SYSLOGIC – Installation Operation Manual (IOM LOGIC 02 N 3GB)

English
Mode
1
2
3 4
3
4
8
9
7
6
5
2
1
Mode
Mode
Mode
Mode
Mode
di
Aib
AiL
H
2
O
rEA
D.I. status
RAT
readout
LCD ntc
readout
WPT
readout
P11 setpoint
5 seconds
Information
If left unused for 15 seconds, the keypad times out and reverts to the main window.
Information
To switch the device on/off, the button ( ) must be pressed for 5 seconds.
To activate modication of the set-point, one of the buttons ( / ) must be pressed for 3
seconds.
9SYSLOGIC
4. USER INTERFACE
4.1. MRC/WRC REMOTE TERMINAL
4.1.1. KEYS
No. Description of keys
1
- Ventilation control
- Esc function in programming menu
2
Down key:
- Decrease values
- Scroll through values
3
Up key:
- Increase values
- Scroll through values
4
- Switch ON/OFF by pressing and holding for 5 seconds
- Change mode by pressing once
4.1.2. DISPLAY
No. Description of icons
1
Heating Mode
2
Cooling Mode
3
Auto mode
4
Stand-by
5
Minimum fan speed
6
Medium fan speed
7
Maximum fan speed
8
Automatic fan speed
9
3 Digits with decimal point
PAR. Description
rEA
Room temperature set-point
H
2
O
Water temperature (WPT)
AiL
Air temperature measured by the remote control (RCT)
Aib
Air temperature measured by the air return sensor (RAT)
di
Configuring input DI1:
1. = Eco mode
2. = On/Off
4.1.3. CONTROL MENU
This menu allows the values of the unit sensors to be read.