control.
Other features like window contact, occupied/
unoccupied, antifreeze modes are integrated without
involving any price add.
Design features
Cabinet
All units are manufactured from heavy-gauge zinc
coated sheet steel for long life and durability. Oven
baked powder epoxy paint insures a good protection
and an attractive nish for all outside panels (Standard
colour : RAL 9003).
The standard discharge grille is made of "ABS" plastic
and has a different colour from the cabinet (standard
colour : Pantone 427C).
On the versions with optional front intake, monobloc
grille, painted in RAL 9003, is mounted ush to the
cabinet. Grille can be removed by releasing the two
quarter turn xing screws to get access to the lter.
Casing
Made of galvanized steel insulated with closed cell
polyethylene foam. Casing has 3 slotted lugs on its
rear side which allow the unit to be easily and quickly
installed at site, in wall or ceiling mounting.
Access to all internal components of the unit is
facilitated by an easy dismounting of the casing.
Condensate drain pan is made from galvanized sheet
steel coated with closed cell polyethylene foam on
external face. The drain pan is painted to ensure the
anticorrosion protection.
All models are equipped with an inclined condensate
drain pan to ensure optimal condensate draining and
to minimize water retention.
SYSCOIL COMFORT is equipped with a condensate
drain pan monoblock including the auxiliary pan.
Coils
Made of staggered copper tubes, mechanically
expanded into aluminium ns, assuring maximum
heat transfer efciency.
The units are equipped, in their standard 2-pipes
conguration, with a main chilled water coil with 2
rows (SCC10), 3 rows (SCC20 to SCC80).
In the 4-pipes conguration, the unit is equipped , in
the same block with 3 rows (SCC10), 4 rows (SCC20
to SCC80), with chilled water coil and heated water
coil 1 row (on an independent circuit).
Each coil is supplied with headers having air vent at
the highest point and drain plug at the lowest point.
Note : The water connection side is dened left-hand
or right-hand when observer is looking at the unit
from the discharge side.